SILICON DIODES
Bulletin No.
D01EE0
(Sep., 2002)
SILICON VARISTORS
The information in this publication has been carefully checked and is believed to be
accurate; however, no responsibility is assumed for inaccuracies.
Sanken reserves the right to make changes without further notice to any products herein in
the interest of improvements in the performance, reliability, or manufacturability of its
products. Before placing an order, Sanken advises its customers to obtain the latest
version of the relevant information to verify that the information being relied upon is
current.
Application and operation examples described in this catalog are quoted for the sole
purpose of reference for the use of the products herein and Sanken can assume no
responsibility for any infringement of industrial property rights, intellectual property rights
or any other rights of Sanken or any third party which may result from its use.
When using the products herein, the applicability and suitability of such products for the
intended purpose or object shall be reviewed at the users responsibility.
Although Sanken undertakes to enhance the quality and reliability of its products, the
occurrence of failure and defect of semiconductor products at a certain rate is inevitable.
Users of Sanken products are requested to take, at their own risk, preventative measures
including safety design of the equipment or systems against any possible injury, death,
fires or damages to the society due to device failure or malfunction.
Sanken products listed in this catalog are designed and intended for the use as components
in general purpose electronic equipment or apparatus (home appliances, office equipment,
telecommunication equipment, measuring equipment, etc.). Before placing an order, the
user’s written consent to the specifications is requested.
When considering the use of Sanken products in the applications where higher reliability
is required (transportation equipment and its control systems, traffic signal control systems
or equipment, fire/crime alarm systems, various safety devices, etc.), please contact your
nearest Sanken sales representative to discuss and obtain written confirmation of your
specifications.
The use of Sanken products without the written consent of Sanken in the applications
where extremely high reliability is required (aerospace equipment, nuclear power control
systems, life support systems, etc.) is strictly prohibited.
Anti radioactive ray design is not considered for the products listed herein.
This publication shall not be reproduced in whole or in part without prior written approval
from Sanken.
CAUTION / WARNING
1
Contents
2
2
3
4
5
6
7
8
8
11
12
18
25
35
40
42
44
45
46
48
107
108
Selection Guide
Rectifier Diodes
Fast-Recovery Rectifier Diodes
Ultra-Fast-Recovery Rectifier Diodes
Schottky Barrier Diodes
Damper Diodes / High-Voltage Rectifier Diodes
Avalanche Diodes / Power Zener Diodes / Silicon Varistors
Symbols and Terms / trr Measurement Circuit
Taping Specifications
Marking Guide
Rectifier Diodes
Fast-Recovery Rectifier Diodes
