150 10/02
Long-life grade capacitors
Applications
■Frequency converters
■Traction
■Highly professional power supplies
Features
■Maximum reliability
■Good thermal characteristics and
high ripple current capability
■Long useful life
■Wide temperature range
■All-welded construction ensures reliable
electrical contact
■Version with optimized construction for base cooling
(2-pad solution) available
■Version with low-inductance design available
Construction
■Charge-discharge proof, polar
■Aluminum case with insulating sleeve
■Poles with screw terminal connections
■Mounting with ring clips, clamps or threaded stud
■The bases of types with threaded stud and
d
≤ 76,9 mm are
not insulated, types with
d
= 91 mm have fully insulated bases
KAL0567-B
B43560 B43580
B43560Capacitors with Screw Terminals
B43580Compact – 105 °C
B43560, B43580
151 10/02
Compact – 105 °C
B43560 / B43580
Specifications and characteristics in brief
Ripple current capability
Due to the ripple current capability of the contact elements, the following current upper limits must
not be exceeded:
Rated voltage
U
R
Surge voltage
U
S
350 … 450 VDC
1,10 ·
U
R (105 °C;
U
R ≤ 400 VDC, 85 °C;
U
R = 450 VDC)
Rated capacitance
C
R
Capacitance tolerance
2 200 … 15 000 µF
± 20 % M
Leakage current
I
L
(5 min, 20 °C)
Self-inductance
ESL d
= 51,6 mm: approx. 15 nH
d
≥ 64,3 mm: approx. 20 nH
Capacitors with low-inductance design:
d
≥ 64,3 mm: approx. 13 nH
Useful life
105 °C;
U
R;
I
~R
85 °C;
U
R;
I
~R
40 °C;
U
R; 2,2 ·
I
~R
> 6 000 h
> 20 000 h
> 250 000 h
Requirements:
∆
C
/
C
≤ ± 30 % of initial value
ESR
≤ 3 times initial specified limit
I
L≤ initial specified limit
Failure percentage: ≤ 1 %
Failure rate: ≤ 20 fit (≤ 20 · 10–9/h)
(for definiton “fit”, refer to chapter
“Quality”
, page 62)
Voltage endurance test
105 °C;
U
R;
I
~R2 000 h
Post test requirements:
∆
C
/
C
≤ ± 10 % of initial value
ESR
≤ 1,3 times initial specified limit
I
L≤ initial specified limit
Vibration resistance To IEC 60068-2-6, test Fc:
displacement amplitude 0,75 mm, frequency range 10 to 55 Hz,
acceleration max. 10
g
, duration 3 × 2 h
IEC climatic category To IEC 60068-1:
40/105/56 (– 40 °C/+ 105 °C/56 days damp heat test)
Detail specifications
Sectional specification
Similar to CECC 30301-803, CECC 30301-807
IEC 60384-4
Capacitor diameter 64,3 mm 76,9 mm 91,0 mm
I
~max 40 A 50 A 70 A
I
L0,3 µA
C
R
µF
-------
U
R
V
-------
⋅
èø
æö
⋅
0,7
≤4µA+
152 10/02
Compact – 105 °C
B43560 / B43580
Dimensional drawings
Type B43560 Type B43580
Ring clip/clamp mounting Threaded stud mounting
Positive pole marking: +
The base of all types with threaded stud and
d
= 91 mm is fully insulated (the lengths
l
and
l
1 are
increased by 0,5 mm in these cases). For types with threaded stud and
d
≤ 76 mm the base is not
insulated. Also refer to the notes on mounting given on page 168.
Dimensions and weights
Dimensions are also valid for 2-pad solution and low-inductance design.
Packing (For ecological reasons the packing is pure cardboard.)
Ter -
minal
Dimensions (mm) with insulating sleeve Approx.
