MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For automobile modules and other high temperature applications long life, low impedance and better low temperature characteristics GXE Endurance with ripple current : 2,000 to 5,000 hours at 125 Solvent resistant type except 63 to 450V (see PRECAUTIONS AND GUIDELINES) RoHS Compliant Downsize, Long Life, Downsized, 125 Downsized Higher ripple current GPA SPECIFICATIONS Items Characteristics Category Temperature Range -40 to +125 (10 to 250Vdc ) -25 to +125 (350 to 450Vdc) Rated Voltage Range 10 to 450Vdc Capacitance Tolerance 20% (M) 10 to 100Vdc Leakage Current I=0.03CV or 4A, whichever is greater. (at 20, 120Hz) 160 to 450Vdc CV1,000 I=0.1CV+40 CV>1,000 I=0.04CV+100 (at 20, 1 minute) Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 350 to 450V tan(Max.) 0.24 0.20 0.20 0.16 0.14 0.12 0.10 0.10 0.08 0.08 (at 20, 120Hz) When nominal capacitance exceeds 1,000F, add 0.02 to the above value for each 1,000F increase. Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 350 to 450V Z(-25)/Z(+20) 6 3 2 2 2 2 2 2 2 3 (at 120Hz) Z(-40)/Z(+20) 6 4 4 4 4 4 4 4 6 The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified time at 125. 10 to 100Vdc 160 to 450Vdc Time 8 : 2,000hours 10 : 3,000hours 12.5 &16 : 5,000hours 2,000hours 30% of the initial value Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value 300% of the initial specified value The initial specified value The initial specified value Leakage current The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours (500 hours for 350 to 450Vdc) at 125 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. 10 to 100Vdc 160 to 450Vdc 30% of the initial value 20% of the initial value Capacitance change D.F. (tan) 300% of the initial specified value 200% of the initial specified value Leakage current The initial specified value 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] F0.5 Code : E d Sleeve (PET : Orange) F0.5 Terminal D D' d F D' L' Vent 15min. 4min. (12.5 & 16) (8 & 10) L' 8 0.6 3.5 10 12.5 16 0.6 0.6 0.8 5.0 5.0 7.5 D+0.5max. L+2.0max. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GXE AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7,10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 10V:100,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (1/2) CAT. No. E1001L MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long Life, Downsized, 125 STANDARD RATINGS WV (Vdc) Cap (F) 220 330 470 1,000 2,200 3,300 4,700 100 220 330 470 1,000 2,200 3,300 100 220 330 470 1,000 2,200 100 100 220 330 470 1,000 10 22 33 47 100 220 330 470 1,000 33 47 100 220 330 470 1,000 22 33 10 16 25 35 50 63 80 is not solvent resistant. Rated ripple Impedance current Case size (max/ (mArms/ DxL(mm) 20, 125, 100kHz) Note1) 8x 12 10x 12.5 10x 12.5 10x 20 12.5x 25 16x 25 16x 31.5 8x 12 10x 12.5 10x 12.5 10x 16 12.5x 20 16x 25 16x 31.5 8x 12 10x 12.5 10x 16 10x 20 12.5x 25 16x 31.5 8x 12 10x 12.5 10x 16 10x 20 12.5x 20 16x 25 8x 12 8x 12 8x 12 8x 12 10x 12.5 10x 20 12.5x 20 12.5x 25 16x 31.5 8x 12 10x 12.5 10x 16 12.5x 20 12.5x 25 12.5x 30 16x 31.5 8x 12 10x 12.5 0.32 0.15 0.15 0.075 0.040 0.031 0.025 0.32 0.15 0.15 0.094 0.058 0.031 0.025 0.32 0.15 0.094 0.075 0.040 0.025 