856908 - TriQuint Semiconductor

856908

836.5/881.5 MHz SAW Duplexer

Data Sheet: Rev H 10/25/12

- 1 of 8 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Applications

General purpose wireless

Femtocells

Repeaters

Data cards and dongles

Product Features

Functional Block Diagram

Top view

Usable bandwidth 25 MHz

No matching required for operation at 50Ω

Excellent rejection for Bluetooth and GPS operation

Suitable for Automotive applications - Compliant to

the AEC-Q200 reliability standard. Manufacturing

facilities are certified with ISO/TS 16949:2002

High Isolation

High Rejection

Ceramic Surface Mount Package (SMP)

Small Size : 3.8 x 3.8 x 1.47 mm

Hermetic RoHS compliant, Pb-free

Downlink

Uplink

Ant

5

4

6

13

2

7

8

9

10

11

12

Gnd

General Description

Pin Configuration

856908 is a Band V duplexer in a compact size for use in

Femtocells, coverage enhancement repeaters, data cards,

and other wireless data applications. Designed for

rejection of unwanted Bluetooth and GPS signals, this

SAW duplexer also has excellent power handling

capability for low power transmitters.

Housed in a 3.8 x 3.8 mm hermetic package, this device

allows for a compact and cost effective duplexer solution

for Band V applications.

No matching components are required, making the PCB

design and implementation easy.

Pin # SE

Description

5

Downlink

8

Antenna

11

Uplink

1,2,3,4,6

Case Ground

7,9,10,12

Case Ground

Ordering Information

Part No.

Description

856908

packaged part

856908-EVB

evaluation board

Standard T/R size =4000 units/reel.

Pb

856908

836.5/881.5 MHz SAW Duplexer

Data Sheet: Rev H 10/25/12

- 2 of 8 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Specifications

Electrical Specifications (1)

Specified Temperature Range: (2) -30 to +85 ºC

Uplink Specifications

Parameter (3)

Conditions

Min

Typical (4)

Max

Units

Center Frequency

-

836.5

-

MHz

Maximum Insertion Loss

824 – 849 MHz

-

2.0

2.5

dB

Amplitude Ripple

824 – 849 MHz

-

0.25

1.0

dB p-p

Absolute Attenuation

869 – 894 MHz

1574 – 1577 MHz

1648 – 1698 MHz

1850 – 2170 MHz

2472 – 2547 MHz

42.5

38

35

27

15

44.7

42.4

45

35.7

22.6

-

dB

Return Loss at Uplink Terminal (5)

824 – 849 MHz

9.5

12

-

dB

Input Power (6)

824 – 849 MHz

+27

dBm

Downlink Specifications

Parameter (3)

Conditions

Min

Typical (4)

Max

Units

Center Frequency

-

881.5

-

MHz

Maximum Insertion Loss

869 – 894 MHz

-

2.5

3.5

dB

Amplitude Ripple

869 – 894 MHz

-

0.4

2.2

dB p-p

Absolute Attenuation

824 – 849 MHz

1570 – 1580 MHz

1850 – 2170 MHz

2400 – 2484 MHz

50

40

33

15

55.3

56.0

41.0

23.4

-

dB

Return Loss at Downlink Terminal (5)

869 – 894 MHz

9.5

10.8

-

dB

Input Power (6)

869 – 894 MHz

+24

dBm

Uplink-Downlink Specifications

Parameter (3)

Conditions

Min

Typical (4)

Max

Units

Uplink-Downlink Isolation

824 – 849 MHz

849 – 869 MHz

869 – 894 MHz

50

34

45

56.9

38.4

46.4

-

dB

Source/Load Impedance (single-ended) (7)

-

50

-

Notes:

1. All specifications are based on the TriQuint schematics for the reference designs shown on page 4

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over

temperature

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances

4. Typical values are based on average measurements at room temperature on pcb

5. Excluding losses due to PCB

6. CW signal at 55°C for 10,000 hours

7. This is the optimum impedance in order to achieve the performance shown

Absolute Maximum Ratings

Parameter

Rating

Operable Temperature

-40 to +85 oC

Storage Temperature

-40 to +85 oC

Operation of this device outside the parameter ranges given above may cause permanent damage.

856908

836.5/881.5 MHz SAW Duplexer

Data Sheet: Rev H 10/25/12

- 3 of 8 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Specifications

Electrical Specifications (1)

Specified Temperature Range: (2) -40 to +85 ºC

Uplink Specifications

Parameter (3)

Conditions

Min

Typical (4)

Max

Units

Center Frequency

-

836.5

-

MHz

Maximum Insertion Loss

824 – 849 MHz

-

2.0

2.9

dB

Amplitude Ripple

824 – 849 MHz

-

0.25

1.0

dB p-p

Absolute Attenuation

869 – 894 MHz

1574 – 1577 MHz

1648 – 1698 MHz

1850 – 2170 MHz

2472 – 2547 MHz

42.5

37.5

35

27

15

44.7

42.4

45

35.7

22.6

-

dB

Return Loss at Uplink Terminal (5)

824 – 849 MHz

9.3

12

-

dB

Input Power (6)

824 – 849 MHz

+27

dBm

Downlink Specifications

Parameter (3)

Conditions

Min

Typical (4)

