STG3159 Low voltage 1 max single SPDT switch with break-before-make feature Features High speed: - tPD = 1.5ns (Typ.) at VCC = 3.0V - tPD = 1.5ns (Typ.) at VCC = 2.3V Ultra low power dissipation: - ICC = 0.2A (Max.) at TA = 85C Low "ON" resistance: - RON = 1.0 (TA = 25C) at VCC = 4.3V - RON = 1.1 (TA = 25C) at VCC = 3.0V - RON = 1.7 (TA = 25C) at VCC = 1.8V Wide operating voltage range: - VCC (OPR) = 1.65V to 4.5V single supply 4.5V Tolerant and 1.8V compatible threshold on digital control input at VCC = 2.3V to 3.0V Latch-up performance exceeds 100mA per JESD 78, Class II ESD Performance tested per JESD22 - 2000V Human-body model (A114-B, Class II) - 200V Machine model (A115-A) - 1000V Charged-device model (C101) ) s ( ct u d o r P e t e l o s b O DFN6L Description c u d ) s t( The STG3159 is a high-speed CMOS low voltage single analog S.P.D.T. (Single Pole Dual Throw) switch or 2:1 Multiplexer /Demultiplexer switch fabricated in silicon gate C2MOS technology. It is designed to operate from 1.65V to 4.3V, making this device ideal for portable applications. e t le o r P o s b O - The device offers very low ON-Resistance (1) at VCC = 4.3V. The SEL inputs are provided to control the switch. The switch S1 is ON (they are connected to common Ports Dn) when the SEL input is held high and OFF (high impedance state exists between the two ports) when SEL is held low; the switch S2 is ON (it is connected to common Port D) when the SEL input is held low and OFF (high impedance state exists between the two ports) when SEL is held high. Additional key features are fast switching speed, break-before-make delay time and Ultra Low Power Consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them ESD immunity and transient excess voltage. Order codes Part number Package Packaging STG3159DTR DFN6L (1.2mm x 1mm) Tape and Reel December 2006 Rev 1 1/18 www.st.com 18 Contents STG3159 Contents 1 Pin connections and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.1 DC electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.2 AC electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3.3 Analog switch characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Test circuits ............................................... 9 5 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 c u d e t le ) s ( ct u d o r P e t e l o s b O 2/18 o s b O - o r P ) s t( STG3159 1 Pin connections and functions Pin connections and functions Figure 1. Pin connections (top through view) SEL SEL 11 66 VCC VCC 22 55 GND GND D D 3 4 S1 S1 S2 S2 DFN6L Table 1. Truth table c u d Sel Switch S1 Switch S2 H ON OFF (1) L OFF (1) 1. High impedance Table 2. Pin descriptions Symbol 6, 4 S1, S2 3 D (s) 1 ct 2 5 o r P e du e t le o s b O - Pin N Figure 2. ) s t( o r P ON Name and function Independent channels Common channels SEL Control VCC Positive supply voltage GND Ground (0V) Input equivalent circuit t e l o s b O 3/18 Electrical ratings 2 STG3159 Electrical ratings Stressing the device above the rating listed in the "Absolute Maximum Ratings" table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. Table 3. Absolute maximum ratings Symbol VCC Parameter -0.5 to 5.5 V -0.5 to VCC + 0.5 V -0.5 to 5.5 V Supply voltage DC Input voltage VIC DC Control input voltage VO DC Output voltage IIKC DC Input diode current on control pin (VSEL < 0V) -50 IIK DC Input diode current (VSEL < 0V) 50 IOK DC Output diode current IO DC Output current IOP DC Output current peak (pulse at 1ms, 10% duty cycle) -0.5 to VCC + 0.5 so Tstg Storage temperature (s) Lead temperature (10 sec) ) s t( V mA mA 20 mA 200 mA 400 mA 100 mA 1120 mW -65 to 150 C 300 C Value Unit 