SFH 203 P
SFH 203 PFA
Silizium-PIN-Fotodiode mit sehr kurzer Schaltzeit
Silicon PIN Photodiode with Very Short Switching Time
Lead (Pb) Free Product - RoHS Compliant
SFH 203 P SFH 203 PFA
2007-03-30 1
Wesentliche Merkmale
• Speziell geeignet für Anwendunge n im Bereich
von 400 nm bis 1100 nm (SFH 203 P) und bei
880 nm (SFH 203 PFA)
• Kurze Schaltzeit (typ. 5 ns)
• 5 mm-Plastikbauform im LED-Gehäuse
Anwendungen
• Industrieelektronik
• „Messen/Steuern/Regeln“
• Schnelle Lichtschranken für Gleich- und
Wechsellichtbetrieb
•LWL
Typ
Type Bestellnummer
Ordering Code
SFH 203 P Q62702P0942
SFH 203 PFA Q62702P0947
Features
• Especially suitable for applications from
400 nm to 1100 nm (SFH 203 P) and of 880 nm
(SFH 203 PFA)
• Short switching time (typ. 5 ns)
• 5 mm LED plastic package
Applications
• Industrial electronics
• For control and drive circuits
• Photointerrupters
• Fiber optic transmission systems
2007-03-30 2
SFH 203 P, SFH 203 PFA
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
Betriebs- und Lagertemperatur
Operating and storage temperature range Top; Tstg – 40 … + 100 °C
Sperrspannung
Reverse voltage VR50 V
Verlustleistung
Total power dissipation Ptot 150 mW
Kennwerte (TA = 25 °C)
Characteristics
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
SFH 203 P SFH 203 PFA
Fotostrom
Photocurrent
VR = 5 V, Normlicht/standard light A,
T = 2856 K, EV = 1000 lx
VR = 5 V, λ = 950 nm, Ee = 1 mW/cm2
IP
IP
9.5 (≥ 5)
–
–
6.2 (≥ 3.6)
μA
μA
Wellenlänge der max. Fotoempfindlichkeit
Wavelength of max. sensitivity λS max 850 900 nm
Spektraler Bereich der Fotoempfindlichkeit
S = 10 % von Smax
Spectr al range of sens itivity
S = 10 % of Smax
λ400 … 1100 750 … 1100 nm
Bestrahlungsempfindliche Fläche
Radiant sensitive area A 1 1 mm2
Abmessung der bestrahlungsempfindlichen Fläche
Dimensions of radiant sensitive area L × B
L × W1 × 1 1 × 1mm × mm
Halbwinkel
Half angle ϕ ± 75 ± 75 Grad
deg.
Dunkelstrom, VR = 20 V
Dark current IR 1 (≤ 10) 1 (≤ 10) nA
Spektrale Fotoempfindlichkeit, λ = 850 nm
Spectr al sensitivity Sλ0.62 0.59 A/W
Quantenausbeute, λ = 850 nm
Quantum yield η0.89 0.86 Electrons
Photon
SFH 203 P, SFH 203 PFA
2007-03-30 3
Leerlaufspannung
Open-circuit voltage
Ev = 1000 Ix, Normlicht/standard light A,
T = 2856 K
Ee = 0.5 mW/cm2, λ = 950 nm
VO
VO
350 (≥ 300)
–
–
300 (≥ 250)
mV
mV
Kurzschlußstrom
Short-circuit current
Ev = 1000 Ix, Normlicht/standard light A,
T = 2856 K
Ee = 0.5 mW/cm2, λ = 950 nm
ISC
ISC
9.3
–
–
3.0
μA
μA
Anstiegs- und Abfallzeit des Fotostromes
Rise and fall time of the photocurrent
RL = 50 Ω; VR = 20 V; λ = 850 nm; Ip = 800 μA
tr, tf5 5 ns
Durchlaßspannung, IF = 80 mA, E = 0
Forward voltage VF1.3 1.3 V
Kapazität, VR = 0 V, f = 1 MHz, E = 0
Capacitance C011 11 pF
Temperaturkoeffizient von VO
Temperature coefficient of VO
TCV– 2.6 – 2.6 mV/K
Temperaturkoeffizient von ISC
Temperature coefficient of ISC
Normlicht/standard light A
λ = 950 nm
TCI
0.18
–
–
0.2
%/K
Rauschäquivalente Strahlungsleistung
Noise equivalent power