0.32 0.15 0.094 0.075 0.058 0.031 0.75 0.50 0.50 0.50 0.20 0.098 0.081 0.059 0.032 1.5 0.59 0.41 0.16 0.12 0.097 0.059 1.5 0.8 340 620 620 950 1,350 1,620 1,860 340 620 620 790 1,080 1,620 1,860 340 620 790 950 1,350 1,860 340 620 790 950 1,080 1,620 180 250 280 280 520 880 990 1,150 1,590 150 530 690 1,050 1,290 1,460 1,850 150 480 WV (Vdc) Part No. EGXE100E221MH12D EGXE100E331MJC5S EGXE100E471MJC5S EGXE100E102MJ20S EGXE100E222MK25S EGXE100E332ML25S EGXE100E472MLN3S EGXE160E101MH12D EGXE160E221MJC5S EGXE160E331MJC5S EGXE160E471MJ16S EGXE160E102MK20S EGXE160E222ML25S EGXE160E332MLN3S EGXE250E101MH12D EGXE250E221MJC5S EGXE250E331MJ16S EGXE250E471MJ20S EGXE250E102MK25S EGXE250E222MLN3S EGXE350E101MH12D EGXE350E101MJC5S EGXE350E221MJ16S EGXE350E331MJ20S EGXE350E471MK20S EGXE350E102ML25S EGXE500E100MH12D EGXE500E220MH12D EGXE500E330MH12D EGXE500E470MH12D EGXE500E101MJC5S EGXE500E221MJ20S EGXE500E331MK20S EGXE500E471MK25S EGXE500E102MLN3S EGXE630E330MH12D EGXE630E470MJC5S EGXE630E101MJ16S EGXE630E221MK20S EGXE630E331MK25S EGXE630E471MK30S EGXE630E102MLN3S EGXE800E220MH12D EGXE800E330MJC5S Cap (F) 47 100 220 330 470 4.7 10 22 33 47 100 220 330 22 33 47 68 100 150 10 22 33 47 68 100 10 22 33 47 68 4.7 10 22 33 47 4.7 10 22 33 47 4.7 10 22 33 80 100 160 200 250 350 400 450 Rated ripple Impedance current Case size (max/ (mArms/ DxL(mm) 20, 125, 100kHz) Note1) 10x12.5 10x20 12.5x25 12.5x30 16x25 8x12 8x12 10x12.5 10x12.5 10x16 12.5x20 16x25 16x31.5 10x20 10x25 12.5x20 12.5x25 16x25 16x31.5 10x20 10x25 12.5x20 12.5x25 16x20 16x25 10x20 12.5x20 12.5x25 16x25 16x31.5 10x20 10x25 12.5x25 16x25 16x31.5 10x20 10x25 12.5x30 16x25 16x31.5 10x25 12.5x20 16x25 16x31.5 0.80 0.39 0.18 0.16 0.11 2.0 1.5 0.80 0.80 0.55 0.25 0.11 0.079 - 480 790 1,240 1,390 1,500 130 150 480 480 630 990 1,500 1,790 115 154 187 245 329 434 78 126 157 204 250 329 78 128 171 225 292 53 85 139 189 243 53 86 142 189 243 58 86 154 203 Part No. EGXE800E470MJC5S EGXE800E101MJ20S EGXE800E221MK25S EGXE800E331MK30S EGXE800E471ML25S EGXE101E4R7MH12D EGXE101E100MH12D EGXE101E220MJC5S EGXE101E330MJC5S EGXE101E470MJ16S EGXE101E101MK20S EGXE101E221ML25S EGXE101E331MLN3S EGXE161E220MJ20S EGXE161E330MJ25S EGXE161E470MK20S EGXE161E680MK25S EGXE161E101ML25S EGXE161E151MLN3S EGXE201E100MJ20S EGXE201E220MJ25S EGXE201E330MK20S EGXE201E470MK25S EGXE201E680ML20S EGXE201E101ML25S EGXE251E100MJ20S EGXE251E220MK20S EGXE251E330MK25S EGXE251E470ML25S EGXE251E680MLN3S EGXE351E4R7MJ20S EGXE351E100MJ25S EGXE351E220MK25S EGXE351E330ML25S EGXE351E470MLN3S EGXE401E4R7MJ20S EGXE401E100MJ25S EGXE401E220MK30S EGXE401E330ML25S EGXE401E470MLN3S EGXE451E4R7MJ25S EGXE451E100MK20S EGXE451E220ML25S EGXE451E330MLN3S : Enter the appropriate lead forming or taping code. (Note1) Ripple current frequency 10 to 100V = 100kHz 160 to 450V = 120Hz RATED RIPPLE CURRENT MULTIPLIERS (10 (160 to 100Vdc) Frequency Multipliers Capacitance (F) Frequency (Hz) 4.7 to 100 220 to 470 1,000 2,200 to 3,300 4,700 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 to 450Vdc) Frequency Multipliers Capacitance (F) Frequency (Hz) 4.7 to 33 47 to 150 50 0.75 0.80 120 1.00 1.00 300 1.25 1.15 1k 1.50 1.30 10k 1.75 1.40 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (2/2) CAT. No. E1001L