1.65 to 4.5 V P e let b O - Power dissipation at TA = 70C (1) c u d ro DC VCC or ground current PD TL t c u Derate above 70C by 18.5mW/C 1. d o r P e Table 4. Recommended operating conditions Symbol t e l o VCC Supply voltage Parameter (1) VI Input voltage 0 to VCC V VIC Control input voltage 0 to 4.5 V VO Output voltage 0 to VCC V Top Operating temperature -55 to 125 C dt/dv Input rise and fall time control input 1. Truth table guaranteed: 1.2V to 4.5V 4/18 Unit VI ICC or IGND s b O Value VCC = 1.65V to 2.7V 0 to 20 VCC = 3.0 to 4.5V 0 to 10 ns/V STG3159 Electrical characteristics 3 Electrical characteristics 3.1 DC electrical characteristics Table 5. DC specifications Test conditions Symbol Value Parameter TA = 25C -40 to 85C -55 to 125C Min. Min. Unit Vcc (V) Min. VIH High level input voltage VIL Low level input voltage RPEAK RON 0.65VCC 0.65VCC 2.3-2.5 1.2 1.2 1.2 2.7-3.0 1.3 1.3 1.3 3.3-3.6 1.4 1.4 1.4 4.3 1.6 1.6 1.6 1.65-1.95 0.40 0.40 2.3-2.5 0.60 0.60 2.7-3.0 0.60 0.60 3.3-3.6 0.60 4.3 0.80 2.7 3.0 2.2 VS = 0V to VCC IS = 100mA O bs t e l o RON (s) RFLAT 1.6 0.80 1.8 1.5 1.7 1.1 1.2 1.4 1.7 2.3 2.7 1.5 1.7 2.7 VS = 1.3V IS = 100mA 1.2 3.0 t c u VS = 1.5V IS = 100mA 1.1 1.2 1.6 4.3 VS = 2.5V IS = 100mA 1.0 1.1 1.3 od 3.0 VS @ RON Max IS = 100mA 4.3 2.7 3.0 4.3 V ) s t( 0.40 od uc 0.60 0.60 V 0.60 0.80 0.06 1.8 2.7 Max. 3.5 VS = 0.9V IS = 100mA 0.05 0.05 0.05 1.8 ON resistance flatness (2) so b O 1.2 e t le 3.0 1.3 Pr 0.60 1.8 r P e ON resistance match between channels (1) Max. 0.65VCC 4.3 Switch On resistance Max. 1.65-1.95 1.8 Switch ON peak resistance Typ. VS = 0V to VCC IS = 100mA 1.0 1.5 1.5 0.45 0.60 0.70 0.40 0.50 0.60 0.37 0.50 0.60 5/18 Electrical characteristics Table 5. STG3159 DC specifications (continued) Test conditions Symbol Value Parameter TA = 25C -40 to 85C -55 to 125C Min. Min. Unit Vcc (V) Min. IOFF OFF state leakage current (SN), (D) IIN Input leakage current ICC Quiescent supply current ICCLV Quiescent supply current low voltage driving Typ. Max. Max. Max. 4.3 VS = 0.3 or 4V 20 100 nA 0 - 4.3 VSEL = 0 to 4.3V 0.1 1 A 1.65 - 4.3 VSEL = VCC or GND 0.05 0.2 4.3 VSEL = 1.65V 17 35 70 4.3 VSEL = 1.80V 15 30 60 4.3 VSEL = 2.60V 5 10 20 uc 2. Flatness is defined as the difference between the maximum and minimum value of ON-resistance as measured over the specified analog signal ranges. ) s ( ct u d o r P e t e l o s b O 6/18 o s b O - A ) s t( d o r P e let 1. RON = RON(Max) - RON(Min) 1 A STG3159 Electrical characteristics 3.2 AC electrical characteristics Table 6. AC Electrical characteristics (CL = 35pF, RL = 50, tr = tf 5ns) Test conditions Symbol Value Parameter TA = 25C -40 to 85C -55 to 125C Unit Vcc (V) Min. 1.65-1.95 tPLH, tPHL Propagation delay Min. Max. Min. Max. 0.14 VS = OPEN 3.6-4.3 ns 0.13 0.13 VS = 0.8V 1.65-1.95 36 2.3-2.7 tON Max. 0.15 2.3-2.7 3.0-3.3 Typ. 22 32 42 16 26 36 13 23 33 VS = 1.5V 3.0-3.3 3.6-4.3 VS = 0.8 1.65-1.95 2.3-2.7 VS = 1.5V 3.0-3.3 3.6-4.3 1.65-1.95 17 27 12 23 11 21 Break before make time delay tD 15 CL = 35pF RL = 50 VS = 1.5V 2.3-2.7 3.0-3.3 3.6-4.3 1.65 Charge injection 3 d o r P e 4.3 e t le o s b O - CL = 100pF VGEN = 0V RGEN = 0 uc 2.3 Q (t s) c u d 29 Turn-OFF time tOFF ) s t( ns Turn-ON time 10 o r P 37 ns 33 31 ns 8 6 16 22 pC 26 33 t e l o s b O 7/18 Electrical characteristics STG3159 3.3 Analog switch characteristics Table 7. Analog switch characteristics (CL = 5pF, RL = 50, TA = 25C) Test conditions Symbol Value Parameter TA = 25C -40 to 85C -55 to 125C Min. Min. Unit Vcc (V) Min. Typ. Max. Max. Max. 1.65-4.3 VS = 1VRMS f = 100kHz -80 dB 1.6-4.3 VS = 1VRMS f = 100kHz -80 dB THD Total harmonic distortion 2.3-4.3 RL = 600 VS = 