RMKMS (CNM)
www.vishay.com Vishay Sfernice
Revision: 18-Jul-2019 1Document Number: 60004
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Molded, 50 Mil Pitch, Dual-In-Line Thin Film
Resistor Networks
DESIGN SUPPORT TOOLS AVAILABLE
The RMKM series of small outline surface mount style
molded package can accommodate resistor network to your
particular application requirements in compact circuit
integration. The resistor element is a special nickel
chromium film formulation on oxidized silicon.
Utilizing those networks will enable you to take advantage of
parametric performances which will introduce in your
circuitry high thermal and load life stability (0.05 % absolute,
0.02 % ratio, 2000 h at +70 °C at Pn) together with the added
benefits of low noise and rapid rise time.
FEATURES
Tight TCR tracking down to 5 ppm/°C
Monolithic reliability
Low noise < -35 dB
SMD precision networks
SO08, SO14, SO16 cases
MSL 1 to JEDEC J-STD-020C specification
TYPICAL PERFORMANCE
SCHEMATIC
Notes
(1) ± 10 ppm/°C at 0 °C to +70 °C; ± 15 ppm/°C at -55 °C to ± 125 °C
(2) 0.02 % upon request
Actual Size
3
3
3
D
D
D
3
D
3D Models
ABSOLUTE TRACKING
TCR 10 ppm/°C 5 ppm/°C
ABSOLUTE RATIO
TOL. 0.1 % 0.05 %
STANDARD ELECTRICAL SPECIFICATIONS
MODEL SIZE
RESISTANCE
RANGE
Ω
POWER
RATING PER
RESISTOR
W
POWER
RATING PER
PACKAGE
P70 °C
W
ABSOLUTE
TOLERANCE
± %
RATIO
TOLERANCE (2)
± %
ABSOLUTE
TCR (1)
± ppm/°C
RATIO
TCR
± ppm/°C
RMKMS SO08 500 to 200K 0.050 0.250 0.1, 0.5, 1 0.05, 0.1, 0.5 10, 15 5
RMKMS SO14 500 to 200K 0.050 0.500 0.1, 0.5, 1 0.05, 0.1, 0.5 10, 15 5
RMKMS SO16 500 to 200K 0.050 0.500 0.1, 0.5, 1 0.05, 0.1, 0.5 10, 15 5
PERFORMANCES
TEST SPECIFICATIONS CONDITION
Stability: ΔR Absolute 0.05 % 2000 h at +70 °C at P
Stability: ΔR Ratio 0.02 % 2000 h at +70 °C at P
Voltage coefficient < 0.1 ppm/V
Working voltage 50 VDC maximum
Operating temperature range -55 °C to +125 °C
Storage temperature range -55 °C to +155 °C
Noise -35 dB (typical) MIL-STD-202, meth. 308
Thermal EMF 0.1 μV/°C
High temp. storage Shelf life stability 0.075 % 2000 h at +125 °C
0.025 % 2000 h at +125 °C
For other configurations, please consult factory.
Case SO08
RMKM S408
4
3
2
1
5
6
7
8
R4
R3
R2
R1
5
6
7
8
4
3
2
1
R5
R4 R3
R2 R1
RMKM S508
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
R8
R7
R6
R5
R4
R3
R2
R1
RMKM S816
Case SO16
8
9
10
11
12
13
14
7
6
5
4
3
2
1
R9
R8 R7
R6 R5
R4 R3
R2 R1
RMKM S914
8
9
10
11
12
13
14
7
6
5
4
3
2
1
R7
R6
R5
R4
R3
R2
R1
RMKM S714
Case SO14
RMKMS (CNM)
www.vishay.com Vishay Sfernice
Revision: 18-Jul-2019 2Document Number: 60004
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS AND IMPRINTING
DERATING CURVE
Note
For more information see “Codification of Packaging” table
Imprinting:
VISHAY logo, series, ohmic value,
tolerance, manufacturing date
A
B
E
C
D
J
I
F
H
G
DIMENSION INCHES MILLIMETERS
A Pitch 0.05 Pitch 1.27
B 0.230/0.244 5.84/6.2
C (SO08) 0.189/0.196 4.80/4.98
C (SO14) 0.337/0.344 8.56/8.74
C (SO16) 0.386/0.393 9.80/9.98
D 0.014/0.020 0.35/0.51
E 0.150/0.157 3.81/3.99
F 0.007/0.010 0.17/0.254
G, H 0.016/0.035 0.40/0.89
I 0.004/0.010 0.10/0.254
J 0.061/0.068 1.55/1.73
MECHANICAL SPECIFICATIONS
Mechanical protection Epoxy molded assembly
Terminal leads 100 % tin
Resistive element Passivated nichrome
Unit weight: Case SO08 0.070 g
Cases SO14, SO16 0.146 g
MARKING
TOLERANCE CODING
ABDF X
0.1 % 0.1 % 0.5 % 1 % 0.1 %
0.05 % 0.1 % 0.1 % 0.5 % 0.02 % (on request only)
07020 40 60 80 100 125
0
0.1
0.2
0.3
0.4
0.5
Temperature in °C
Rated Power in W
110
0.25 Case SO08
Case SO14 and SO16
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RMKMS408-10KFDT99 (preferred part number format)
GLOBAL MODEL VALUE ABS. TOLERANCE RATIO TOLERANCE PACKAGING OPTION
RMKMS408
RMKMS508
RMKMS816
RMKMS714
RMKMS914
Decimal:
R or K
B = 0.1 %
D = 0.5 %
F = 1.0 %
D = 0.5 %
B = 0.1 %
W = 0.05 %
P = 0.02 %
Blank = tube
T (1) = tape
Leave blank
if no option
Custom Design: CNM 1138
CNM 1138
GLOBAL MODEL REFERENCE
RMKMS 408 10K 1 % abs 0.5 % ratio T R0099
HISTORICAL MODEL VALUE ABS. TOLERANCE AND
RATIO TOLERANCE PACKAGING OPTION
Blank = tube
T (1) = tape
Leave blank
if no option
MS 4 0 810KFKD9MR T 9-
RMKMS (CNM)
www.vishay.com Vishay Sfernice
Revision: 18-Jul-2019 3Document Number: 60004
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HISTORICAL PART NUMBER EXAMPLES
RMKMS816-10KBWT250 (tapes of 250 pieces)
RMKMS816-1KDBT250 (tapes of 250 pieces)
CNM1138T250 (tapes of 250 pieces)
CNM1490T250 (tapes of 250 pieces)
Historical part numbers are not recommended, but can still be used for ordering.
CODIFICATION OF PACKAGING
CODE 18 PACKAGING
PLASTIC TAPE (in standard for all sizes)
T100 min., 1 mult
TA 100 min., 100 mult
TB 250 min., 250 mult
TC 500 min., 500 mult
TD 1000 min., 1000 mult
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED