MIXERS - DBL-BAL - SMT
9
9 - 20
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC141LH5
GaAs MMIC SMT DOUBLE-
BALANCED MIXER, 7 - 14 GHz
v00.0705
General Description
Features
Functional Diagram
Input IP3: +20 dBm
LO to RF Isolation: 35 dB
Hermetic SMT Package, 25 mm2
Screening to MIL-PRF-38535 (Class B or S) Available
Electrical Speci cations, TA = +25° C, LO Drive = +15 dBm*
Typical Applications
The HMC141LH5 is ideal for:
• Telecom Infrastructure
• Military Radio, Radar & ECM
• Space Systems
• Test Instrumentation
The HMC141LH5 is a miniature passive double-
balanced mixer housed in a hermetic SMT leadless
package that can be used as an upconverter or
downconverter. The device is a passive diode/balun
type mixer with high dynamic range. The mixer can
handle larger signal levels than most active mixers
due to the high third order intercept of 20 dBm. MMIC
implementation provides exceptional balance in the
circuit resulting in high LO/RF and LO/IF isolations
and unit-to-unit consistency. The HMC141LH5 allows
the use of surface mount manufacturing techniques
and is suitable for high reliability military, industrial
and space applications.
Parameter Min. Typ. Max. Min. Typ. Max. Units
Frequency Range, RF & LO 7 - 12 12 - 14 GHz
Frequency Range, IF DC - 2 DC - 2 GHz
Conversion Loss 10 12 11 13 dB
Noise Figure (SSB) 10 12 11 13 dB
LO to RF Isolation 28 35 28 35 dB
LO to IF Isolation 26 34 26 31 dB
IP3 (Input) 20 23 dBm
IP2 (Input) 35 40 dBm
1 dB Gain Compression (Input) 15 15 dBm
*Unless otherwise noted, all measurements performed as downconverter, IF = 1 GHz
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
MIXERS - DBL-BAL - SMT
9
9 - 21
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC141LH5
GaAs MMIC SMT DOUBLE-
BALANCED MIXER, 7 - 14 GHz
v00.0705
Conversion Gain vs.
Temperature @ LO = +15 dBm Isolation @ LO = +15 dBm
IF Bandwidth @ LO = +15 dBm
Return Loss @ LO = +15 dBmConversion Gain vs. LO Drive
Upconverter Performance
Conversion Gain @ LO = +15 dBm
-20
-16
-12
-8
-4
0
6 8 10 12 14 16
+25C
+85C
-40C
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-20
-16
-12
-8
-4
0
0 0.5 1 1.5 2 2.5 3
IF Conversion Gain
IF Return Loss
RESPONSE (dB)
FREQUENCY (GHz)
-20
-16
-12
-8
-4
0
6 8 10 12 14 16
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-20
-16
-12
-8
-4
0
6 8 10 12 14 16
LO = +13 dBm
LO = +15 dBm
LO = +17 dBm
LO = +20 dBm
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-50
-40
-30
-20
-10
0
6 8 10 12 14 16
ISOLATION (dB)
FREQUENCY (GHz)
RF to IF
LO to RF
LO to IF
-25
-20
-15
-10
-5
0
6 8 10 12 14 16
RF
LO
RETURN LOSS (dB)
FREQUENCY (GHz)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
MIXERS - DBL-BAL - SMT
9
9 - 22
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC141LH5
GaAs MMIC SMT DOUBLE-
BALANCED MIXER, 7 - 14 GHz
v00.0705
Input IP3 vs. LO Drive*
Input P1dB vs.
Temperature @ LO = +15 dBm
Input IP3 vs.
Temperature @ LO = +15 dBm*
Harmonics of LO
* Two-tone input power = 0 dBm each tone, 1 MHz spacing.
Input IP2 vs. LO Drive*
MxN Spurious @ IF Port
nLO
mRF01234
0XX-1 6 930
1 6 0 20 40 37
2 6863555379
3 9495877690
4 88 100 96 99 104
RF = 10 GHz @ -10 dBm
LO = 8.9 GHz @ 20 dBm
All values in dBc relative to the IF power level.
Measured as downconverter.
nLO Spur @ RF Port
LO Freq. (GHz) 1 2 3 4
644406153
846325952
10 38 25 52 59
12 39 32 55 64
14 43 34 54 N/A
16 39 34 53 N/A
LO = +20 dBm
All values in dBc below input LO level @ RF port.
0
5
10
15
20
25
6 8 10 12 14 16
+25C
+85C
-40C
P1dB (dBm)
RF FREQUENCY (GHz)
0
10
20
30
40
50
60
70
6 8 10 12 14 16
LO = +13 dBm
LO = +15 dBm
LO = +17 dBm
LO = +20 dBm
INPUT IP2 (dBm)
RF FREQUENCY (GHz)
0
5
10
15
20
25
30
35
6 8 10 12 14 16
+25C
+85C
-40C
IP3 (dBm)
RF FREQUENCY (GHz)
0
5
10
15
20
25
30
35
6 8 10 12 14 16
LO = +13 dBm
LO = +15 dBm
LO = +17 dBm
LO = +20 dBm
IP3 (dBm)
RF FREQUENCY (GHz)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
MIXERS - DBL-BAL - SMT
9
9 - 23
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC141LH5
GaAs MMIC SMT DOUBLE-
BALANCED MIXER, 7 - 14 GHz
v00.0705
Outline Drawing
Absolute Maximum Ratings
RF / IF Input +13 dBm
LO Drive +27 dBm
IF DC Current ±2 mA
Channel Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 9.83 mW/°C above 85 °C) 640 mW
Thermal Resistance (RTH)
(Channel to package bottom) 101.7 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
NOTES:
1. PACKAGE BODY MATERIAL: CERAMIC & KOVAR
2. LEAD AND GROUND PADDLE PLATING: GOLD 40-80 MICROINCHES
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PAD BURR LENGTH 0.15mm MAX. PAD BURR HEIGHT 0.25mm MAX
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
MIXERS - DBL-BAL - SMT
9
9 - 24
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC141LH5
GaAs MMIC SMT DOUBLE-
BALANCED MIXER, 7 - 14 GHz
v00.0705
Pin Number Function Description Interface Schematic
1, 3, 4, 6, 7
9 - 12 GND These pins and package base must be
connected to RF/DC ground.
2RF
This pin is AC coupled and matched to 50 Ohms from
7 - 14 GHz
5IF
This pin is DC coupled. For applications not requiring operation
to DC, this port should be DC blocked externally using a series
capacitor whose value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pin must not source/
sink more than 2 mA of current or die non-function and possible
die failure will result.
8LO
This pin is AC coupled and matched to 50 Ohms from
7 - 14 GHz
Pin Descriptions
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
MIXERS - DBL-BAL - SMT
9
9 - 25
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC141LH5
GaAs MMIC SMT DOUBLE-
BALANCED MIXER, 7 - 14 GHz
v00.0705
Evaluation PCB
The circuit board used in the nal application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and package base should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
List of Materials for Evaluation PCB 111552 [1]
Item Description
J1 - J3 PCB Mount SMA RF Connector, SRI
U1 HMC141LH5
PCB [2] 111550 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
