Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series FEATURES * LOW IMPEDANCE & ESR AT HIGH FREQUENCY RoHS * HIGH RIPPLE CURRENT Compliant * REPLACES MULTIPLE TANTALUM CHIPS IN POWER SUPPLIES includes all homogeneous materials * FITS EIA (7343) "D" LAND PATTERNS * Pb-FREE (GOLD TERMINATION PLATING) *See Part P Number N b S System ffor D Details il * COMPATIBLE WITH +260C* REFLOW SOLDERING CHARACTERISTICS Rated Working Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current (A) After 5 Minutes (+20C) 2.0 ~ 10VDC 10 ~ 470F -55 ~ +105C 20% (M) Surge Voltage (1000 cycles, 30 sec. on, 5 min. 30 sec. off, 1K) Working Voltage (Vdc) 2.0 2.5 4.0 6.3 8.0 10 Surge Voltage (Vdc) 2.6 3.2 5.2 8.2 10.4 11.5 Max. Tan , 120Hz, +20C High Temperature Load Life 2,000 Hours @ 105C at Rated Working Voltage after 2x recommended reflow profile Moisture Resistance 500 Hours @ +60C at 90 ~ 95% RH and No Voltage Applied after 2x recommended reflow profile (JEDEC MSL-3) <0.04CV D1, D6 D7, D8 Capacitance Change <0.05 <0.1 Within 20% of initial measured value D7, D8 (D1 Less than 150% of specified max. value 10F/6.3V) D1, D6 Less than 200% of specified max. value Less than specified max. value Within -20%/+40% of initial measured value *Within -20%/+60% of initial measured value D7, D8 Less than 150% of specified max. value D1, D6 Less than 200% of specified max. value Less than 300% of specified max. value Less than 500% of specified max. value for D1 10F/6.3V *Applies to values with asterisk in column "NIC Part Number" Tan Leakage Current Capacitance Change Tan Leakage Current STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number (+260C Reflow) NPC101M2D1UATRF NPC101M2D1ZATRF NPC101M2D6XATRF NPC101M2D6ZATRF NPC121M2D6ZATRF NPC151M2D1UATRF NPC151M2D6ZATRF NPC181M2D6ZATRF NPC221M2D6YATRF NPC221M2D6ZATRF NPC221M2D7XATRF NPC271M2D6ZATRF NPC271M2D6YATRF NPC271M2D8YATRF NPC331M2D6ZATRF* NPC331M2D6YATRF* NPC331M2D6UATRF* NPC331M2D8YATRF NPC391M2D8YATRF NPC471M2D8YATRF NPC820M2.5D1ZATRF NPC820M2.5D6XATRF NPC820M2.5D6ZATRF NPC101M2.5D1UATRF NPC101M2.5D6ZATRF NPC121M2.5D1UATRF NPC121M2.5D6ZATRF NPC151M2.5D6ZATRF NPC181M2.5D6ZATRF WV (Vdc) 2 2.5 Cap. (F) 100 100 100 100 120 150 150 180 220 220 220 270 270 270 330 330 330 330 390 470 82 82 82 100 100 120 120 150 180 Max. LC (A) 8.0 8.0 8.0 8.0 9.6 12.0 12.0 14.4 17.6 17.6 17.6 21.6 21.6 21.6 26.4 26.4 26.5 26.4 31.2 37.6 8.2 8.2 8.2 10.0 10.0 12.0 12.0 15.0 14.4 Tan 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.10 0.05 0.05 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 Max. Ripple Current (mArms) Max. ESR 100KHz @ +105C +20C & 100KHz () 3,000 0.005 3,000 0.009 3,000 0.013 3,000 0.009 3,000 0.009 3,000 0.005 3,000 0.009 3,000 0.009 3,000 0.007 3,000 0.009 3,500 0.010 3,000 0.009 3,500 0.006 3,500 0.007 3,000 0.009 3,500 0.006 3,500 0.0045 3,500 0.007 3,500 0.007 3,500 0.007 3,000 