wt. (g)
dI
± 1
I
1 ± 1
I2
+ 0
l
3
d
1
d
2 max
d
3 max
a
+ 0,2
– 1 – 0,4
M 5
M 5
M 5
64,3+ 0/– 0,8
64,3+ 0/– 0,8
64,3+ 0/– 0,8
105,7
130,7
143,2
112,2
137,2
149,7
17
17
17
7,0+ 0,2/– 1
7,0+ 0,2/– 1
7,0+ 0,2/– 1
M 12
M 12
M 12
8,2
8,2
8,2
13,5
13,5
13,5
28,5
28,5
28,5
440
570
640
M 6
M 6
M 6
M 6
M 6
76,9+ 0/– 0,7
76,9+ 0/– 0,7
76,9+ 0/– 0,7
76,9+ 0/– 0,7
76,9+ 0/– 0,7
105,7
130,7
143,2
168,7
220,7
111,5
136,5
149,0
174,5
226,5
17
17
17
17
17
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
M 12
M 12
M 12
M 12
M 12
17,7
17,7
17,7
17,7
17,7
17,7
17,7
17,7
17,7
17,7
31,7
31,7
31,7
31,7
31,7
540
750
840
1000
1300
M 6
M 6
M 6
M 6
91,0+ 0/– 2
91,0+ 0/– 2
91,0+ 0/– 2
91,0+ 0/– 2
144,5
170,0
191,0
221,0
149,8
175,3
196,3
226,3
17
17
17
17
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
M 12
M 12
M 12
M 12
17,7
17,7
17,7
17,7
17,7
17,7
17,7
17,7
31,7
31,7
31,7
31,7
1200
1500
1700
1900
Capacitor diameter
d
Packing units (pieces)
64,3 mm
76,9 mm
91,0 mm
15
12
8
M5: min. reach of screw = 8 mm
M6: min. reach of screw = 12 mm*)
*) 8 mm for low-inductance design
153 10/02
Compact – 105 °C
B43560 / B43580
Special designs
■Low-inductance design
■2-pad solution
Design for optimized connection of the capacitor to the heatsink when using base cooling.
This version is available for capacitors without threaded stud and for diameters ≥64,3 mm
(cf.
I
~R(B) in table “Technical data and ordering codes” and useful life graphs).
Ordering codes:
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
The following must be ordered separately:
Ring clips B 44 030 (cf. page 169)
Clamps for capacitors with
d
≥ 64,3 mm B 44 030 (cf. page 173)
Insulating parts B 44 020 (cf. page 166)
Design Identification in 3rd
block of ordering code
Remark
Low inductance (13 nH) M003 For capacitors with diameter
d
≥ 64,3 mm
2-pad solution M006 For capacitors with diameter
d
≥ 64,3 mm and
without threaded stud
Thread Toothed
washers
Screws/Nuts Maximum
torque
For terminals M 5 A 5,1 DIN 6797 Cylinder-head screw M 5 × 8 DIN 84-4.8 2 Nm
M 6 A 6,4 DIN 6797 Cylinder-head screw M 6 × 12 DIN 85-4.8 2,5 Nm
For mounting M 12 J 12,5 DIN 6797 Hex nut BM 12 DIN 439 10 Nm
Heatsink
Thermopad
thickness
0,2 mm
0,5 mm
KAL0823-3-E
154 10/02
Compact – 105 °C
B43560 / B43580
Overview of available types
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
U
R (VDC) 350 400 450
C
R (µF) Case dimensions
d
×
l
(mm)
2 200 64,3 × 105,7 64,3 × 130,7
2 700 64,3 × 105,7
3 300 64,3 × 130,7 76,9 × 130,7
3 900 76,9 × 105,7
4 700 64,3 × 143,2
76,9 × 105,7 76,9 × 130,7 76,9 × 168,7
91,0 × 144,5
6 000 76,9 × 130,7 76,9 × 220,7
6 800 76,9 × 143,2 91,0 × 144,5 91,0 × 191,0
8 200 91,0 × 144,5 91,0 × 170,0
76,9 × 220,7 91,0 × 221,0
10 000 76,9 × 220,7
12 000 91,0 × 221,0
15 000 91,0 × 221,0
155 10/02
Compact – 105 °C
B43560 / B43580
Technical data and ordering codes
U
R
VDC
C
R
100 H z
20 °C
µF
Case
dimensions
d
×
l
mm
ESR
max
100 Hz
20 °C
mΩ
Z
max
10 kHz
20 °C
mΩ
I
~max
100 Hz
40 °C
A
I
~max
100 Hz
85 °C
A
I
~R
100 Hz
105 °C
A
I
~R(B)
100 Hz
105 °C
A
Ordering code1)2)
350 2 700 64,3 × 105,7 69 55 27 21 8,5 15 B435*0A4278M000
3 900 76,9 × 105,7 48 38 35 27 11 22 B435*0A4398M000
4 700 64,3 × 143,2 40 32 40 31 13 21 B435*0A4478M000
4 700 76,9 × 105,7 40 32 39 30 13 25 B435*0C4478M000
6 000 76,9 × 130,7 31 25 47 36 15 27 B435*0A4608M000
