Technical Data Sheet Chip LED with Bi-Color (Multi-Color) 19-22/R6BHC-B01/2T Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 19-22 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Emitted Color Type Material R6 AlGalnP Brilliant Red BH InGaN Blue Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Resin Color Water Clear Rev :1 Page: 1 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T Package Outline Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Rev :1 Page: 2 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF R6:25 BH:25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP R6:60 mA BH:100 R6:60 Power Dissipation Pd mW Electrostatic Discharge(HBM) ESD Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol BH:95 R6:2000 V BH:150 Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Rev :1 Page: 3 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T Electro-Optical Characteristics (Ta=25) Parameter Symbol Iv Luminous Intensity Viewing Angle Min. Typ. R6 14.5 20.0 BH 14.5 20.0 ----- 120 21/2 p Peak Wavelength d Dominant Wavelength R6 BH Spectrum Radiation Bandwidth VF Forward Voltage IR 468 617.5 mcd ----- deg ----- nm 629.5 467.5 Condition nm IF=5mA 472.5 20 ----- 25 ----- 1.9 2.3 2.9 3.3 nm V ------ R6 BH ----- ------ R6 BH Reverse Current ----- R6 BH Unit 632 R6 BH Max. ----- ----- 10 50 A VR=5V Notes: 1.Tolerance of Dominant Wavelength 1nm Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Rev :1 Page: 4 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T R6 Bin Range Of Luminous Intensity Bin Min Max 1 617.5 621.5 2 621.5 625.5 3 625.5 629.5 Unit Condition nm IF =5mA Unit Condition nm IF =5mA BH Bin Range Of Luminous Intensity Bin Min Max 2 467.5 470.0 3 470.0 472.5 Notes: 1.Tolerance of Dominant Wavelength 1nm Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Rev :1 Page: 5 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T Typical Electro-Optical Characteristics Curves R6 Ta=25C Ta=25C I (mA) 100 75 Forward Current Relative luminous intensity (%) Spectrum Distribution 50 25 0 500 550 600 650 700 Wavelength (nm) Forward Voltage VF (V) Relative luminous intensity ( %) Relative luminous intensity ( % ) Ta=25C Ambient Temperature Ta(C ) Forward Current I (mA) Forward Current I (mA) Ta=25C Ambient Temperature Ta (C ) Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Rev :1 Page: 6 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T Typical Electro-Optical Characteristics Curves BH Ta=25C Forward Current I (mA) Relative luminous intensity ( % ) Ta=25C Wavelength (nm) Forward Voltage VF (V) Relative luminous intensity ( %) Relative luminous intensity ( % ) Ta=25C 1000 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta(C ) Forward Current I (mA) Forward Current I (mA) Ta=25C Ambient Temperature Ta (C ) Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Rev :1 Page: 7 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T Label explanation CAT: Luminous Intensity Rank EVERLIGHT HUE: Dom. Wavelength Rank Pb REF: Forward Voltage Rank CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Rev :1 Page: 8 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Desiccant Label Rev :1 Page: 9 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Rev :1 Page: 10 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Rev :1 Page: 11 of 12 Prepared by: Lina jing 19-22/R6BHC-B01/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No: Prepared date: 1-Jul-2011 Rev :1 Page: 12 of 12 Prepared by: Lina jing