Ultra-Fast-Recovery Rectifier Diodes
Schottky Barrier Diodes
Damper Diodes
High-Voltage Rectifier Diodes
Avalanche Diodes
Power Zener Diodes
Silicon Varistors
Characteristic Curves
Application Notes
Product Index by Part Number
2
Selection Guide
Rectifier Diodes
●1 in one-package
100 1.0 45 EM 1Y Axial (E1) 12
3.0 200 RM 4Y Axial (R4)
0.9 30 SFPM-52
Surface Mount (SFP)
45 SFPM-62
35 AM01Z Axial (A0)
1.0 45 EM01Z Axial (E0)
200 45 EM 1Z Axial (E1) 13
50 RM 1Z Axial (R1)
1.2 100 RM 2Z Axial (R2)
80 RO 2Z
1.5 120 RM 10Z Axial (R1)
3.0 200 RM 4Z Axial (R4)
0.9 30 SFPM-54
45 SFPM-64
Surface Mount (SFP)
50 SFPM-74
1.0 35 AM01 Axial (A0)
45 EM01 Axial (E0)
45 EM 1 Axial (E1)
400 50 RM 1 Axial (R1) 14
80 EM 2 Axial (E1)
1.2 150 RM 10 Axial (R1)
100 RM 2 Axial (R2)
80 RO 2
2.5 150 RM 3 Axial (R3)
3.0 200 RM 4 Axial (R4)
35 AM01A Axial (A0)
1.0 45 EM01A Axial (E0)
45 EM 1A Axial (E1)
50 RM 1A Axial (R1)
80 EM 2A Axial (E1)
600 150 RM 10A Axial (R1) 15
1.2 100 RM 11A
100 RM 2A Axial (R2)
80 RO 2A
2.5 150 RM 3A Axial (R3)
3.0 200 RM 4A Axial (R4)
3.2 350 RM 4AM
0.8 40 RM 1B Axial (R1)
1.0 35 EM 1B Axial (E1)
80 EM 2B
150 RM 10B Axial (R1)
800 1.2 100 RM 11B 16
100 RM 2B Axial (R2)
80 RO 2B
2.5 100 RM 3B Axial (R3)
3.0 150 RM 4B Axial (R4)
0.8 40 RM 1C Axial (R1)
1.0 35 EM 1C Axial (E1)
100 RM 11C Axial (R1)
1000 1.2 100 RM 2C Axial (R2) 17
80 RO 2C
2.0 150 RM 3C Axial (R3)
3.0 100 RM 4C Axial (R4)
VRM
(V) IF
(A) IFSM
(A) Part Number Package
Page
●2 in one-package
100 20 120 FMM-31S, R FM80 12
200 10 100 FMM-22S, R TO-220F 13
20 120 FMM-32S, R FM80
400 10 100 FMM-24S, R TO-220F 14
20 120 FMM-34S, R FM80
600 10 100 FMM-26S, R TO-220F 15
20 120 FMM-36S, R FM80
VRM
(V) IF
(A) IFSM
(A) Part Number Package
Page
●Bridge
100 4.0 80 RBV-401 RBV-40 12
6.0 100 RBV-601 RBV-60
4.0 80 RBV-402 RBV-40
200 6.0 120 RBV-602 RBV-60 13
10 80 RBV-4102 RBV-40
400 4.0 80 RBV-404 RBV-60 14
6.0 150 RBV-604 RBV-40
4.0 80 RBV-406
4.0 120 RBV-406H RBV-40
4.0 120 RBV-406M
6.0 150 RBV-606 RBV-60
6.0 140 RBV-606H
600 8.0 120 RBV-4086H RBV-40 15
10 120 RBV-4106M
13 80 RBV-1306
15 200 RBV-1506
15 150 RBV-1506S RBV-60
15 150 RBV-1506J
25 350 RBV-2506
800 4.0 100 RBV-408 RBV-40 16
6.0 170 RBV-608 RBV-60
1000 4.0 100 RBV-40C RBV-40 17
15 200 RBV-150C RBV-60
VRM
(V) IF
(A) IFSM
(A) Part Number Package
Page
*
*: Under development
3
●1 in one-package
●2 in one-package
100 10.0 40 0.4 0.18 FMU-21S, R TO-220F 18
5.0 30 0.4 0.18 FMU-12S, R TO-220F
200 10.0 40 0.4 0.18 FMU-22S, R 19
20.0 80 0.4 0.18 FMU-32S, R FM80
5.0 30 0.4 0.18 FMU-14S, R TO-220F
400 10.0 40 0.4 0.18 FMU-24S, R 20
20.0 80 0.4 0.18 FMU-34S, R FM80
5.0 30 0.4 0.18 FMU-16S, R
600 30 0.4 0.18 FMUP
-2056
TO-220F 21
10.0 40 0.4 0.18 FMU-26S, R
20.0 80 0.4 0.18 FMU-36S, R FM80
VRM
(V) IF
(A) IFSM
(A) Part Number Package
Page
*: Under development
*
Fast-Recovery Rectifier Diodes
trr 1
(µs) trr 2
(µs)
0.25 15 0.4 0.18 RU 1B
0.6 15 0.4 0.18 RF 1B
35 4.0 1.3 RH 1B Axia (R1)
800 0.7 30 1.5 0.6 RS 1B 22
1.0 20 0.4 0.18 RU 2B
1.1 20 0.4 0.18 RU 3B Axial (R2)
3.0 50 0.4 0.18 RU 4B Axial (R4)
0.2 15 0.4 0.18 RU 1C
