PART NO.
ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Jagan 11/2/08 11/2/08 26/2/08Suresh G. C
RELEASED
MCS2S Series
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008.
TOLERANCES: DRAWN BY:
Jagan
Suresh
G.Cook
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE:
Slide Switches - Double Side Recoil
S2S-V(NEW)_DWG
M10000821
11/02/08
DATE: SIZE
SCALE: NTS U.O.M.: mm (Inches) SHEET: 1 OF 4
DWG NO. ELECTRONIC FILE REV
A
11/02/08 A
DATE:
26/02/08
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Dimensions : Millimetres (Inches)
Circuit Diagram
PCB Layout
MCS2S-AF
PART NO.
ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Jagan 11/2/08 11/2/08 26/2/08Suresh G. C
RELEASED
MCS2S Series
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008.
TOLERANCES: DRAWN BY:
Jagan
Suresh
G.Cook
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE:
Slide Switches - Double Side Recoil
S2S-V(NEW)_DWG
M10000821
11/02/08
DATE: SIZE
SCALE: NTS U.O.M.: mm (Inches) SHEET: 2 OF 4
DWG NO. ELECTRONIC FILE REV
A
11/02/08 A
DATE:
26/02/08
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Dimensions : Millimetres (Inches)
Circuit Diagram
PCB Layout
MCS2S-BF
PART NO.
ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Jagan 11/2/08 11/2/08 26/2/08Suresh G. C
RELEASED
MCS2S Series
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008.
TOLERANCES: DRAWN BY:
Jagan
Suresh
G.Cook
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE:
Slide Switches - Double Side Recoil
S2S-V(NEW)_DWG
M10000821
11/02/08
DATE: SIZE
SCALE: NTS U.O.M.: mm (Inches) SHEET: 3 OF 4
DWG NO. ELECTRONIC FILE REV
A
11/02/08 A
DATE:
26/02/08
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Specifications:
Mechanical:
Operating force : 100 ±50gf.
Travel : 1.50 ±0.2mm.
Operating temperature range : -30 to +80°C.
Storage temperature range : -40 to +90°C.
Electrical:
Electrical life : 50,000 cycles.
Non-switching rating : 0.2mA, 5V dc.
Switching rating : 300mA, 4V dc.
Maximum contact resistance : 70mΩ.
Minimum insulation resistance : 100MΩ at 250V dc.
Dielectric strength : 100V ac/1 minute.
Circuit : 1P2T, 1P3T
Materials:
Cover : Nickel silver.
Contact disc : Alloy copper, with gold cladding.
Terminal : Phosphor bronze, with silver cladding.
Base : UL 94V-0 Nylon high temperature thermoplastic.
Colour : Black (1P2T), Brown (1P3T).
Stem : UL 94V-0 Nylon high temperature thermoplastic.
Color : Black
Soldering Process:
Hand Soldering : Use a soldering iron of 30 watts, controlled at 350°C approximately
5 seconds while Applying solder.
Reflow Soldering : When applying reflow soldering, the peak temperature of the
reflow oven should be set to 260°C maximum.
Temperature Profile
PART NO.
ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Jagan 11/2/08 11/2/08 26/2/08Suresh G. C
RELEASED
MCS2S Series
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008.
TOLERANCES: DRAWN BY:
Jagan
Suresh
G.Cook
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE:
Slide Switches - Double Side Recoil
S2S-V(NEW)_DWG
M10000821
11/02/08
DATE: SIZE
SCALE: NTS U.O.M.: mm (Inches) SHEET: 4 OF 4
DWG NO. ELECTRONIC FILE REV
A
11/02/08 A
DATE:
26/02/08
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Specifications Table
LPart Number
1.50 (0.0591)
MCS2S-A15F
MCS2S-B15F
Dimensions : Millimetres (Inches)
Part Number Explanation
S
Slide Switch
MC 15
Stem
Height
-
Poles - Positions : A = 1P2T.
B = 1P3T.
Stem Height : 15 = 1.5mm.
Terminal Type : F = Flat.
Type
2S
Double
Side Recoil
A
Poles -
Positions
F
Terminal
Type
