856908 836.5/881.5 MHz SAW Duplexer Applications General purpose wireless Femtocells Repeaters Data cards and dongles Product Features Functional Block Diagram Top view Usable bandwidth 25 MHz No matching required for operation at 50 Excellent rejection for Bluetooth and GPS operation Suitable for Automotive applications - Compliant to the AEC-Q200 reliability standard. Manufacturing facilities are certified with ISO/TS 16949:2002 High Isolation High Rejection Ceramic Surface Mount Package (SMP) Small Size : 3.8 x 3.8 x 1.47 mm Pb Hermetic RoHS compliant, Pb-free Gnd Ant Gnd 9 8 7 Gnd 10 6 Gnd Uplink 11 5 Downlink Gnd 12 4 Gnd 1 2 3 Gnd Gnd Gnd General Description Pin Configuration 856908 is a Band V duplexer in a compact size for use in Femtocells, coverage enhancement repeaters, data cards, and other wireless data applications. Designed for rejection of unwanted Bluetooth and GPS signals, this SAW duplexer also has excellent power handling capability for low power transmitters. Pin # SE Description 5 8 11 1,2,3,4,6 7,9,10,12 Downlink Antenna Uplink Case Ground Case Ground Housed in a 3.8 x 3.8 mm hermetic package, this device allows for a compact and cost effective duplexer solution for Band V applications. No matching components are required, making the PCB design and implementation easy. Ordering Information Part No. Description 856908 856908-EVB packaged part evaluation board Standard T/R size =4000 units/reel. Data Sheet: Rev H 10/25/12 (c) 2012 TriQuint Semiconductor, Inc. - 1 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856908 836.5/881.5 MHz SAW Duplexer Specifications Electrical Specifications (1) Specified Temperature Range: (2) -30 to +85 C Uplink Specifications Conditions Min Parameter (3) Center Frequency Maximum Insertion Loss Amplitude Ripple Absolute Attenuation 42.5 38 35 27 15 9.5 Return Loss at Uplink Terminal (5) Input Power (6) 824 - 849 MHz 824 - 849 MHz 869 - 894 MHz 1574 - 1577 MHz 1648 - 1698 MHz 1850 - 2170 MHz 2472 - 2547 MHz 824 - 849 MHz 824 - 849 MHz Parameter (3) Downlink Specifications Conditions Min Center Frequency Maximum Insertion Loss Amplitude Ripple Absolute Attenuation 869 - 894 MHz 869 - 894 MHz 824 - 849 MHz 1570 - 1580 MHz 1850 - 2170 MHz 2400 - 2484 MHz 869 - 894 MHz 869 - 894 MHz Return Loss at Downlink Terminal (5) Input Power (6) Parameter (3) 50 40 33 15 9.5 Uplink-Downlink Specifications Conditions Min Uplink-Downlink Isolation 824 - 849 MHz 849 - 869 MHz 869 - 894 MHz Source/Load Impedance (single-ended) (7) 50 34 45 - Typical (4) Max 836.5 2.0 0.25 44.7 42.4 45 35.7 22.6 12 2.5 1.0 +27 Typical (4) Max 881.5 2.5 0.4 55.3 56.0 41.0 23.4 10.8 3.5 2.2 +24 Typical (4) Max Units 56.9 38.4 46.4 50 - dB dB dB Units MHz dB dB p-p dB dB dB dB dB dB dBm Units MHz dB dB p-p dB dB dB dB dB dBm Notes: 1. All specifications are based on the TriQuint schematics for the reference designs shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature on pcb 5. Excluding losses due to PCB 6. CW signal at 55C for 10,000 hours 7. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Operable Temperature Storage Temperature Rating -40 to +85 oC -40 to +85 oC Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev H 10/25/12 (c) 2012 TriQuint Semiconductor, Inc. - 2 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856908 836.5/881.5 MHz SAW Duplexer Specifications Electrical Specifications (1) Specified Temperature Range: (2) -40 to +85 C Uplink Specifications Conditions Min Parameter (3) Center Frequency Maximum Insertion Loss Amplitude Ripple Absolute Attenuation 42.5 37.5 35 27 15 9.3 Return Loss at Uplink Terminal (5) Input Power (6) 824 - 849 MHz 824 - 849 MHz 869 - 894 MHz 1574 - 1577 MHz 1648 - 1698 MHz 1850 - 2170 