DO NOT
SCALE FROM
THIS PRINT
JW-XX-XX-XX-X-XXX-XXX-XX-X
No OF POSITIONS
-02 THRU -24
ROW SPECIFICATION
-S: SINGLE (USE HFWJ-24-156)
LEAD STYLE
-04: T-1S8-05-X
-05: T-1S8-05-X
-T: MATTE TIN CONTACT AND TAIL
-TM: MATTE TIN CONTACT AND TAIL
OPTION
-P: PICK & PLACE PAD
(USE PPP-47, SEE FIG. 2, SHEET 2)
(-VS ONLY, 3 POSITION MIN,
.275[6.99] MIN POST HEIGHT)
OPTION
-VS: VERTICAL SURFACE MOUNT
POST HEIGHT
-XXX: SPECIFY POST HEIGHT
. 000 MIN (SEE NOTE 3)
-XXX: SPECIFY BOARD SPACING
SPACE OPTION
PLATING SPECIFICATION
(No OF POS x .156[.3.96])
.010[0.25]
.250
REF
6.35
.125 3.18
.078 1.97
.005 [.13]
((NO OF POS -1) x .156 [3.96])
-S: SINGLE
.125
REF
3.18
.045
SQ. REF
1.14
POST HEIGHT
-XXX
.008[0.20]
(.000 MIN)
T-1S8-05-T
C
MAX
1.250 [31.75]
.09 2.29
.250[6.35] MIN)
SPACE OPTION
-XXX
.008[0.20]
(1.080[27.43] MAX,
SEE NOTES 3 & 4
C
-S: SINGLE
.350[8.89] MIN)
SPACE OPTION
-XXX
.008[0.20]
(1.150[29.21] MAX,
.225 5.72
.31 7.87
90°
-
0°
+
4°
SEE NOTES 3 & 5
-VS: VERTICAL SURFACE MOUNT
C
.008[0.20]
.265
MIN
6.73
(SEE NOTE 3)
POST HEIGHT
-.100
SPACE OPTION
-VS IN-PROCESS
2
MAX SWAY
(EITHER DIRECTION)
24
01
-VS: VERTICAL SURFACE MOUNT
1.350 34.29
REF
POST HEIGHT
SPACE OPTION
-S IN-PROCESS
V
V V V
HFWJ-24-156
C
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.156[3.96] POWER STACKER ASSEMBLY
BY:
JW-XX-XX-XX-X-XXX-XXX-XX-X
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
06/12/2002
2
1
SHEET SCALE: 1.25:1
INSULATOR: LCP, COLOR: NATURAL
TERMINAL: PHOSPHOR BRONZE
F:\DWG\MISC\Mktg\JW-XX-XX-XX-X-XXX-XXX-XX-X-MKT.SLDDRW
NOTES:
1. HEIGHT VARIATION BETWEEN ANY TWO PINS SHALL BE .010[0.25] MAX.
2. MAXIMUM PIN ROTATION IN BODY: 2
.
3. TAIL TO BE SHEARED TO .265[6.73] MIN. A SECOND SHEAR STEP WILL
BE NEEDED AFTER FORMING TO ACHIEVE THE TAIL TO TAIL DIM.
4. MAXIMUM BURR ALLOWED: .004[0.10].
5. MAXIMUM BURR ALLOWED: .0015[0.038].
6. THROUGH HOLE TO BE BULK PACKAGED.
7. VERTICAL SURFACE MOUNT (-VS) TO BE PACKAGED AS FOLLOWS:
POSITIONS -04 THRU -24 ARE TO BE PACKAGED IN TUBES (SEE TABLE 1, SHEET 2);
POSITIONS -02 AND -03 ARE TO BE LAYER PACKAGED.
8. MIN PUSHOUT FORCE TO BE 3 LBS.
9. MAX CUT FLASH TO BE .020[0.51].
10. REPRESENTS A CRITICAL DIMENSION.
MAX BOW ALLOWED: .002[0.05] IN/IN
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION V
"R"
"S"
.300
REF
7.62
.450
REF
11.43
FIG 2
NOTE:
"R" = No OF POS x .156[3.96] REF
"S" = {("R" - .450[11.43]) / 2}
.020[12.90]
"G" = POST HEIGHT (.275[6.99] MIN) + .050[1.27] REF
-P: PICK & PLACE PAD OPTION
(-VS ONLY, 3 POS. MIN)
"G"
SHEET OF
.156[3.96] POWER STACKER ASSEMBLY
BY:
JW-XX-XX-XX-X-XXX-XXX-XX-X
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
06/12/2002
2
2
SHEET SCALE: 2.5:1
REVISION V
F:\DWG\MISC\Mktg\JW-XX-XX-XX-X-XXX-XXX-XX-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322