VR = 20 V, λ = 850 nm
NEP 2.9 × 10– 14 2.9 × 10– 14
Nachweisgrenze, VR = 20 V, λ = 850 nm
Detection limit D* 3.5 × 1012 3.5 × 1012
Kennwerte (TA = 25 °C)
Characteristics (cont’d)
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
SFH 203 P SFH 203 PFA
W
Hz
------------
cm Hz×
W
--------------------------
SFH 203 P, SFH 203 PFA
2007-03-30 4
Relative Spectral Sensitivity
SFH 203 P, Srel = f (λ)
Photocurrent IP = f (Ee), VR = 5 V
Open-Circuit Voltage VO = f (Ee)
SFH 203 PFA
Directional Characteristics
Srel = f (ϕ)
λ
OHF01129
0
rel
S
400 600 800 1000 1200
20
40
60
80
%
100
nm
E
OHF01765
e
0
10
P
Ι
-2
10 10 110 210 4
10 -1
10 0
10 1
10 24
10
3
10
2
10
1
10
10 0
VO
μAmV
Ι
P
VO
2
W/cmμ
Relative Spectr. Sensitivity
SFH 203 PFA, Srel = f (λ)
Photocurrent IP = f (Ev), VR = 5 V
Open-Circuit Voltage VO = f (Ev)
SFH 203 P
λ
OHF01773
0
rel
S
400 600 800 1000 1200
20
40
60
80
%
100
nm
E
OHF01025
V
0
10
P
Ι
-1
10 10
1
10
2
10
4
10
0
10
0
V
O
μAmV
Ι
P
V
O
10
3
lx
1
10
2
10 10
3
10
2
1
10
Total Power Dissipation
Ptot = f (TA)
Dark Current
IR = f (VR), E = 0
Capacitance
C = f (VR), f = 1 MHz, E = 0
T
OHF00394
A
0
tot
P
020 40 60 80 ˚C 100
mW
20
40
60
80
100
120
140
160
V
OHF01026
R
R
Ι
0
4
10
3
10
2
10
10
1
pA
20 V 3010
SFH 203 P, SFH 203 PFA
2007-03-30 5
Maßzeichnung
Package Outlines
Maße in mm (inch) / Dimensions in mm (inch).
Lötbedingungen
Soldering Conditions
Wellenlöten (TTW) (nach CECC 00802)
TTW Soldering (acc. to CECC 00802)
0.6 (0.024)
0.4 (0.016)
5.9 (0.232)
5.5 (0.217)
1.0 (0.039)
0.5 (0.020)
3.85 (0.152)
3.35 (0.132)
5.0 (0.197)
4.2 (0.165)
29 (1.142)
27 (1.063)
1.8 (0.071)
1.2 (0.047)
2.54 (0.100)
spacing
0.6 (0.024)
0.4 (0.016)
0.8 (0.031)
0.4 (0.016)
ø5.1 (0.201)
ø4.8 (0.189)
Chip position
Area not flat
GEOY6648
Cathode
OHLY0598
0
050 100 150 200 250
50
100
150
200
250
300
T
t
C
s
235 C
10 s
C... 260
1. Welle
1. wave
2. Welle
2. wave
5 K/s 2 K/s
ca 200 K/s
CC... 130100
2 K/s Zwangskühlung
forced cooling
Normalkurve
standard curve
Grenzkurven
limit curves
2007-03-30 6
SFH 203 P, SFH 203 PFA
Published by
OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
Attention please!2007-03-30The information describes the type of component and shall not be considered as
assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may
contain dangerous substances. For information on the types in question please contact our Sales
Organization.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 , may only be used in life-supp ort devices or systems 2 with the express written approval of OSRAM OS.
1 A critical componen t is a component usedin a life-support device or syste m whose failure can reasonably be expected
to cause the failure of that life-support devic e or system, or to a ffect its safety or e ffectiveness of that device or system.
2 Life support devices or syste ms are intended (a) to be implanted in the human body, o r (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the he alth of the user may be endangered.
