FLORA GPS Starter Pack
PRODUCT ID: 1090
DESCRIPTION
Get started with the fabulous Adafruit Flora platform with this lovely starter kit. Included are plenty of parts
to make a few different fun projects! There's a Flora motherboard, a GPS module that can also perform
location datalogging, eight ultra-bright chainable RGB pixels, a battery holder and batteries, two types of
our high quality stainless steel thread, alligator clips to help you test out your parts, a USB cable for
reprogramming the Flora, and some parts to make a wearable remote control (or TV-B-Gone!): NPN
transistors, long range IR LEDs, and matching resistors. Over $120 worth of goodies, for under $100.
FLORA main board
Flora Wearable Ultimate GPS module
Eight Flora RGB NeoPixels V2
3xAAA Battery holder with JST connector and on/off switch
Stainless Thin Conductive Thread - 2 ply - 25 meter/85 ft
Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft
Needle set with 20 pieces
Small Alligator Clip Test Lead (set of 12)
USB cable - A/MiniB - 3ft
4x Alkaline AAA batteries
2x NPN Bipolar Transistors (PN2222)
2x Super-bright 5mm IR LEDs
2x 100-ohm resistors
