Compact Diagonal
Series K2E200-AD Ø 200 mm
Highlights:
– Thermal overload protector (TOP) internally connected
Material: Impeller: PA plastic
Housing: PP plastic
Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request
Condensate discharge holes: None
Direction of rotation: Clockwise, seen on rotor
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
0100200300400500600
q
V
cfm
pfs
in. wg
1
2
3
5
6
7
4
8
Air performance measured as per:
ISO 5801, Installation category
A, without protection against
accidental contact.
Suction-side noise levels: LWA as
per ISO 13347, LPA measured at
1m distance to fan axis.
The values given are valid
under the measuring conditions
mentioned and may vary accoring
to the actual installation situation.
With any deviation to the standard
set-up, the specific values have
to be checked and reviewed once
installed or fitted.
For detailed information on the
measuring set-up, please contact
ebm-papst.
Curves n
rpm
Pe
W
I
A
LpAin
dB(A)
LwAin
dB(A)
3200 90 0.80 64 72
3120 95 0.83 63 71
3080 99 0.87 61 69
3095 97 0.85 61 69
3150 85 0.38 64 72
3065 90 0.40 63 71
3015 95 0.41 62 70
3035 92 0.40 62 70
(1) Nominal data at free air.
* Depending on installation and position.
Nominal Data
Air flow
Phase
Voltage
Frequency
Power input (1)
Speed (1)
Current draw (1)
Max back pressure
Temperature range (1)
Mass
Bearing
Ingress protection rating
UL
Chart
Type Motor cfm VAC Hz W rpm A in. H20 °C lbs
K2E200-AD08-02 M2E068-CF 550 1~115V 50/60 90 3200 0.80 0.844 -25...85 5.73 Ball IP44* Yes
K2E200-AD20-01 M2E068-CF 544 1~230V 50/60 85 3150 0.38 0.844 -25...65 5.73 Ball IP44* Yes
A
B
B
A
K2E200-ADXX-XX Dimensions shown in millimeters
Connection screen
L black N blue PE green/yellow
