PART NUMBER: 223MSR250K METALLIZED POLYESTER EPOXY DIPPED RADIAL LEAD PARTS ARE ROHS COMPLIANT FEATURES Radial lead, self healing metallized polyester ELECTRICAL SPECIFICATIONS Capacitance: 0.022 uF Tolerance: -10 %, +10 % Dissipation Factor: 0.01 Max at 1000 Hz and 25C Temperature Range: -55C to +125C Temperature Coefficient: 400 PPM/C : -200 PPM/C , 200 PPMP'C Above 85C the rated (DC/AC) voltage must be derated at per 1.25% C ESR: 80.381 Ohms at 20C and 1 kHz WVDC; 250 Valts DC Self Inductance: 1 Nanohenries maximum per mm of pitch SVDC: N/A Valts DC dvdt: 110 Vus VAC: 160 Volts AC Terminal to Terminal Dielectric strength: 1.6 times the rated DC Terminal to case Dielectric strength: 2 times the rated DC valtage voltage when applied between the terminals for 2 seconds when applied between the terminals for 2~5 seconds Insulation Resistance (Terminal to Terminal): 30000 Megahms Insulation resistance (Terminal to Case): W/A Megahms MINIMUM MINIMUM after 0 Volts DC is applied for 0 seconds at 0 after 0 Valts DC is applied for 0 seconds at 0 Reliability: 3 failures/billian component hours 3 FIT Load Life: 2000 hours at 85C with 125% of rated voltage Max Capacitance Change: 5% of initially measured value Dissipation Factor Change: =200% of maximum specified value L.R. Change: >50% of minimum specified value PHYSICAL DIMENSIONS Length (L): 10.5 mm, +/- MAX mm Lead Spacing (5): 7.5 mm, +/- 1.5 mm Height (H): 9.5 mm, +/- MAX mm Lead Wire Diameter (d): 0.6 mm, +/- 0.05 mm Thickness (T): 5.5 mm, +- MAX mm Lead Length (LL): 15 mm, +/- MIN mm a 37a? W. Touhy Ave. Lincolnwood, ILG0712 (847-687-1760 FAX (847}873-2850 llinois Capacitor (HK) Lid., Tel 85227930931, Fax: 85227930731, wew.illcap.com.hk ILLINOIS CAPACITOR, INC. 2012 llinois Capacitor