BAS3010A... Medium Power AF Schottky Diode * Forward current: 1 A * Reverse voltage: 30 V * Very low forward voltage (typ. 0.41V @ I F = 1A) * For high efficiency DC/DC conversion, fast switching, protection and clamping applications * Pb-free (RoHS compliant) package 1) * Qualified according AEC Q101 BAS 3010A-03W Type BAS3010A-03W Package SOD323 Configuration single Marking 4/ blue Maximum Ratings at TA = 25C, unless otherwise specified Parameter Symbol Diode reverse voltage2) VR 30 V Forward current 2) IF 1 A Average rectified forward current (50/60Hz, sinus) I FAV Repetitive peak forward current I FRM Value Unit 1 3.5 (tp 1 ms, D 0.5) Non-repetitive peak surge forward current I FSM 10 Junction temperature Tj 150 Operating temperature range T op -65 ... 125 Storage temperature T stg -65 ... 150 (t 10ms) C 1Pb-containing 2For package may be available upon special request TA > 25C the derating of VR and IF has to be considered. Please refer to the attached curves. 1 2007-04-10 BAS3010A... Thermal Resistance Parameter Symbol Junction - soldering point 1) RthJS Value Unit 82 K/W Electrical Characteristics at TA = 25C, unless otherwise specified Parameter Symbol Values min. typ. max. DC Characteristics Reverse current2) IR VR = 5 V - 5 25 VR = 10 V - 10 50 VR = 30 V - 40 200 Forward voltage2) Unit A mV VF IF = 1 mA - 170 220 IF = 10 mA - 220 270 IF = 100 mA - 290 340 IF = 500 mA - 350 410 IF = 1 A - 410 470 - 28 35 AC Characteristics Diode capacitance CT pF VR = 5 V, f = 1 MHz 1For calculation of RthJA please refer to Application Note Thermal Resistance 2Pulsed test: tp = 300 s; D = 0.01 2 2007-04-10 BAS3010A... Diode capacitance CT = (VR) f = 1MHz Reverse current IR = (TA) VR = Parameter 10 -2 120 A pF 30 V 20 V 10 V 5V 80 IR CT 10 -3 10 -4 60 10 -5 40 10 -6 20 0 0 5 10 15 20 V 10 -7 0 30 25 50 75 C 100 VR Reverse current IR = (VR) Forward Voltage VF = (TA) IF = Parameter TA = Parameter 10 -2 0.5 A V TA= 125C 10 -3 IF= 1 A 500 mA 100 mA 10 mA 0.4 TA= 85C 0.35 10 -4 VF IR 150 TA 0.3 0.25 10 -5 TA= 25C 0.2 0.15 10 -6 0.1 0.05 10 -7 0 5 10 15 20 V 0 -50 30 VR -25 0 25 50 75 100 C 150 TA 3 2007-04-10 BAS3010A... Forward current IF = (VF) Permissible Reverse voltage VR = (TA) TA = Parameter tp = Parameter, Duty cycle < 0.01 Device mounted on PCB with Rth = 160 k/W 0 10 35 A V tp=300s IF V Rmax 10 -1 10 20 125 C 85 C 25 C -40 C -2 25 tp=100ms 15 DC 10 10 -3 5 10 -4 0 0.1 0.2 0.3 0.4 V 0 0 0.6 VF 25 50 75 100 C 150 TA Forward current IF = (T S) 1200 mA IF 800 600 400 200 0 0 15 30 45 60 75 90 105 120 C 150 TS 4 2007-04-10 Package SOD323 BAS3010A... Package Outline 0.9 +0.2 -0.1 +0.2 1.25 -0.1 0 0.05 A 1.7 +0.2 -0.1 Cathode marking 0.45 0.15 2.5 0.2 2 1 0.3 +0.1 -0.05 +0.05 0.3 -0.2 0.15 +0.1 -0.06 0.25 M A 0.8 1.7 0.8 Foot Print 0.6 Marking Layout (Example) BAR63-03W Type code Cathode marking Laser marking Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel 0.2 2 2.9 8 4 Cathode marking 0.65 1.35 5 1 2007-04-10 BAS3010A... Edition 2006-02-01 Published by Infineon Technologies AG 81726 Munchen, Germany (c) Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 6 2007-04-10