0.6 35 4.0 1.3 RH 1C Axial (R1)
1000 0.8 20 0.4 0.18 RU 2C 23
1.5 20 0.4 0.18 RU 3C Axial (R2)
2.5 50 0.4 0.18 RU 4C Axial (R4)
1500 0.5 20 1.5 0.6 ES01F Axial (E0)
20 1.5 0.6 ES 1F Axial (E1) 24
2000 0.2 20 4.0 1.3 RC 2 Axial (R1)
VRM
(V) IF
(A) IFSM
(A) Part Number Package
Page
trr 1
(µs) trr 2
(µs)
trr 1 : IR = IF 90% Recovery Point
trr 2 : IR = 2•IF 75% Recovery Point
Selection Guide
1.2 25 0.2 0.08 EU 2YX Axial (E1)
1.5 30 0.2 0.08 RU 2YX Axial (R1)
2.0 50 0.2 0.08 RU 3YX Axial (R2)
100 3.5 100 0.4 0.18 RU 30Y Axial (R3) 18
70 0.4 0.18 RU 4Y Axial (R4)
4.0 100 0.2 0.08 RU 4YX
10.0 100 0.2 0.08 FMU-G2YXS TO-220F-2Pin
0.25 15 0.4 0.18 EU01Z Axial (E0)
15 0.4 0.18 EU 1Z Axial (E1)
0.5 15 0.4 0.18 AU01Z Axial (A0)
20 1.5 0.6 AS01Z
0.6 30 4.0 1.3 EH 1Z Axial (E1)
15 0.4 0.18 RF 1Z Axial (R1)
35 4.0 1.3 RH 1Z
200 0.7 30 1.5 0.6 ES 1Z Axial (E1) 19
30 1.5 0.6 ES01Z Axial (E0)
0.8 25 0.4 0.18 AU02Z Axial (A0)
15 0.4 0.18 EU02Z Axial (E0)
1.0 15 0.4 0.18 EU 2Z Axial (E1)
20 0.4 0.18 RU 2Z Axial (R1)
3.5 80 0.4 0.18 RU 30Z Axial (R3)
70 0.4 0.18 RU 4Z Axial (R4)
15 0.4 0.18 EU01 Axial (E0)
0.25 15 0.4 0.18 EU 1 Axial (E1)
15 0.4 0.18 RU 1 Axial (R1)
0.5 15 0.4 0.18 AU01 Axial (A0)
20 1.5 0.6 AS01
0.6 30 4.0 1.3 EH 1 Axial (E1)
15 0.4 0.18 RF 1 Axial (R1)
35 4.0 1.3 RH 1
0.7 30 1.5 0.6 ES01 Axial (E0)
400 30 1.5 0.6 ES 1 Axial (E1) 20
0.8 25 0.4 0.18 AU02 Axial (A0)
1.0 15 0.4 0.18 EU02 Axial (E0)
15 0.4 0.18 EU 2 Axial (E1)
1.1 20 0.4 0.18 RU 2M Axial (R1)
1.5 20 0.4 0.18 RU 3 Axial (R2)
50 0.4 0.18 RU 3M
2.0 200 0.4 0.18 RU 30 Axial (R3)
3.0 150 0.4 0.18 RU 31
50 0.4 0.18 RU 4 Axial (R4)
3.5 70 0.4 0.18 RU 4M
15 0.4 0.18 EU01A Axial (E0)
0.25 15 0.4 0.18 EU 1A Axial (E1)
15 0.4 0.18 RU 1A Axial (R1)
0.5 15 0.4 0.18 AU01A Axial (A0)
20 1.5 0.6 AS01A
0.6 30 4.0 1.3 EH 1A Axial (E1)
15 0.4 0.18 RF 1A Axial (R1)
35 4.0 1.3 RH 1A
30 1.5 0.6 ES01A Axial (E0)
0.7 30 1.5 0.6 ES 1A Axial (E1)
30 1.5 0.6 RS 1A Axial (R1)
0.8 25 0.4 0.18 AU02A Axial (A0)
600 15 0.4 0.18 EU02A Axial (E0) 21
1.0 15 0.4 0.18 EU 2A Axial (E1)
20 0.4 0.18 RU 2
1.1 20 0.4 0.18 RU 2AM Axial (R1)
20 0.4 0.18 RU 20A
1.5 20 0.4 0.18 RU 3A Axial (R2)
50 0.4 0.18 RU 3AM
2.0 200 0.4 0.18 RU 30A Axial (R3)
3.0 150 0.4 0.18 RU 31A
50 0.4 0.18 RU 4A Axial (R4)
3.5 70 0.4 0.18 RU 4AM
5.0 30 0.4 0.18 FMUP-1056 TO-220F-2Pin
10.0 40 0.4 0.18 FMUP-1106
VRM
(V) IF
(A) IFSM
(A) Part Number Package
Page
trr 1
(µs) trr 2
(µs)
4
●1 in one-package
1.0 25 100 50 AG01Y Axial (A0)
1.1 30 100 50 EG01Y Axial (E0)
70 30 100 50 EG 1Y Axial (E1) 25
1.5 50 100 50 RG 10Y Axial (R1)
50 100 50 RG 2Y Axial (R2)
3.5 100 100 50 RG 4Y Axial (R4)
0.7 15 100 50 AG01Z Axial (A0)
0.8 15 100 50 EG01Z Axial (E0)
15 100 50 EG 1Z Axial (E1)
0.9 25 50 35 SFPL-52
Surface Mount (SFP)
25 50 35 SFPL-62
1.0 25 50 35 AL01Z Axial (A0)
25 100 50 EN 01Z Axial (E0)
1.2 50 100 50 RG 10Z Axial (R1)
50 100 50 RG 2Z Axial (R2)
30 30 25 SFPX-62
Surface Mount (SFP)
1.5 25 40 30 EL02Z Axial (E0)
20 50 35 EL 1Z Axial (E1)
60 100 50 RN 1Z
30 30 25 RX 10Z Axial (R1)
200 2.0 30 50 35 RL 10Z
30 50 35 RL 2Z Axial (R2) 26