2VPP f = 20Hz to 20 kHz 0.03 % BW -3dB bandwidth 1.65-4.3 RL= 50 150 CIN Control pin input capacitance CON Sn port capacitance when switch is enabled COFF Sn port capacitance when switch is disabled 3.3 D Port Capacitance when Switch is Enabled 3.3 Off Isolation OIRR (1) Xtalk Crosstalk CD 6 3.3 f = 1MHz f = 1MHz r P e u d o ) s ( ct f = 1MHz s b O 8/18 e t le 52 o s b O 25 50 1. OFF Isolation = 20Log10 (VD/VS), VD = output. VS = input to OFF switch. t e l o c u d ) s t( MHz o r P pF STG3159 Test circuits 4 Test circuits Figure 3. ON-Resistance Figure 5. Figure 4. OFF Leakage Figure 6. Bandwidth c u d Channel to channel crosstalk e t le ) s ( ct Figure 7. ) s t( o r P o s b O - u d o r P e OFF Isolation t e l o s b O 9/18 Test circuits STG3159 Figure 8. Note: Test circuit CL = 5/35pF or equivalent: (includes jig capacitance) RL = 50 or equivalent c u d RT = ZOUT of pulse generator (typically 50) Figure 9. Break-before-make time delay e t le ) s ( ct u d o r P e o s b O - Figure 10. Switching time and charge injection (VGEN = 0V, RGEN = 0, RL = 1M, CL = 100pF) t e l o s b O 10/18 o r P ) s t( STG3159 Test circuits Figure 11. Turn ON, turn OFF delay time c u d e t le ) s ( ct ) s t( o r P o s b O - u d o r P e t e l o s b O 11/18 Package mechanical data 5 STG3159 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com c u d e t le ) s ( ct u d o r P e t e l o s b O 12/18 o s b O - o r P ) s t( STG3159 Package mechanical data Table 8. DFN6 (1.2mm x 1mm) Mechanical data mm. inch Dim. Typ. Min. Max. Typ. Min. Max. A 0.50 0.45 0.55 0.019 0.017 0.021 A1 0.02 0 0.05 0.001 0 0.002 A3 0.127 b 0.20 0.15 0.25 0.007 0.006 0.010 D 1.20 1.10 1.30 0.047 0.043 0.051 E 1 0.90 1.10 0.039 0.035 0.043 e 0.40 L 0.35 0.30 0.40 0.013 0.011 0.015 L1 0.45 0.40 0.50 0.017 0.015 0.019 0.005 0.015 Figure 12. Package dimensions c u d e t le ) s ( ct ) s t( o r P o s b O - u d o r P e t e l o s b O 13/18 Package mechanical data Table 9. STG3159 DFN6 Foot print recommendation c u d e t le ) s ( ct u d o r P e t e l o s b O 14/18 o s b O - o r P ) s t( STG3159 Package mechanical data Table 10. DFN6L Tape information Dim mm. inch D 1.50 +0.1/0 0.059 +0.004/0 E 1.75 0.1 0.069 0.004 Po 4.00 0.1 0.157 0.004 T max. 0.40 0.016 D1 min. 1 0.039 F 3.5 0.05 0.138 0.002 K max. 2.40 0.094 P2 2.00 0.05 0.079 0.002 R 25 0.984 W 8.00 0.30 0.315 0.012 P1 4.00 0.157 Ao, Bo, Ko 0.05 min to 0.50 max. 0.002 min to 0.020 max. Figure 13. DFN6L Tape information e t le ) s ( ct c u d ) s t( o r P o s b O - u d o r P e t e l o s b O 15/18 Package mechanical data Table 11. STG3159 DFN6L Reel information Dim mm. inch Tape size 8.0 0.30 0.315 0.012 A max. 180.0 7.086 B min. 1.5 0.059 C 13.0 0.20 0.512 0.008 D min. 20.2 0.795 N min. 60 2.362 G 8.4 +2/-0 0.319 +0.079/-0 T max. 14.4 0.567 Figure 14. DFN6L Reel information c u d e t le ) s ( ct u d o r P e t e l o s b O 16/18 o s b O - o r P ) s t( STG3159 6 Revision history Revision history Table 12. Revision history Date Revision 06-Dec-2006 1 Changes First release c u d e t le ) s ( ct ) s t( o r P o s b O - u d o r P e t e l o s b O 17/18 STG3159 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. ) s t( Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. c u d No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. e t le o r P UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. o s b O - UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. ) s ( ct u d o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. r P e t e l o ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. bs The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. O (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18