BAT46W-V
Document Number 85663
Rev. 1.4, 05-Aug-10
Vishay Semiconductors
www.vishay.com
1
17431
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Small Signal Schottky Diode
Features
For general purpose applications
This diode features very low turn-on
voltage and fast switching.
This device is protected by a PN junction
guard ring against excessive voltage,
such as electrostatic discharges.
This diode is also available in the DO-35 case with
the type designation BAT46 and in the MiniMELF
case with the type designation LL46.
AEC-Q101 qualified
Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Mechanical Data
Case: SOD-123
Weight: approx. 10.3 mg
Packaging Codes/Options:
GS18/10 k per 13" reel (8 mm tape), 10 k/box
GS08/3 k per 7" reel (8 mm tape), 15 k/box
Parts Table
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
1) Valid provided that electrodes are kept at ambient temperature
Part Ordering code Type Marking Remarks
BAT46W-V BAT46W-V-GS18 or BAT46W-V-GS08 L6 Tape and Reel
Parameter Test condition Symbol Value Unit
Repetitive peak reverse voltage VRRM 100 V
Forward continuous current IF1501) mA
Repetitive peak forward current tp < 1 s, δ < 0.5 IFRM 3501) mA
Surge forward current tp < 10 ms IFSM 7501) mA
Power dissipation1) Tamb = 65 °C Ptot 1501) mW
www.vishay.com
2
Document Number 85663
Rev. 1.4, 05-Aug-10
BAT46W-V
Vishay Semiconductors
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Thermal Characteristics
Tamb = 25 °C, unless otherwise specified
1) Valid provided that electrodes are kept at ambient temperature
Electrical Characteristics
Tamb = 25 °C, unless otherwise specified
2) Pulse test tp < 300 µs, δ < 2 %
Typical Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter Test condition Symbol Value Unit
Thermal resistance junction to ambient air RthJA 3001) K/W
Junction temperature Tj125 °C
Ambient operating temperature range Tamb - 55 to + 125 °C
Storage temperature range Tstg - 55 to + 150 °C
Parameter Test condition Symbol Min Typ. Max Unit
Reverse breakdown voltage IR = 100 µA (pulsed) V(BR) 100 V
Leakage current2)
VR = 1.5 V IR0.5 µA
VR = 1.5 V, Tj = 60 °C IRA
VR = 10 V IR0.8 µA
VR = 10 V, Tj = 60 °C IR7.5 µA
VR = 50 V IRA
VR = 50 V, Tj = 60 °C IR15 µA
VR = 75 V IRA
VR = 75 V, Tj = 60 °C IR20 µA
Forward voltage2)
IF = 0.1 mA VF250 mV
IF = 10 mA VF450 mV
IF = 250 mA VF1000 mV
Diode capacitance VR = 0 V, f = 1 MHz CD10 pF
VR = 1 V, f = 1 MHz CD6pF
Figure 1. Typical Instantaneous Forward Characteristics
I - Forward Current (mA)
F
1000
100
10
1
0.1
0.01 1.2 1 0.8 0.6 0.4 0.2 0
18546
V
F - Forward Voltage (V)
= 60 °CT
j
25 °C
Figure 2. Typical Reverse Characteristics
18547
I- Reverse Leakage Current (µA)
R
0.01
0.1
1
10
100
020406080100
VR- Reverse Voltage (V)
Tj= 60 °C
Tj= 25 °C
BAT46W-V
Document Number 85663
Rev. 1.4, 05-Aug-10
Vishay Semiconductors
www.vishay.com
3
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Package Dimensions in millimeters (inches): SOD-123
Figure 3. Admissible Power Dissipation vs. Ambient Temperature
200
18548T
amb
- Ambient Temperature (°C)
250
200
150
100
50
50 100 1500
0
P - Power Dissipation (mW)
tot
0.1 (0.004) max.
2.85 (0.112)
2.55 (0.100)
3.85 (0.152)
3.55 (0.140)
1.7 (0.067)
1.40 (0.055)
Mounting Pad Layout
2.5 (0.098)
0.85 (0.033) 0.85 (0.033)
0.85 (0.033)
Cathode bar
0.65 (0.026)
0.45 (0.018)
0.10 (0.004)
1 (0.039)
0.15 (0.006)
1.35 (0.053)
0.2 (0.008)
0° to 8°
0.45 (0.018)
0.25 (0.010)
0.5 (0.020) ref.
Rev. 4 - Date: 24. Sep. 2009
Document no.: S8-V-3910.01-001 (4)
17432
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.