Clock Oscillators Surface Mount Type KC7050B Series (FXO-34F Series) CMOS/ 3.3V/ 5.0V/ 7.0x5.0mm Features * This crystal oscillator has a built-in high-precision CMOS IC suitable for a wide range of temperature * Lower noise and lower current for reduced power consumption * Supply voltage VCC=3.3/ 5.0V available Frequency Tolerance (Overall) Operating Freq. Tol. Temperature Note Code x 10-6 Range (C) 100 P -30 to +85 50 1.8 to 32MHz Q (Standard) 30 R RoHS Compliant How to Order KC7050B 25.0000 C 3 P B 00 Type Output Frequency Output Type (CMOS) Supply Voltage 5=5.0V, 3=3.3V Frequency Tolerance (See Table at Left) S ymmetry/ INH Function A: 40/ 60%, Disable B: 40/ 60%, Stand-by C ustomer Special Model Suffix (STD Specification is "00") Symmetry/ INH Function Code KC7050B-C5 KC7050B-C3 A A B B Freq. (MHz) 1.8 to 7.9 8 to 32 Specifications Item Conditions KC7050Bxx.xxxxC5xx00 (FXO-34F) KC7050Bxx.xxxxC3xx00 (FXO-34FL) 1.8 to 32 30 50 100 -40 to +85 -30 to +85 7 max. 55% 3.35% 12 max. 10 max. 8 max. 40 to 60@50%VCC 12 max. 16 max. 10% VCC max. 90% VCC min. 15 max. 0 to VCC 0 to VCC 0.8 max. 0.3 max. 2.2 min. 2.2 min. 150 max. 5 max. 10 max. Symbol Output Frequency Range fo Frequency Tolerance (Overall) f_tol Storage Temperature Range Operating Temperature Range Max. Supply Voltage Supply Voltage Current Consumption Stand-by/ Disable Current Symmetry Rise/ Fall Time Low Level Output Voltage High Level Output Voltage CMOS Load Input Voltage Range Low Level Input Voltage High Level Input Voltage Disable Time Enable Time Start-up Time T_stg T_use -- VCC ICC I_std SYM tr/ tf VOL VOH L_CMOS VIN VIL VIH t_dis t_ena t_str Units MHz x10-6 C C V V mA A % ns V V pF V V V ns ms ms Note: All electrical characteristics are defined at the maximum load and operating temperature range. Please contact us for inquiry about operating temperature range, available frequencies and other conditions. Dimensions (Unit: mm) #4 #2 #1 1.8 5.1 0.6 5.1 Plating: Ni+Au Tolerance: 0.2 Pad Connections #1 INH #2 GND #3 Output #4 VCC Pad1 Open "H" Level "L" Level INH Function Pad3 (Output) Active Active High Z (Output-Stop) 2.0 1.4 #3 (Unit: mm) 4.2 4.6 5.0 0.6 2.6 7.0 Recommended Land Pattern 1.8 Note: A capacitor of value 0.01F between VCC and GND is recommended.