Max

Units

Center Frequency

-

881.5

-

MHz

Maximum Insertion Loss

869 – 894 MHz

-

2.5

3.9

dB

Amplitude Ripple

869 – 894 MHz

-

0.4

2.2

dB p-p

Absolute Attenuation

824 – 849 MHz

1570 – 1580 MHz

1850 – 2170 MHz

2400 – 2484 MHz

50

40

33

15

55.3

56.0

41.0

23.4

-

dB

Return Loss at Downlink Terminal (5)

869 – 894 MHz

9.5

10.8

-

dB

Input Power (6)

869 – 894 MHz

+24

dBm

Uplink-Downlink Specifications

Parameter (3)

Conditions

Min

Typical (4)

Max

Units

Uplink-Downlink Isolation

824 – 849 MHz

849 – 869 MHz

869 – 894 MHz

50

34

45

56.9

38.4

46.4

-

dB

Source/Load Impedance (single-ended) (7)

-

50

-

Notes:

1. All specifications are based on the TriQuint schematics for the reference designs shown on page 4

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over

temperature

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances

4. Typical values are based on average measurements at room temperature on pcb

5. Excluding losses due to PCB

6. CW signal at 55°C for 10,000 hours

7. This is the optimum impedance in order to achieve the performance shown

Absolute Maximum Ratings

Parameter

Rating

Operable Temperature

-40 to +85 oC

Storage Temperature

-40 to +85 oC

Operation of this device outside the parameter ranges given above may cause permanent damage.

856908

836.5/881.5 MHz SAW Duplexer

Data Sheet: Rev H 10/25/12

- 4 of 8 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Reference Design – 50 SE Input, 50 SE Output

Schematic

Uplink

50

Single-ended

Input

1,2,3,4,6

7,9,10,12

811

5

ANT

50 50 50

50

Single-ended

Output

Downlink

50

Single-ended

Input

1,2,3,4,6

7,9,10,12

811

5

ANT

50 50

50

Single-ended

Output

Notes:

1. No impedance matching required

2. Actual matching values may vary due to PCB layout and parasitic

PC Board

Mounting Configuration

960880

JJJYM

GD

1.11

4.01

0.65

0.14

0.80

1.60

0.15x45°

CHAMFER

Notes:

Top, middle & bottom layers: 1 oz copper

Substrates: FR4 dielectric, .031” thick

Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick

Hole plating: Copper min .0008µm thick

Notes:

1. All dimensions are in millimeters.

2. This footprint represents a recommendation only.

Bill of Material

Reference Desg.

Value

Description

Manufacturer

Part Number

SMA

N/A

SMA connector

Radiall USA Inc.

9602-1111-018

PCB

N/A

3-layer

multiple

960880

856908

836.5/881.5 MHz SAW Duplexer

Data Sheet: Rev H 10/25/12

- 5 of 8 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Typical Performance (at room temperature)

856908

836.5/881.5 MHz SAW Duplexer

Data Sheet: Rev H 10/25/12

- 6 of 8 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

856908

836.5/881.5 MHz SAW Duplexer

Data Sheet: Rev H 10/25/12

- 7 of 8 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Mechanical Information

Package Information, Dimensions and Marking

TriQuint

logo

JJJYM

GD

code

Marking

Date Code

ID dot

3.80

1.42 NOM.

1.65 MAX.

0.86

1.60

0.80

0.45

0.90

0.60

0.15x45°

CHAMFER

Package Style: SMP-15N

Dimensions: 3.8 x 3.8 x 1.42 mm

Body: Al2O3 ceramic

Lid: Kovar, Ni plated

Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni

plating

All dimensions shown are nominal in millimeters

All tolerances are ±0.15mm except overall length and width

±0.10mm

The date code consists of: day of the current year (Julian,

3 digits), Y = last digit of the year, and M = manufacturing

site code

Tape and Reel Information

Standard T/R size = 4000 units/reel. All dimensions are in millimeters

Ø330

Direction of travel

2.0

Ø13.0

Ø20.2

2.7 12.8

Ø102

logo

TriQuint

ID dot

Ø1.5

2.0

0.3

8.0

4.0

4.1

1.8

1.75

5.512.0

Ø1.5

A

Section A-A

856908

836.5/881.5 MHz SAW Duplexer

Data Sheet: Rev H 10/25/12

- 8 of 8 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Product Compliance Information

ESD Information

ESD Rating: 1A

Value: Passes 300 V min.

Test: Human Body Model (HBM)

Standard: JEDEC Standard JESD22-A114

ESD Rating: B

Value: Passes 200 V min.

Test: Machine Model (MM)

Standard: JEDEC Standard JESD22-A115

Solderability

Compatible with the latest version of J-STD-020, lead

free solder, 260°C

Refer to Soldering Profile for recommended guidelines.

This part is compliant with EU 2002/95/EC RoHS

directive (Restrictions on the Use of Certain Hazardous

Substances in Electrical and Electronic Equipment).

This product also has the following attributes:

Halogen Free (Chlorine, Bromine)

Antimony Free

TBBP-A (C15H12Br402) Free

PFOS Free

SVHC Free

MSL Rating

Devices are Hermetic, therefore MSL is not applicable

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations, and information about

TriQuint:

Web: www.triquint.com Tel: +1.407.886.8860

Email: info-sales@tqs.com Fax: +1.407.886.7061

For technical questions and application information:

Email: flapplication.engineering@tqs.com

Important Notice

The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained

herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint

assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained

herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with

the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest

relevant information before placing orders for TriQuint products. The information contained herein or any use of such

information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property

rights, whether with regard to such information itself or anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining

applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.

Caution! ESD-Sensitive Device