MHz 2472 - 2547 MHz 824 - 849 MHz 824 - 849 MHz Parameter (3) Downlink Specifications Conditions Min Center Frequency Maximum Insertion Loss Amplitude Ripple Absolute Attenuation 869 - 894 MHz 869 - 894 MHz 824 - 849 MHz 1570 - 1580 MHz 1850 - 2170 MHz 2400 - 2484 MHz 869 - 894 MHz 869 - 894 MHz Return Loss at Downlink Terminal (5) Input Power (6) Parameter (3) 50 40 33 15 9.5 Uplink-Downlink Specifications Conditions Min Uplink-Downlink Isolation 824 - 849 MHz 849 - 869 MHz 869 - 894 MHz Source/Load Impedance (single-ended) (7) 50 34 45 - Typical (4) Max 836.5 2.0 0.25 44.7 42.4 45 35.7 22.6 12 2.9 1.0 +27 Typical (4) Max 881.5 2.5 0.4 55.3 56.0 41.0 23.4 10.8 3.9 2.2 +24 Typical (4) Max Units 56.9 38.4 46.4 50 - dB dB dB Units MHz dB dB p-p dB dB dB dB dB dB dBm Units MHz dB dB p-p dB dB dB dB dB dBm Notes: 1. All specifications are based on the TriQuint schematics for the reference designs shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature on pcb 5. Excluding losses due to PCB 6. CW signal at 55C for 10,000 hours 7. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Operable Temperature Storage Temperature Rating -40 to +85 oC -40 to +85 oC Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev H 10/25/12 (c) 2012 TriQuint Semiconductor, Inc. - 3 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856908 836.5/881.5 MHz SAW Duplexer Reference Design - 50 SE Input, 50 SE Output Schematic 8 ANT Uplink 50 Single-ended Input 1,2,3,4,6 7,9,10,12 8 ANT 50 Single-ended Output 5 50 Downlink 50 Single-ended Input 11 50 50 50 11 5 50 Single-ended Output 50 1,2,3,4,6 7,9,10,12 50 Notes: 1. No impedance matching required 2. Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration 1.11 960880 0.65 JJJYM 0.14 GD 4.01 0.15x45 CHAMFER 0.80 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick 1.60 Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number SMA PCB N/A N/A SMA connector 3-layer Radiall USA Inc. multiple 9602-1111-018 960880 Data Sheet: Rev H 10/25/12 (c) 2012 TriQuint Semiconductor, Inc. - 4 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856908 836.5/881.5 MHz SAW Duplexer Typical Performance (at room temperature) Data Sheet: Rev H 10/25/12 (c) 2012 TriQuint Semiconductor, Inc. - 5 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856908 836.5/881.5 MHz SAW Duplexer Data Sheet: Rev H 10/25/12 (c) 2012 TriQuint Semiconductor, Inc. - 6 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856908 836.5/881.5 MHz SAW Duplexer Mechanical Information Package Information, Dimensions and Marking Package Style: SMP-15N Dimensions: 3.8 x 3.8 x 1.42 mm Marking code TriQuint logo GD Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating Date Code ID dot JJJYM All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 1.42 NOM. 1.65 MAX. 0.86 The date code consists of: day of the current year (Julian, 3 digits), Y = last digit of the year, and M = manufacturing site code 3.80 1.60 0.80 0.90 0.60 3.80 0.45 0.15x45 CHAMFER Tape and Reel Information Standard T/R size = 4000 units/reel. All dimensions are in millimeters TriQuint logo 12.8 2.7 O330 ID dot 4.0 0.3 2.0 O1.5 A 1.75 5.5 O102 4.1 O20.2 O13.0 2.0 Data Sheet: Rev H 10/25/12 (c) 2012 TriQuint Semiconductor, Inc. 12.0 Direction of travel 1.8 Section A-A - 7 of 8 - 4.1 8.0 O1.5 A Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856908 836.5/881.5 MHz SAW Duplexer Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 1A Value: Passes 300 V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free ESD Rating: B Value: Passes 200 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev H 10/25/12 (c) 2012 TriQuint Semiconductor, Inc. - 8 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)