70 100 50 RN 2Z
80 30 25 RX 3Z Axial (R3)
3.0 80 100 50 RN 3Z
80 100 50 RG 4Z Axial (R4)
50 30 25 SPX-G32S
Surface Mount (D Pack)
80 50 35 RL 3Z Axial (R3)
3.5 80 50 35 RL 4Z Axial (R4)
120 100 50 RN 4Z
65 40 30 FML-G12S
5.0 100 100 50 FMN-G12S
65 150 70 FMP-G12S TO-220F-2Pin
65 30 25 FMX-G12S
10.0 150 30 25 FMX-G22S
150 40 30 FML-G22S
300 2.0 30 30 25 SFPX-63
Surface Mount (SFP)
28
5.0 70 50 35 FML-G13S TO-220F-2Pin
0.7 15 100 50 AG01 Axial (A0)
0.8 15 100 50 EG01 Axial (E0)
15 100 50 EG 1 Axial (E1)
1.0 25 50 30 SFPX-64
Surface Mount (SFP)
20 50 35 AL01 Axial (A0)
1.2 50 100 50 RG 10 Axial (R1)
50 100 50 RG 2 Axial (R2)
400 1.5 25 50 35 EL 1 Axial (E1) 29
2.0 40 50 35 RL 2 Axial (R2)
3.0 70 50 35 RL 31 Axial (R3)
80 100 50 RG 4 Axial (R4)
3.5 80 50 35 RL 3 Axial (R3)
70 50 35 FML-G14S
5.0 70 100 50 FMN-G14S TO-220F-2Pin
70 30 25 FMX-G14S
0.5 15 100 50 AG01A Axial (A0)
10 100 50 EG01A Axial (E0)
0.6 10 100 50 EG 1A Axial (E1)
1.0 50 100 50 RG 10A Axial (R1)
600 50 100 50 RG 2A Axial (R2) 30
1.2 30 50 35 RD 2A
2.0 60 50 35 RL 3A Axial (R3)
50 100 50 RG 4A Axial (R4)
3.0 80 50 35 RL 4A
4.0 50 100 50 FMG-G26S TO-220F-2Pin
VRM
(V) IF
(A) IFSM
(A) Part Number Package
Page
50 50 35 FML-G16S
5.0 50 100 50 FMN-G16S TO-220F-2Pin
50 30 25 FMX-G16S
600 8.0 80 100 50 FMG-G36S FM80-2Pin 30
10.0 100 50 30 FMD-G26S TO-220F-2Pin
100 35 25 FMX-G26S
30.0 180 150 70 MP3-306
Surface Mount (TO-220S)
800 3.0 50 70 35 FMC-G28S TO-220F-2Pin 32
5.0 60 70 35 FMC-G28SL
0.2 5 200 80 AP01C Axial (A0)
5 200 80 EP01C Axial (E0)
0.4 10 100 50 RU 1P Axial (R1)
1000 0.5 10 100 50 EG01C Axial (E0) 33
0.7 10 100 50 RG 1C Axial (R1)
2.0 60 100 50 RG 4C Axial (R4)
3.0 30 100 50 FMG-G2CS TO-220F-2Pin
5.0 60 150 70 FMG-G3CS FM80-2Pin
2000 0.1 5 200 80 RP 1H Axial (R1) 34
VRM
(V) IF
(A) IFSM
(A) Part Number Package
Page
●2 in one-package
35 30 25 FMX-12S
5.0 35 40 30 FML-12S TO-220F
35 100 50 FMG-12S, R
6.0 80 30 25 SPX-62S
Surface Mount (D Pack)
65 30 25 FMX-22S TO-220F
10.0 65 40 30 FML-22S
200 65 40 30 MPL-102S
Surface Mount (TO-220S)
26
65 100 50 FMG-22S, R TO-220F
15.0 100 30 25 FMX-22SL
150 30 25 FMX-32S FM80
20.0 150 40 30 FML-32S
110 50 35 MP2-202S
Surface Mount (TO-220S)
150 100 50 FMG-32S,R FM80
5.0 40 50 35 FML-13S
35 100 50 FMG-13S, R
70 50 35 FML-23S TO-220F
10.0 65 100 50 FMG-23S, R
300 65 30 25 FMX-23S 28
65 30 25 MPX-2103
Surface Mount (TO-220S)
100 30 25 FMX-2203 TO-220F
20.0 100 50 35 FML-33S
150 100 50 FMG-33S, R FM80
100 30 25 FMX-33S
5.0 40 50 35 FML-14S
35 100 50 FMG-14S, R TO-220F
400 8.0 65 100 50 FMG-24S, R 29
10.0 70 50 35 FML-24S
16.0 100 100 50 FMG-34S, R FM80
20.0 100 50 35 FML-34S
3.0 50 70 35 FMC-26U TO-220F
600 6.0 50 100 50 FMG-26S, R 30
15.0 80 100 50 FMG-36S, R FM80
20.0 100 65 35 FML-36S
800 3.0 50 70 35 FMC-28U TO-220F 31
1200 3.0 50 70 35 FMC-26UA TO-220F-2Pin 34
1600 3.0 50 70 35 FMC-28UA
VRM
(V) IF
(A) IFSM
(A) Part Number Package
Page
●Bridge
200 4.0 80 40 30 RBV-402L RBV-40 26
6.0 100 50 35 RBV-602L RBV-60
VRM
(V) IF
(A) IFSM
(A) Part Number Package
Page
*: Under development
*
*
*
*
*: Under development
*
