PRODUCT SPECIFICATIONS Customer () Model () T150S-5RA001N-0A28R0-200FH Mode () Five-wire Analog Touch Panel Date () Jan. 04, 2008 Version () 6.1 Customer Approval HIGGSTEC INCORPORATED 8 F., No. 609, Wan Shou Rd., Sec. 1, Kweishan, Taoyuan Hsien 33350, Taiwan. TEL886-2-8209-9696 FAX886-2-8200-3030 E-mailinfo@higgstec.com.tw Approve Review Preparation Henry Andy Young TABLE OF CONTENTS 00. Specification Revision Record []................................................ 01 00. Dimension Drawing []........................................................... ........... 02 01. Scope []............................................................................................. 03 02. Features [].......................................................................................... 03 03. General Specification []................................................................... 03 04. Environmental Characteristics []..................................................... 03 05. Optical Characteristics []................................................................ 04 06. Electrical Characteristics []............................................................. 04 07. Mechanical Characteristics [].......................................................... 05 08. Reliability []...................................................................................... 05 09. Durability []............................................................................. ......... 05 10. Inspection Methods []..................................................................... 06 11. Appearance Inspection []................................................................ 07 12. Attention for Mounting Condition [].............................................. 08 13. Warranty []......................................................................................... 09 14. Appendices []..................................................................................... 09 Appearance Specification []....................................................... 11 15. Caution []........................................................................................ 10 Date: Jan. 04, 2008 Version: 6.1 SPECIFICATION REVISION RECORD Customer [] Customer NO. [] NO. Version. [] [] Date []Jan. 04, 2008 Model []T150S-5RA001N-0A28R0-200FH Date Summary of Changes Page [] [] [] Remarks[] Date: Jan. 04, 2008 Version: 6.1 Page: 01/11 01. Scope The specification is for Five-Wire Analog Resistive touch panel. [] [-] 02. Features [] (1) (2) (3) 03. General Specification (1) [] (2) (3) Item [] Type [] Specifications [] Five-Wire Analog Resistive [-] Input Mode [] Cable [] Item [] Frame Size [] View Area [] Active Area [] Total (4) Thickness Stylus or Finger [] FFC Specifications [] 332.900.30 X 248.900.30 mm 311.100.20 X 235.100.20 mm 307.100.20 X 231.100.20 mm 3.200.20 mm [] (5) 04. Environmental Characteristics Tail Length [] 205.006.00 mm Specifications [] Item [] [] Temperature [] Humidity [] (Non Condensing) [] (1) (2) Operation [] Storage [] -10C ~ +70C -40C ~ +80C 20%RH ~ 80%RH (See Figure 4-1) 10%RH ~ 85%RH (See Figure 4-1) Note: All terms under 1 atmosphere. [: 1 ] Figure 4-1 Date: Jan. 04, 2008 Version: 6.1 Page: 03/11 05. Optical Characteristics (1) [] (2) 06. Electrical Characteristics [] Item [] Transparency [] Haze [] Specifications [] 80% 3% (Measured by BYK-Gardner ) 10% 3% Item [] Loop (1) Resistance Specifications [] X:20~500, Y:20~500 (See Figure 6-1) [] (2) (3) (4) (5) Linearity [] Chattering [] Insulation [] Endurance [] X1.0%, Y1.0% (See Figure 10-2) 15ms 20M/25V(DC) No acting damage at DC50V/60sec. Figure 6-1 Loop Resistance X = short RT and RL , short LT and LL , measure the resistance between RT and LT Loop Resistance Y = short RT and LT , short RL and LL ,measure the resistance between RT and RL Date: Jan. 04, 2008 Version: 6.1 Page: 04/11 07. Mechanical Characteristics [] Item [] Operating Force Stylus=R0.8 [] [=R0.8] Impact 13.0DIA. Steel Ball/9g Height=30cm 1 time, no damage [Impact at center area] [13/9g [ 1 ,] [] Static Load [] Specification [] Condition [] 50g =30cm] 500g within 10cm area for Satisfy(1) of Item 7 and 30sec (1), (2),(4) of Item 6 [500g 10cm30 ] [ 7 (1) 6 (1),(2),(4)] Hardness 3H pencil, pressure 1N/45 [] [ 3H, 1N/45(JIS K5400)] Peeling 800g by vertical 90 Satisfy (1) of Item 6 [] [800g , 90] [ 6 (1)] Bending 13510 times left & right Satisfy (1) of Item 6 [] [135, 10 ] [ 6 (1)] 08. Reliability Item [] [] High Temperature /Humidity [] Specification [] 70C /90%RH, 500 hrs, allow panel stays in normal environment for 4 hrs [] Condition [] Reliability test may cause the film puffed yet the electric characteristic stays intact. (1), [70C /90%RH500 4 (2) of Item 5; (1), (4) of Item 6; (2) of item 6 satisfies ] High temperature 3H 70C /500 hrs allow panel stays X2.0%, Y2.0%;Actuation in normal environment for 4 hrs force must not exceed 150g [70C /500 4 ] after reliability test. Low temperature [] -40C /500 hrs allow panel stays in normal environment for 4 hrs [-40C /500 4 ] Thermal Cycle [] -40C ~70 [60 min./cycle] *100 cycles allow panel stays in normal environment for 4 hrs [ 5 (1)(2) 6 (1) (4) ; 6 (2) X2.0%, Y 