3MTM MetPakTM 2-FB Inverse Header 2 mm 5-Row, Right Angle, Solder Tail MP2 Series * * * * * * * * Three levels of early mate, late break (EMLB) sequencing or selective loading options Footprint compatible with standard Futurebus+(R) Solder tail with true-position wafer Ideal for hot swapping applications End-to-end stackable Right angle male for daughter card Mates with MP2-R for backplane applications and MP2-SXXXG for coplanar applications * RoHS Compliant. See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: September 17, 2013 TS-1122-C Sheet 1 of 4 Physical Insulation: Material: High Temp LCP Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 50 " [1.27 m] Nickel Wiping Area: See Ordering Information Solder Tails: See Ordering Information Electrical Current Rating: Signal: 1.5 A - All contacts simultaneously Insulation Resistance: 103 M Withstanding Voltage: 1000 VAC Environmental Temperature Rating: -55C to +125C Process Temperature Rating: 260C (Profile per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com MetPak is a trademark of 3M Company. Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE) 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Inverse Header 2 mm 5-Row, Right Angle, Solder Tail MP2 Series POSITION 1 POSITION 2 17.00 .669 13.00 .512 "A" 2.00 .079 TYP. POSITION X MATED WITH MP2-RXXX-5XXX-XXXX E D C B A ROW 17.80 .701 1.50 .059 2.00 .079 4X 7.00 .276 MATING LENGTH 16.80 .662 3.86 .152 mm [inch] 4.00 .157 Tolerance Unless Noted mm 0 0.0 0.00 3 0.3 0.13 [ ] Dimensions for Reference Only 13.90 .547 3.75 .148 Notes: 1. Refer to IEC 61076-4-104 Futurebus+(R) global standard. 2. For special pin arrangements, contact 3M. 2.00 .079 8.00 .315 4X 2.00 .079 TAIL LENGTH TYP. "B" Ordering Information MP2 - PXXX - 5XM1 - XXXXX P = Right Angle Header Inversed Plating Options (See Table 3) Pin Count (See Table 1) Rows 5 = 5 Rows Loading Pattern and Tail Length (See Table 2) Termination Style M = Solder Tail TS-1122-C Sheet 2 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Inverse Header 2 mm 5-Row, Right Angle, Solder Tail MP2 Series Table 1 - Connector & Row Lengths Pin Count Dim. "A" mm [inch] Dim "B" mm [inch] Rows 030 11.95 [0.471] 10.00 [0.394] 5 060 23.95 [0.943] 22.00 [0.866] 5 090 35.95 [1.415] 34.00 [1.339] 5 120 47.95 [1.889] 46.00 [1.811] 5 150 59.95 [2.36] 58.00 [2.283] 5 180 71.95 [2.833] 70.00 [2.756] 5 210 83.95 [3.305] 82.00 [3.228] 5 240 95.95 [3.778] 94.00 [3.701] 5 270 107.95 [4.251] 106.00 [4.173] 5 300 119.95 [4.722] 118.00 [4.646] 5 420 167.95 [6.612] 166.00 [6.535] 5 Table 2 - Mate & Tail Lengths, mm vs. Loading Pattern Description Mate Length Row A Mate Length Row B Mate Length Row C Mate Length Row D Mate Length Row E Tail Length Row A Tail Length Row B Tail Length Row C Tail Length Row D Tail Length Row E 1 All Positions Filled 5.00 5.00 5.00 5.00 5.00 3.30 3.30 3.30 3.30 3.30 2 All Positions Filled 4.25 5.00 5.00 5.00 5.00 4.05 3.30 3.30 3.30 3.30 3 All Positions Filled 3.50 4.25 4.25 5.00 5.00 4.80 4.05 4.05 3.30 3.30 4 All Positions Filled 4.25 5.00 4.25 4.25 4.25 4.05 3.30 4.05 4.05 4.05 5 Rows A, B, C and D Filled 5.00 5.00 5.00 5.00 NA 3.30 3.30 3.30 3.30 NA 6 Rows A, B, C and D Filled 5.00 4.25 4.25 5.00 NA 3.30 4.05 4.05 3.30 NA 7 All Positions Filled 4.25 5.00 4.25 5.00 4.25 4.05 3.30 4.05 3.30 4.05 8 All Positions Filled 4.25 4.25 4.25 4.25 4.25 4.05 4.05 4.05 4.05 4.05 9 All Positions Filled 5.00 3.50 3.50 3.50 4.25 3.30 4.80 4.80 4.80 4.05 A All Positions Filled 3.75 4.50 5.25 4.50 3.75 4.55 3.80 3.05 3.80 4.55 B All Positions Filled 3.75 4.50 3.75 4.50 3.75 4.55 3.80 4.55 3.80 4.55 C All Positions Filled 5.75 5.75 5.75 5.75 5.75 2.55 2.55 2.55 2.55 2.55 D All Positions Filled 4.25 5.00 5.75 5.00 4.25 4.05. 3.30 2.55 3.30 4.05 E All Positions Filled 5.00 5.75 5.75 5.75 5.00 4.05 4.05 4.05 4.05 4.05 G Rows A, B, C and D Filled 5.00 4.25 4.25 5.00 NA 3.30 4.05 4.05 3.30 NA Loading Pattern Code Table 3 - Plating Plating Suffix Plating Composition 0.76 m [30 "] Min. Au Contact Area KR (RIA E1 & C1 apply) 2.54 m [100 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over 0.08 m [3 "] Min. Au Contact Area LR (RIA E1 & C1 apply) 0.67 m [27 "] Min. PdNi Contact Area 2.54 m [100 "] Min. Matt Whisker Mitigating Sn Tail Area 1.27 m [50 "] Min. Ni all over TS-1122-C Sheet 3 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM MetPakTM 2-FB Inverse Header 2 mm 5-Row, Right Angle, Solder Tail MP2 Series 8.00 .315 2.00 .079 2.00 .079 4.00 .157 4X TYP. A1 1.00 .039 4.00 .157 12.00 .472 "B" 2.05 .081 O +.05 -.00 +.002 -.000 TYP. UNPLATED THRU HOLE O O 1.50 .059 +.10 -.00 +.004 -.000 TYP. UNPLATED THRU HOLE O 3.00 .118 "D" PLATED THRU HOLE O .10 .10 .10 RECOMMENDED PCB HOLE MOUNTING PATTERN Table 4 - HOLE PLATING FINISHES HOLE Finished Dia. MM [in] Cu Thickness [mm [in] Immersion Matte Sn Thickness microns ["] Electrolytic Au Thickness microns ["] OSP ENTEK Thickness microns ["] Drilled Hole Dia. mm [in] "D" 0.700-0.800 [.0276-.0315] 0.025-0.045 [0.001-0.002] 0.5 - 2.5 [20 - 100] 0.1 - 0.5 [4 - 20] 0.2 - 0.5 [8 - 20] 0.830-0.860 [.0330.0340] or 0.85 mm [#66] TWIST DRILL 1.25 INITIAL .049 OFFSET ALLOWABLE 1.00 INITIAL .039 OFFSET ALLOWABLE 1.5 1 INCLINATION TOLERANCES TS-1122-C Sheet 4 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com Please recycle. Printed in USA. (c) 3M 2013. All rights reserved. RIA-2217B-E