Ultra-Fast-Recovery Rectifier Diodes trr 1 : IR = IF 90% Recovery Point
trr 2 : IR = 2•IF 75% Recovery Point
trr 1
(ns) trr 2
(ns)
trr 1
(ns) trr 2
(ns)
trr 1
(ns) trr 2
(ns)
trr 1
(ns) trr 2
(ns)
Selection Guide
5
●1 in one-package
0.47 MI1A3
Surface Mount
(Small)
0.39 MI2A3
0.36 SFPA-53
Surface Mount (SFP)
1.0 0.45 SFPJ-53
0.55 AK 03 Axial (A0)
0.36 EA 03 Axial (E0)
0.55 EK 03
1.5 0.55 EK 13 Axial (E1)
1.7 0.55 RK 13 Axial (R1)
30 0.36 SFPA-63 35
2.0 0.45 SFPJ-63
Surface Mount (SFP)
0.55 SFPE-63
0.36 RA 13 Axial (R1)
2.5 0.55 RK 33 Axial (R2)
0.36 SFPA-73
Surface Mount (SFP)
3.0 0.45 SFPJ-73
0.45 RJ 43 Axial (R4)
0.55 RK 43
5.0 0.45 SPJ-G53S
Surface Mount (D Pack)
0.55 SFPB-54
Surface Mount (SFP)
0.55 AK 04
1.0 0.58 AW 04 Axial (A0)
0.6 AE 04
0.55 EK 04 Axial (E0)
1.5 0.55 SFPB-64
Surface Mount (SFP)
0.55 EK 14 Axial (E1)
1.7 0.55 RK 14 Axial (R1)
40 0.50 SFPB-74
Surface Mount (SFP)
36
2.0 0.60 SFPE-64
0.6 EE 04 Axial (E0)
2.5 0.55 RK 34 Axial (R2)
0.55 SPB-G34S
Surface Mount (D Pack)
3.0 0.55 RK 44 Axial (R4)
0.55 FMB-G14 TO-220F-2Pin
5.0 0.55 SPB-G54S
Surface Mount (D Pack)
0.55 FMB-G14L TO-220F-2Pin
10.0 0.55 FMB-G24H
0.62 SFPB-56
Surface Mount (SFP)
0.7 0.62 AK 06 Axial (R0)
0.62 EK 06 Axial (E0)
0.7 SFPW-56
Surface Mount (SFP)
1.5 0.62 EK 16 Axial (E1)
60 0.62 RK 16 Axial (R1) 38
0.62 SFPB-76
Surface Mount (SFP)
2.0 0.69 SFPB-66
0.62 RK 36 Axial (R2)
3.5 0.62 RK 46 Axial (R4)
5.0 0.62 FMB-G16L TO-220F-2Pin
6.0 0.70 SPB-G56S
Surface Mount (D Pack)
0.81 SFPB-59
Surface Mount (SFP)
0.7 0.81 AK 09 Axial (A0)
0.81 EK 09 Axial (E0)
0.81 SFPB-69
Surface Mount (SFP)
90 1.5 0.81 EK 19 Axial (E1) 39
0.81 RK 19 Axial (R1)
2.0 0.81 RK 39 Axial (R2)
3.5 0.81 RK 49 Axial (R4)
4.0 0.81 FMB-G19L TO-220F-2Pin
VRM
(V) IF
(A) VF
(V) Part Number Package
Page
6.0 0.45 SPJ-63S
Surface Mount (D Pack)
30 10.0 0.45 FMJ-23L 35
20.0 0.45 FMJ-2203 TO-220F
30.0 0.45 FMJ-2303
4.0 0.55 FMB-24 TO-220F
6.0 0.55 SPB-64S
Surface Mount (D Pack)
0.55 FMB-24M TO-220F
0.55 FMW-24L
10.0 0.55 FMB-24L TO-220F
0.60 FME-2104
12.0 0.58 FMB-34S FM80
40 0.60 MPE-24H TO-220S 36
0.55 FMW-24H
15.0 0.55 FMB-24H TO-220F
0.60 FME-24H
0.55 FMB-34 FM80
20.0 0.55 FMB-2204
0.55 FMW-2204 TO-220F
30.0 0.55 FMB-2304
0.55 FMB-34M FM80
4.0 0.62 FMB-26 TO-220F
6.0 0.65 SPB-66S
Surface Mount (D Pack)
10.0 0.62 FMB-26L TO-220F
60 0.72 FME-2106 38
15.0 0.62 FMB-36 FM80
20.0 0.7 FMB-2206 TO-220F
30.00.7 FMB-2306
0.62 FMB-36M FM80
4.0 0.81 FMB-29 TO-220F
8.0 0.81 FMB-29L
90 15.0 0.81 FMB-39 FM80
20.0 0.85 MPE-29G TO-220S 39
0.81 FMB-39M FM80
100 20.0 0.85 FME-220A TO-220F
30.0 0.85 FME-230A
VRM
(V) IF
(A) VF
(V) Part Number Package
Page
●2 in one-package
60 4.0 0.62 RBV-406B RBV-40 38
VRM
(V) IF
(A) VF
(V) Part Number Package
Page
●Bridge
**
*
*
*: Under development
Schottky Barrier Diodes
Selection Guide
6
1300 1.0 4.0 1.3 RH 2D Axial (R2)
0.8 4.0 1.3 RH 10F Axial (R1)
1.0 4.0 1.3 RH 2F Axial (R2)
2.0 2.0 0.8 RS 3FS Axial (R3)
For TV 1500 4.0 1.3 RH 3F
2.5 4.0 1.3 RH 4F Axial (R4)
1.0 0.4 RS 4FS
1600 2.5 4.0 1.3 RH 3G Axial (R3)
1700 6.0 2.0 0.8 FMV-G2GS TO-220F-2Pin