2.0%; 150g] [-40C ~70C 60 100 4 ] 09. Durability Item [] Specification [] [] Condition [] Satisfy (1), (2) of Item 5; (1), (4) of Item 6; (2) of item 6 satisfies X2.0%, Y2.0%; Knock Test 35,000,000 times [] [3500 ] Actuation force must not exceed 150g after durability test. [ 5 (1)(2) 6 (1) (4) ; 6 (2) X2.0%, Y 2.0%; 150g] Date: Jan. 04, 2008 Version: 6.1 Page: 05/11 10. Inspection Methods [] (1) Linearity Condition [] Step 1: short RT and RL(or short RL and LL). Step 2: apply voltage DC 5V. Step 3: short LT and LL (or short RT and LT). Step 4: apply grounding. Step 5: draw points along LX and LY at 5.0mm intervals within pattern area and detect the voltage at SG. Step 6: measure the voltage differences between RT and LT (or RT and RL) (Fig 10-1) (Fig 10-2) [ RT , RL ( RL , LL ) 5V , LT , LL ( RT , LT ) 0V , 5.0mm , (stylus)( 2 LX LY), SG , RT LT ( RT RL ) ] (Fig 10-1) (Fig 10-2) Figure 10-1 Figure 10-2 Linearity: [Vxm-Vxi] / (Va-Vb) X 100% (2) Specification [] Linearity must meet the electrical characteristic specified in Item 6 [ 6 ] Date: Jan. 04, 2008 Version: 6.1 Page: 06/11 11. Appearance Inspection (1) A 17W fluorescent luminant lamp is used for appearance inspection. Detail settings are shown in (Fig 11-1) and (Fig 11-2). [] [(1) 17W (Fig11-1), (Fig11-2) ] (2) Minor impurities outside viewing area are acceptable unless their existance affect electrical functions. [(2) ] . Figure 11-1 Figure 11-2 (3) Glass Flaw [] Item [] Picture [] Specification [ ] X3.0mm Y3.0mm ZT Corner Flaw [] X3.0mm Y3.0mm ZT Edge Flaw [] Progressive Flaw Not allowed [] [] Note: T=Glass thickness (4) Please refer to AppendixAppearance Specification. [(4)( 1)] Date: Jan. 04, 2008 Version: 6.1 Page: 07/11 12. Attention of Mounting Condition (1) The gasket support of touch panel must allocate outside of Viewable Area. Reserve enough clearance between panel surface and enclosure for normal panel operation. [] To avoid pressing error, please retain enough space between surface panel and Bezel. [(support)(Viewable area) ] (2) Bezel opening must not touch Viewable Area, Bezel opening must be designed between Viewable Area and Active Area. [(Bezel opening)] (3) We recommend elastic material support. [] (4) Due to the conductive characteristic of the panel backside, prevent metal contact after mounting. [] (5) Do not use adhesive to bond top surface (ITO Film) of touch panel with enclosure. [] (6) Proper grounding of controller at all times assure normal operation. [] Figure 12-1 Date: Jan. 04, 2008 Version: 6.1 Page: 08/11 13. Warranty HIGGSTEC comes with a 2-year limited warranty on all Five-Wire Analog products. [] [ 3 2 ] Limited warranty does not cover the following situations: [] 1. Damages caused by improper handling from clients, including shipping, installation and integration. [,] 2. Damages caused by either natural or human factors after receiving the products. [,] 3. Damage caused by self-repairs, modifications or disassembling of the product. [] 14. Appendix Item [] Content [] Page number [] [] Appendix Appearance Specification [] [] Date: Jan. 04, 2008 Version: 6.1 1 page Page: 9/11 15. Caution Storage [] [] Store panel under the temperature and humidity range pre-specified. Direct sunlight exposure or piling should be avoided. [/] Unpack Unpack the box with the printed red arrow pointing up. [] [] Handing (1) Use clean sacks or glove to prevent fingerprints and/or stains left on the panel. Extra attention and carefulness should be taken while handling the glass edge. [] [] (2) Avoid touching the viewing area before installation/integration. [] (3) Holding the panel instead of the tail at all time. [ tail ] Cleaning [] (1) Use neutral detergent or isopropyl alcohol on a clean soft cloth to clean the panel surface. [] (2) Prevent using any kind of chemical solvent, acidic or alkali solution. [] Installing (1) Excessive force or strain to the panel or tail is prohibited. [ tail] and Assembling (2) Retain at least 0.3 mm clearance between panel and display module. [] [ 0.3mm ] (3) Gasket or cushion pads around the edge of the panel may segregate water and/or dust contamination. [] Operating [] (1) Touch the panel with your finger or stylus only to assure normal operation. Any sharp edged or hard objects are prohibited. [] (2) Operate the panel in a steady environment. Abrupt variation on temperature and humidity may cause malfunction of the panel. [/ ] Others [] (1) Keep the panel surface clean. Prevent any kind of adhesive applied on the surface. [] (2) Avoid high voltage and/or static charge. [] (3) HIGGSTEC has the right to change the materials and/or specifications. [] Date: Jan. 04, 2008 Version: 6.1 Page: 10/11 Appearance Specification Appendix I Item [] Specification [] Particle Unit: mm (1) D0.25 OK (2) 0.25<D0.4 (each area contains3, total5) OK (3) D>0.4 NG (1) W0.05 OK (2) 0.05<W0.1 and L5.0, total3 OK (3) W>0.1 NG Remark: the particle will be ignored when it is cleanable. (1) W0.025 OK (2) 0.025<W0.05 and L12.0, total5 OK (3) 0.05<W0.1 and L6, total5 OK (4) W>0.1NG [] Linear Object [] Scratch [] Remark[] 1. D=Diameter= 2. W=Width= 3. L=Length= 4. Each area contains=20= 20 Date: Jan. 04, 2008 Version: 6.1 Page: 11/11