0.009 3,000 0.013 3,000 0.009 3,000 0.005 3,000 0.009 3,000 0.005 3,000 0.009 3,000 0.009 3,000 0.009 Height H 0.1 1.4 1.4 1.9 1.9 1.9 1.4 1.9 1.9 1.9 1.9 2.7 1.9** 1.9** 2.9 1.9** 1.9** 1.9** 2.9 2.9 2.9 1.4 1.9 1.9 1.4 1.9 1.4 1.9 1.9 1.9 *See note regarding DF in characteristics table (Moisture Resistance). **height dimension tolerance 0.2mm NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 1 Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number (+260C Reflow) NPC181M2.5D7XATRF NPC221M2.5D6YATRF* NPC221M2.5D6ZATRF* NPC221M2.5D8YATRF NPC271M2.5D6ZATRF* NPC271M2.5D6YATRF* NPC271M2.5D8YATRF NPC331M2.5D8YATRF NPC680M4D1ZATRF NPC680M4D6XATRF NPC680M4D6ZATRF NPC820M4D6XATRF NPC101M4D6XATRF NPC121M4D6XATRF NPC151M4D6XATRF NPC151M4D7XATRF NPC181M4D6ZATRF NPC181M4D8ZATRF NPC221M4D6ZATRF NPC221M4D8ZATRF NPC271M4D8ZATRF NPC330M6.3D6XATRF NPC470M6.3D1XATRF NPC470M6.3D6XATRF NPC470M6.3D6ZATRF NPC560M6.3D6XATRF NPC680M6.3D6XATRF NPC820M6.3D6XATRF NPC101M6.3D6XATRF NPC101M6.3D7XATRF NPC121M6.3D6ZATRF* NPC121M6.3D8ZATRF NPC151M6.3D6ZATRF NPC151M6.3D8ZATRF NPC181M6.3D8ZATRF NPC221M6.3D8ZATRF NPC150M8D6XATRF NPC220M8D6ATRF NPC330M8D6ATRF NPC330M8D7XATRF NPC470M8D6ATRF NPC680M8D7ATRF NPC101M8D7ATRF NPC220M10D6ATRF NPC470M10D6ATRF WV (Vdc) 2.5 4.0 6.3 8 10 Cap. (F) 180 220 220 220 270 270 270 330 68 68 68 82 100 120 150 150 180 180 220 220 270 33 47 47 47 56 68 82 100 100 120 120 150 150 180 220 15 22 33 33 47 68 100 22 47 Max. LC (A) 18.0 22.0 22.0 22.0 27.0 27.0 27.0 33.0 10.9 10.9 10.9 13.1 16.0 19.2 24.0 24.0 28.8 28.8 35.2 35.2 43.2 8.3 11.8 11.8 11.8 14.1 17.1 20.7 25.2 25.2 30.2 30.2 37.8 37.8 45.4 55.4 4.8 7.0 10.6 10.6 11.8 21.8 32.0 8.8 18.8 Please contact NIC for additional values (example: 10uF @ 6.3VDC) RIPPLE CURRENT FREQUENCY CORRECTION FACTORS 2 Frequency 1KHz <=f< 10KHz 10KHz <=f< 100KHz 100KHz <=f< 1MHz Correction Factor 0.6 0.85 1.0 NIC COMPONENTS CORP. www.niccomp.com Tan 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.10 0.05 0.10 0.05 0.10 0.10 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.10 0.05 0.10 0.05 0.10 0.10 0.10 0.05 0.05 0.05 0.10 0.05 0.10 0.10 0.10 0.10 Max. Ripple Current (mArms) Max. ESR 100KHz @ +105C +20C & 100KHz () 3,500 0.010 3,500 0.006 3,000 0.009 3,500 0.007 3,000 0.009 3,500 0.006 3,500 0.007 3,500 0.007 3,000 0.009 3,000 0.013 3,000 0.009 3,000 0.010 3,000 0.010 3,000 0.010 3,000 0.010 3,500 0.010 3,000 0.009 3,500 0.009 3,000 0.009 3,500 0.009 3,500 0.009 3,000 0.013 3,000 0.010 3,000 0.013 3,000 0.009 3,000 0.010 3,000 0.010 3,000 0.010 3,000 0.010 3,500 0.010 3,000 0.009 3,500 0.009 3,000 0.009 3,500 0.009 3,500 0.009 3,500 0.009 3,000 0.015 2,500 0.018 2,500 0.018 3,000 0.013 2,500 0.018 2,500 0.018 2,500 0.018 1,600 0.030 1,800 0.025 Height H 0.1 2.7 1.9** 1.9** 2.9 1.9** 1.9** 2.9 2.9 1.4 1.9 1.9 1.9 1.9 1.9 1.9 2.7 1.9** 2.9 1.9** 2.9 2.9 1.9 1.4 1.9 1.9 1.9 1.9 