6 800 76,9 × 143,2 27 22 50 40 17 29 B435*0A4688M000
8 200 91,0 × 144,5 23 18 61 48 20 35 B435*0A4828M000
10 000 76,9 × 220,7 19 15 50 50 24 34 B435*0A4109M000
15 000 91,0 × 221,0 12 10 70 70 31 48 B435*0A4159M000
400 2 200 64,3 × 105,7 84 68 24 19 7,8 14 B435*0A9228M000
3 300 64,3 × 130,7 56 45 32 25 10 17 B435*0A9338M000
4 700 76,9 × 130,7 40 32 41 32 13 24 B435*0A9478M000
6 800 91,0 × 144,5 27 22 56 43 18 32 B435*0A9688M000
8 200 91,0 × 170,0 23 18 65 50 21 35 B435*0A9828M000
8 200 76,9 × 220,7 23 18 50 50 22 31 B435*0C9828M000
12 000 91,0 × 221,0 15 12 70 65 27 43 B435*0A9129M000
450 2 200 64,3 × 130,7 84 68 26 20 8,4 14 B435*0A5228M000
3 300 76,9 × 130,7 56 45 35 27 11 20 B435*0A5338M000
4 700 76,9 × 168,7 40 32 45 35 15 24 B435*0A5478M000
4 700 91,0 × 144,5 40 32 46 36 15 27 B435*0C5478M000
6 000 76,9 × 220,7 31 25 50 44 18 27 B435*0A5608M000
6 800 91,0 × 191,0 27 22 61 47 20 32 B435*0A5688M000
8 200 91,0 × 221,0 23 18 70 54 22 35 B435*0A5828M000
1) * “6” = for capacitors with ring clip/clamp mounting
“8” = for capacitors with threaded stud
2) For 2-pad solution (types without threaded stud) and for low-inductance design, see page 153.
156 10/02
Compact – 105 °C
B43560 / B43580
Useful life
depending on ambient temperature
T
A (for natural cooling) and versus temperature of case base
T
B
(for base cooling) under ripple current operating conditions1)
Frequency factor of
permissible ripple current
I
~
versus frequency
f
1,0
0
40
0,5
50 60
500 000 h
250 000 h
A
70 80
150 000 h
50 000 h
90
T
100
20 000 h
B
;
T
110
˚C
6 000 h
2,0
1,5
2,5
3,5 KAL0545-F
B43560/580
R
Ι
R
Ι
~
Ι
~
Ι
~
;
(B)
~
1) The ripple current refers to
I
~R for natural cooling or to
I
~R(B) for base cooling, respectively.
Refer to page 40 for an explanation on how to interpret the useful life graphs.
KAL0688-5
0,6
f
10 1Hz
2
10 3
10 4
1055
0,7
0,8
0,9
1,0
1,1
1,2
1,3
1,5
B43560/580
Ι
100 Hz
f
~
Ι
~
157 10/02
Compact – 105 °C
B43560 / B43580
Frequency characteristics of
ESR
Typical behavior
Impedance
Z
versus frequency
f
Typical behavior at 20 °C
KAL0689-D
0,5
10 1Hz
2
10 3
10 4
1055
0,6
0,7
0,8
0,9
1,0
1,1
1,2
1,3
1,5
f
B43560/580
ESR
100 Hz
ESR
f
KAL0691-P
10 1Hz
3900 µF/350 V
15000 µF/350 V
6000 µF/450 V
2
10 3
10 4
10 5
10 6
10
10 3
_
4
10 2
_
Z
4
10 1
_
4
10 0
10
Ω
1
f
B43560/580
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
(
++49 89 636 09, FAX (0 89) 636-2 26 89
EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne aus-
drückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elek-
troindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe ent-
halten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft ein-
zuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
(
++49 89 636 09, FAX (0 89) 636-2 26 89
EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representa-
tives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
EPCOS:
B43560A9828M000 B43580A9828M000 B43580A4478M000 B43560A4478M000 B43580A5828M000
B43580A4159M000 B43560A4278M000 B43560A5478M B43580C4478M000 B43580A4278M000
B43560A4398M000 B43560A5688M000 B43560A4608M000 B43580A4398M000 B43560A4828M000
B43580A5478M000 B43580A5688M000 B43560A4159M000 B43560A5828M B43560A9129M000
B43580A9129M000 B43580A4608M000 B43580A9478M000 B43560C9828M000 B43580C9828M000
B43580A4828M000 B43560A4109M000 B43580A4109M000
