DC/DC Converters TES 5 Series, 5 Watt CB Features Compact low profile SMD package Wide 2:1 input voltage range I/O isolation 1500VDC Operating temp. range -40C to +85C max. Short circuit protection Remote On/Off High accuracy of pin co-planarity Lead free design - RoHS compliant 3-years product warranty Scheme UL 60950-1 The TES-5 series is a new range of high performance 5W dc-dc converter modules in low profile SMD package with compact dimensions of only 33.4 x 20.6 x 10.2 mm. The 18 available models feature wide 2:1 input voltage range and tightly regulated output voltage. High efficiency allows operating temperatures up to 71C at full load. Further features are built-in EMI-filter to meet EN 55022,class A and FCC, level A without additional components and remote On/Off control. The products are qualified for soldering in a high temperature lead-free reflow solder process. Typical applications for these converters are battery powered equipment, instrumentation, communication systems and industrial controls. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 5-1210 3.3 VDC 1200 mA 76 % TES 5-1211 5 VDC 1000 mA 80 % TES 5-1212 TES 5-1213 TES 5-1221 9 - 18 VDC (12 VDC nominal) 12 VDC 420 mA 83 % 15 VDC 335 mA 83 % 5 VDC 500 mA 80 % TES 5-1222 12 VDC 210 mA 83 % TES 5-1223 15 VDC 165 mA 83 % TES 5-2410 3.3 VDC 1200 mA 78 % TES 5-2411 5 VDC 1000 mA 82 % TES 5-2412 TES 5-2413 TES 5-2421 18 - 36 VDC (24 VDC nominal) 12 VDC 420 mA 85 % 15 VDC 335 mA 85 % 5 VDC 500 mA 82 % TES 5-2422 12 VDC 210 mA 85 % TES 5-2423 15 VDC 165 mA 85 % TES 5-4810 3.3 VDC 1200 mA 78 % TES 5-4811 5 VDC 1000 mA 82 % TES 5-4812 12 VDC 420 mA 85 % TES 5-4813 36 - 75 VDC 15 VDC 335 mA 85 % 5 VDC 500 mA 82 % TES 5-4822 12 VDC 210 mA 85 % TES 5-4823 15 VDC 165 mA 85 % TES 5-4821 http://www.tracopower.com (48 VDC nominal) Page 1 of 3 DC/DC Converters TES 5 Series 5 Watt Input Specifications Input current no load 12 Vin models 20 mA 24 Vin models 5 mA 48 Vin models 3 mA Input current full load 12 Vin models 500 mA typ. 24 Vin models 250 mA typ. 48 Vin models 125 mA typ. Start-up voltage / under voltage shut down 12 Vin models 8 VDC / 7 VDC typ. 24 Vin models 16 VDC / 15 VDC typ. 48 Vin models 33 VDC / 31 VDC typ. Surge voltage (1 sec. max.) 12 Vin models 25 V max. 24 Vin models 50 V max. 48 Vin models 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, class A Output Specifications Voltage set accuracy 1 % Regulation - Input variation Vin min. to Vin max. 0.3 % max. - Load variation 20 - 100 % single output models 1 % max. dual output models balanced load 2 % max. Ripple and noise (20 MHz Bandwidth) 85 mVpk-pk max. Temperature coefficient 0.02 %/C Output current limitation >115 % of Iout max., constant current Short circuit protection indefinite, automatic recovery Capacitive load single output models 680 F max. dual output models 100 F max. (each output) General Specifications Temperature ranges - Operating -40C to +85C - Case temperature +100C max. - Storage -40C to +125C Derating 3.5 %/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >1 Mio. h Isolation voltage (60sec.) - Input/Output 1'500 VDC Isolation capacitance - Input/Output 650 pF typ. Isolation resistance - Input/Output (500 VDC) >1`000 MOhm Switching frequency 260 kHz typ. Safety standards UL 60950-1 , IEC/EN 60950-1 Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU Remote On/Off - On: 2.5 ... 5.5 VDC or open circuit - Off: -0.7 ... 0.8 VDC or short circuit pin 1 and 2(/3) - Off idle current: 10 mA All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 5 Series 5 Watt Physical Specifications Casing material non conductive plastic Weight 14 g (0.55oz) Moisture sensivity level (MSL) level 2 as per J-STD-020D.1 (to find at: www.jedec.org - free registration required) Supporting documents: www.tracopower.com/overview/tes5 Outline Dimensions 33.4 (1.31) 10.2 Detail A Seating Plane (0.40) S 0.4 (0.016) Pin 1 22.6 (0.89) 2 -Vin (GND) -Vin (GND) 3 -Vin (GND) -Vin (GND) 9 No con. Common 10 No con. No con. 11 No con. -Vout 12 No con. No con. 13 No con. No con. 14 +Vout +Vout 15 No con. No con. 16 -Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 24 No con. No con. 13 Detail A 1. (0 .0 6) 5 Top View 2.7 15.24 2.54 1.5 (0.11) (0.6) (0.1) (0.06) 27.0 (1.06) Pin Patterns: 2 x 2.54 15.24 3 x 2.54 (2 x 0.1) (0.6) (3 x 0.1) (0.006) 12 0.15 0.15 1 Dual 20.6 (0.81) 25.6 (1.01) 24 Pin-Out Single Remote On/Off Remote On/Off 2.7 (0.11) Dimensions in [mm], () = Inch Tolerances 0.25 (0.02) Pin pich tolerances 0.13 (0.005) 3.1 (0.12) 1.7 (0.07) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. July 13, 2018 Page 3 of 3