1.9 1.9 2.7 1.9** 2.9 1.9** 2.9 2.9 2.9 1.9 1.9 1.9 2.7 1.9 2.7 2.7 1.9 1.9 *See note regarding DF in characteristics table (Moisture Resistance). **height dimension tolerance 0.2mm www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series PART NUMBERING SYSTEM NPC 101 M 6.3 D7 X A TR 500 F Series RoHS Compliant Optional 500 piece reel qty Tape & Reel Packaging Denotes +260C Peak Reflow Performance Code (see Standard Products & Specifications Tables) Case Size Working Voltage (Vdc) Tolerance Code M=20%, K=10% Capacitance Code in F, first 2 digits are significant, third digits no. of zeros DIMENSIONS (mm) Case Code L 0.2 W 0.2 H 0.1 W1 0.1 D1 1.4 1.9* D6 7.3 4.3 2.4 D7 2.7 D8 2.9 *D6 - See Standard Products & Specifications Tables for height tolerance. S 0.2 TERMINATION MATERIAL: Au: 0.003 ~ 0.014m Pd: 0.02 ~ 0.07m Ni: 0.5 ~ 2.0m 1.3 Cu: 100 8m Ni: 0.5 ~ 2.0m Pd: 0.02 ~ 0.07m Au: 0.003 ~ 0.014m H S W1 L W Anode Polarity Indicator VOLTAGE CODES Capacitance Value Lot Number 220 d58 + Voltage 2.0VDC 2.5VDC 4.0VDC 6.3VDC 8.0VDC 10VDC W1 Voltage Code RECOMMENDED LAND PATTERNS (mm) a 2.4 b 2.9 RECOMMENDED REFLOW SOLDERING PROFILE c 3.7 COMPONENT SURFACE TEMP. (oC) Case Code D1, D6, D7, D8 B A C Code d e g j k A A Peak Temperature 260C Max. for 10 sec. 260 250 230 NATURAL COOLING 200 150 100 Time Above 230C 40 sec. max. Pre-Heat 150oC ~ 180C 30 sec. max. 120 Sec. Max. 50 TIME (SECONDS) APPLICATION NOTES: 1. NPC Series cannot be used in coupling, time-constant or other circuits that are greatly affected by leakage current. 2. NPC parts are polarized so be sure to verify component orientation when mounting components. 3. Do not apply over voltage exceeding the rated voltage. 4. Do not apply ripple current over the specified maximum ripple current rating. NIC COMPONENTS CORP. www.niccomp.com NOTES ON REFLOW SOLDERING: 1. SAC alloy (+217C) reflow soldering compatible 2. Soldering heat limits apply to the top surface of component 3. If you have concerns about your reflow soldering profile review them with NIC to insure compatible [tpmg@niccomp.com] www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 3 Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series REEL TAPE DIMENSIONS (mm) Case Reel A 2.0 B 1.0 C 0.2 W 1.0 t 0.5 Code Quantity D1, D6 3,500 330 80 13 13.5 2.0 500* D7, D8 2,000 *See part number system for details on designating reel quantity TAPE DIMENSIONS (mm) Case A 0.1 B 0.1 Code D1 D6 4.50 7.60 D7 D8 D 0.05 12.0 E 0.1 5.5 F 0.1 1.75 G 0.05 8.0 2.0 H 0.1 4.0 J -0/+0.1 K 0.1 t 0.05 1.5 1.6 2.2 2.9 3.1 0.3 J G H E t C 0.3 + + 220 d58 + 220 d58 A B 220 d58 K B C D C F Anode W A t PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC's Electrolytic Capactitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC's technical support personnel: tpmg@niccomp.com 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com