1800 10.0 1.8 0.7 FMR-G5HS TO-3PF-2Pin
1300 1.5 0.4 0.18 RU 4D Axial (R4)
2.5 0.4 0.18 RU 4DS 40
2.0 0.7 0.3 RP 3F Axial (R3)
5.0 0.7 0.3 FMQ-G1FS
0.5 0.2 FMQ-G2FS
For CRT Display 1500 0.5 0.2 FMQ-G2FMS TO-220F-2Pin
10.0 0.6 0.25 FMU-G2FS
1.2 0.4 FMQ-G2FLS
0.5 0.2 FMQ-G5FMS
1700 10.0 0.5 0.2 FMQ-G5GS TO-3PF-2Pin
1800 8.0 1.0 0.4 FMP-G5HS
1300 0.5 0.1 0.05 RG 2A2 Axial (R2)
1600 1.0 0.07 0.035 RC 3B2 Axial (R3)
VRM
(V) IF
(A) Part NumberApplication Package Page
For TV 1500/600 5.0 4.0/0.4 1.3/0.18 FMV-3FU TO-3PF
1700/600 5.0 2.0/0.4 0.8/0.18 FMV-3GU
0.7/0.1 0.3/0.05 FMP-3FU TO-3PF
1500/600 5.0 0.7/0.1 0.3/0.05 FMP-2FUR 41
For CRT Display 2.0/0.15 0.8/0.07 FMQ-2FUR TO-220F
1.0/0.1 —FMT-2FUR
1700/800 5.0 0.7/0.07 0.3/0.04 FMQ-3GU TO-3PF
VRM
(V) IF
(A) Part NumberApplication Package Page
Damper Diodes for Diode Moduration
2 2 SHV-02 16 0.18 —
For General Purpose 3 2 SHV-03S 16 0.18 —
3 2 SHV-03 16 0.18 —
10 2 SHV-10 40 0.18 —
12 2 SHV-12 45 0.18 —
For General FBT 14 2 SHV-14 55 0.18 —
16 2 SHV-16 60 0.18 —
20 2 SHV-20 75 0.18 —
24 2 SHV-24 75 0.18 —
6 2 SHV-06EN 26 0.15 0.2
8 2 SHV-08EN 30 0.15 0.2 Axial 42
10 2 SHV-10EN 38 0.15 0.2
12 2 SHV-12EN 45 0.15 0.2
8 2 SHV-08DN 30 0.15 0.2
10 2 SHV-10DN 38 0.15 0.2
12 2 SHV-12DN 45 0.15 0.2
For General Type Microwave Oven
9 350 HVR-1X-40B 9 ——
For Inverter Type Microwave Oven
8 350 UX-F5B 14 0.15 —
2.5 30 SHV-05J 5V
Z = 2.6 to 5.0kV
For Automotive Ignition Coil
3 30 SHV-06JN 6V
Z = 3.2 to 6.0kV
4 30 SHV-08J 8V
Z = 4.5 to 8.0kV
15 30 SHV-30J 30 VZ = 16.0 to 30.0kV
VRM
(kV) VF max
(V) trr (µs) IF = IRP
Ta = 25ºC Ta = 100ºC
IF (AV)
(mA) Part NumberApplication Package Page
High-Voltage Rectifier Diodes
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
*: Under development
*
Damper Diodes trr 1 : IR = IF 90% Recovery Point
trr 2 : IR = 2•IF 75% Recovery Point
trr 1
(µs) trr 2
(µs)
trr 1
(µs) trr 2
(µs)
✽ TV High Voltage Rectifier Capacitive Load, Tc 100ºC
Selection Guide
For CRT Display
Compensation
For High Frequency
Multi-layer FBT
For Ultra-High Frequency
Multi-layer FBT
7
27 to 33 20 30 RZ1030
34 to 40 28 30 RZ1040
50 to 60 40 30 RZ1055
60 to 70 50 30 RZ1065 Axial (R1)
90 to 110 80 30 RZ1100
115 to 135 105 30 RZ1125
140 to 160 125 30 RZ1150 44
EZ0150 Axial (E0)
150 to 165 138.7 30 RZ1155
165 to 185 150 30 RZ1175
185 to 215 180 30 RZ1200 Axial (R1)
220 to 250 179.5 30 RZ1235
235 to 265 190 30 RZ1250
VZ
(V) VRDC
(V) ITSM
(A) Part Number Package Page
Avalanche Diodes with built-in Thyristor
28±3.0 1500 20 65.0 PZ 628 Axial
28±3.0 50 20 2.0 SFPZ-68 Surface Mount (SFP) 45
36±3.6 450 30 11.0 SPZ-G36 Surface Mount (D Pack)
1.5 max 400 15 VR-60SS
2.3±0.25 150 7.5 VR-61SS
Symmetrical type 4 max 150 —SV-2SS Axial (E0) 46
2 max 250 —SV-3SS
1.8±0.2 150 —SV-4SS
1.2±0.2 200 30 SV 02YS
1.8±0.2 150 16 SV 03YS
Unsymmetrical type 2.35±0.25 100 12 SV 04YS Axial (E0) 47
3.0±0.3 80 10 SV 05YS
3.5±0.35 70 8 SV 06YS
VZ
(V) VDC
(V)
PR
(W) IZSM
(A)
IF
(mA)
VF
(V) IFSM
(A)
Part Number Package Page
Power Zener Diodes
Part NumberDivision Package Page
Silicon Varistors
Selection Guide
8
Symbols and Terms / trr Measurement Circuit
Taping Specifications
Symbols and Terms
t
rr (Reverse Recovery Time) Measurement Circuit
Taping Dimensions (mm)
Package Dimensions (mm) and Markings
Quantity
Taping name
The suffix “V”
is added to the
Part Number
V
Axial taping Reel
The suffix “V1”
is added to the
Part Number
V1
Axial taping Ammunition (Ammo) pack
VRSM
VRM
VP-P
VR
VF
VB
IF
IF (AV)
IFSM
IRSM
IR
IRP
IR (H)
IZ
IZSM
Ta
Tj
Topr
Tc
Tstg
trr
Ct
Rth (j-
)
Rth (j-c)
z
Rz
PF (AV)
I2t
Peak Reverse Surge Voltage
Peak Reverse Voltage
Reverse Voltage (Peak to Peak)
Reverse Voltage
Foward Voltage
Breakdown Voltage
Foward Current
Average Foward Current
Peak Foward Surge Current
Peak Reverse Surge Current
Reverse Current
Peak Reverse Current
Reverse Current (Hight Temperature)
Avalanche Current
Allowable Avalanche Current
Ambient Temperature
Junction Tmeperature
Operating Ambient Temperature
Case Temperature
Storage Temperature
Reverse Recovery Time
Total Capacitance Between Terminals
Thermal Resistance, Junction to Lead
Thermal Resistance, Junction to Case
Temperature Coefficient of Breakdown Voltage
Equivalent Resistance of Breakdown region
Average Forward Power Dissipation
I2t Limitting Value
+0.5
–1.0
+5
0 +1
0 +5
0
0.5max 1.0
5.08+0.38
0.5max
max
52.0
(Blue)
(White)
6.06.0
0.5
340
Core Flange
81
75 25
83
Part No., Lot No.,
Quantity
15
29
75
Fixture
±2
±2
±2
±2
±1
±1
±2
±0.1
5,000 pcs/reel
2.7 body
2.4 body
(4 body)
3,000 pcs/reel
0.5max 1.0
5.08
0.5max
52.0 6.06.0
max
0.5
(Blue)
(White)
+5
0 +1
0 +5
0
+0.5
–1.0
+0.38
Broken lines:
perforation
255max
77max
77max
Part No., Lot No., Quantity
2,000 pcs/box
(2.7 body)
3,000 pcs/box
(2.4 body)
1,000 pcs/box
(4 body)
20µs200µs
100µF specimen
100Ω
IF
IRP
20µs200µs
100µF specimen
10Ω
20µs200µs
100µF specimen
4Ω
500mA500mA
50mA
IF
IRP 500mA1A
250mA
IF
IRP 100mA100mA
10mA
IF
IRP 100mA200mA
50mA
IF
IRP 10mA10mA
1mA
IF
IRP 10mA20mA
5mA
trr 1 IF=IRP=100mA 90% Recovery
trr 2 IF=100mA, IRP=200mA 75% Recovery
trr 1 IF=IRP=10mA 90% Recovery
trr 2 IF=10mA, IRP=20mA 75% Recovery trr 1 IF=IRP=500mA 90% Recovery
trr 2 IF=500mA, IRP=1A 75% Recovery
trr 2
trr 1
trr 2
trr 1
trr 2
trr 1
9
Taping Specifications
Taping Dimensions (mm)
Taping name Package Dimensions (mm) and Markings
Quantity
The suffix “WS”
is added to the
Part Number
The suffix “WK”
is added to the
Part Number
WK
WS
The suffix “W”
is added to the
Part Number
W
The suffix “V4”
is added to the
Part Number
V4
The suffix “V3”
is added to the
Part Number
V3
The suffix “V0”
is added to the
Part Number
V0
Radial taping
(for A0 series)
Radial taping
(for A0 series)
Radial taping
Axial taping
Axial taping
Axial taping Ammunition (Ammo) pack
Reel
Ammunition (Ammo) pack
Ammunition (Ammo) pack
Ammunition (Ammo) pack
2,500 pcs/box
(2.4 body)
1,000 pcs/box
(5.2 body)
1,500 pcs/reel
(5.2 body)
2,000 pcs/box
(2.7 body)
3,000 pcs/box
(2.4 body)
4,000 pcs/box
2.7
body
0.6 lead only
0.5max 1.0
5.08
0.5max
max
26.0 6.06.0
0.5
(Blue)
(White)
+5
0 +1
0 +5
0
+0.5
–1.0
+0.38
0.5max 1.0
10
0.5max
52.0 6.0
6.0
max
1.0
(Blue)
(White)
+5
0 +1
0 +5
0
+0.5
–1.0
±0.2
0.5max 1.0
10
0.5max
52.0 6.0
6.0
max
1.0
(Blue)
(White)
+5
0 +1
0 +5
0
+0.5
–1.0
±0.2
4.0
6.35
12.7
2.6max
27.5
16.0 (11.5)
max
4.2
12.7
1.0max
12.7
3.85 5.0
12.7
3.0max
12.5min
9.0
18.0
0
0.7
±0.5
±1.3 ±1.0
±1.0
±0.2
±0.5
±0.3
±2.0
±0.7
±0.2
±1.0
±0.5
±0.5
+1.0
–0.5
3.85 4.0
5.0
12.7
0.7
12.5min
11max
9.0
18.0
0
12.7
6.35
1.0max
18.0
±2.0
±0.2
±0.2
±0.5
±0.3
±0.7
±1.0
±1.3
+0.8
–0.2
+1.0
–0.5
+0.5
–0
0.7
5.0
5.0
2.75
19.8
16.5
11.0
4.0
3.0 12.7 3.85
12.7
0
1.5
22.2
9.0
12.5min
18.0
30°
±2.0
±0.2
±0.5
±0.3
±1.0
±1.0
±1.0
±0.5
±0.2
±0.3
±0.7
±1.0
+0.8
–0
+1.0
–0.5
+1.0
–0.5
ANODE
CATHODE
Part No., Lot No.,
Quantity
150max
45max
340max
Broken lines:
perforation
Part No., Lot No., Quantity
ANODE
CATHODE
340max
140max
55max
Broken lines:
perforation
77max
Trade
Mark
Part No., Lot No., Quantity
255max
120max
340
Core Flange
81
75 25
83
Part No., Lot No.,
Quantity
15
29
75
Fixture
±2
±2
±0.1
±2
±2
±1
±1
±2
Broken lines:
perforation
Part No., Lot No., Quantity
95max
255max
51max
10
Taping Specifications for Surface Mount
Taping Dimensions (mm)
Taping name Package Dimensions (mm) and Markings
Quantity
Taping Dimensions (mm)
Taping name Package Dimensions (mm) and Markings
Quantity
The suffix “VR”
is added to the
Part Number
The suffix “VR”
is added to the
Part Number
VR
VR
The suffix “VL”
is added to the
Part Number
VL
Taping Specifications for High-Voltage Diodes
The suffix “VD”
is added to the
Part Number
VD
The suffix “V1”
is added to the
Part Number
V1
Axial taping
Axial taping
The suffix “V”
is added to the
Part Number
V
Emboss taping Reel
(1) The cathode is the right side of the feeding direction.
(2) The diodes are put inside the case with the electrode side down.
(3) A 150 to 200mm leader tape is provided at the beginning of the tape.
(4) 10 or more holes are left empty at the beginning and the end of each tape.
(5) Taping of diodes with electrodes facing the direction is also available (taping name: VL)
1.5+0.1
–0
2.0±0.1
12.0±0.1 4.9max
0.4
±
0.1
10.8
±
0.1
21.05±0.1
13.9±0.1
4.0±0.1
3.0 max
11.5±0.1
24.0±0.3 1.75±0.1
4(6.0)
(2.0)
(40
º
)
(
120º
)
±0.5
(R130)
±1
100
330±2
31 max
25.5±0.5 2±0.5
2±0.5
13±0.5
R50±1
(R5)(R5)
Feeding direction
13
2.0
21
R1.0
178 14 2.0
65
Part No., Lot No.,
Quantity
±0.5
±0.5
±0.8
±2±1.5 ±0.5
4.5±0.2
2.0min
1.35±0.4 ±0.4
1.35
5.1+0.4
–0.1
2.6±0.2
2.05±0.2
±0.1
±0.1
+0.1
–0
4.0 2.0
3.1
2.6
12.0±0.3
±0.05
5.5 1.75±0.1
4.0
5.5
1.5
Feeding direction
0.05+0.1
–0.05
1.1
1.5
±0.2
±0.2
Part No.
Lot No.
Quantitiy
Taping name
(type)
Material
Disk part:
Cardboard
Axial core part:
Foaming polystyrole
4(6.0)
(2.0)
(40
°)
(120°)
R95±1
80±1
330±2
23max
17.5±0.5 2±0.5
2±0.5
13±1
R40
±0.5
±1
Feeding direction
Feeding direction
1.5 2.0±0.1
8.0±0.1 3.4 max
0.3
±0.1
6.8±0.1
13.5±0.1
10.6±0.1
4.0±0.1
1.6
7.5±0.1
16.0±0.3 1.75±0.1
+0.1
–0
+0.1
–0
3,000 pcs/reel
1,800 pcs/reel
3,000 pcs/reel
1,000 pcs/reel
5,000 pcs/reel
8,000 pcs/reel
Part No.
Quantity
Lot No.
29±1.5
75±1.5
340±2
25±1
6±1.0 6±1.0
5±0.5
58
1.0max
1.2max
±1
29±1.5
75±1.5
340±2
25±1
Part No.
Quantity
Lot No.
6±1.0 6±1.0
3.5±0.5
58
1.0max
1.0max
±1
LD Pack D Pack SFP