https://www.phoenixcontact.com/us/products/1923898
04/05/2021Page1/9
Feed-through header-MSTBA 2,5 HC/ 5-G-5,08-1923898
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
The figure shows a 10-position
version of the product
Your advantages
Well-known mounting principle allows worldwide use
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 50 pc
GTIN
GTIN 4017918599867
Weight per Piece (excluding packing) 2.150 g
Custom tariff number 85366930
Country of origin Germany
Technical data
Item properties
Brief article description Feed-through header
Plug-in system POWER COMBICON 2,5
Type of contact Male connector
Range of articles MSTBA 2,5 HC/..-G
Pitch 5.08 mm
Number of positions 5
https://www.phoenixcontact.com/us/products/1923898
04/05/2021Page2/9
Feed-through header-MSTBA 2,5 HC/ 5-G-5,08-1923898
Technical data
Item properties
Mounting type Wave soldering
Pin layout Linear pinning
Locking without
Number of levels 1
Number of connections 5
Number of potentials 5
Pin connector pattern alignment Standard
Electrical parameters
Nominal current 16 A
Nom. voltage 320 V
Rated voltage (III/3) 320 V
Rated voltage (III/2) 320 V
Rated voltage (II/2) 630 V
Rated surge voltage (III/3) 4 kV
Rated surge voltage (III/2) 4 kV
Rated surge voltage (II/2) 4 kV
Material data - contact
Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/
JEDEC JESD 201
Contact material Cu alloy
Surface characteristics Tin-plated
Metal surface contact area (top layer) Tin (3 - 5 µm Sn)
Metal surface contact area (middle layer) Nickel (1 - 3 µm Ni)
Metal surface soldering area (top layer) Tin (3 - 5 µm Sn)
Metal surface soldering area (middle layer) Nickel (1 - 3 µm Ni)
Material data - housing
Housing color green (6021)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN60695-2-12 850
Glow wire ignition temperature GWIT according to EN60695-2-13 775
Temperature for the ball pressure test according to EN60695-10-2 125 °C
Dimensions for the product
https://www.phoenixcontact.com/us/products/1923898
04/05/2021Page3/9
Feed-through header-MSTBA 2,5 HC/ 5-G-5,08-1923898
Technical data
Dimensions for the product
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung
im Download Center
Length [ l ] 12 mm
Width [ w ] 27.4 mm
Height [ h ] 12.1 mm
Pitch 5.08 mm
Height (without solder pin) 8.6 mm
Solder pin [P] 3.5 mm
Pin spacing 5.00 mm
Pin dimensions 1 x 1 mm
Dimensions for PCB design
Hole diameter 1.4 mm
Pin spacing 5.00 mm
Packaging information
Type of packaging packed in cardboard
Pieces per package 50
Denomination packing units Pcs.
General product information
Type of note Notes on operation
Note
In accordance with IEC 61984, COMBICON connectors have no switching
power (COC). During designated use, they must not be plugged in or
disconnected when carrying voltage or under load.
Ambient conditions
Ambient temperature (storage/transport) -40 °C ... 70 °C
Ambient temperature (assembly) -5 °C ... 100 °C
Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve)
Air clearances and creepage distances
Clearances and creepage distances IEC 60664-1:2007-04
Specification IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3) 3 mm
Minimum clearance - inhomogeneous field (III/2) 3 mm
Minimum clearance - inhomogeneous field (II/2) 3 mm
Minimum creepage distance value (III/3) 4 mm
Minimum creepage distance value (III/2) 1.6 mm
Minimum creepage distance value (II/2) 3.2 mm
Mechanical tests (A)
https://www.phoenixcontact.com/us/products/1923898
04/05/2021Page4/9
Feed-through header-MSTBA 2,5 HC/ 5-G-5,08-1923898
Technical data
Mechanical tests (A)
Test specification IEC 61984
Insertion strength per pos. approx. 6 N
Withdraw strength per pos. approx. 5 N
Polarization when inserted requirement >20 N Test passed
Contact holder in insert requirements >20 N Test passed
Durability tests (B)
Specification IEC 60512-9-1:2010-03
Contact resistance R10.9 mΩ
Insertion/withdrawal cycles 25
Contact resistance R21 mΩ
Impulse withstand voltage at sea level 4.8 kV
Thermal tests (C)
Specification IEC 60512-5-1:2002-02
Number of positions 12
Upper limiting temperature requirements <100 °C Test passed
Climatic tests (D)
Specification ISO 6988:1985-02
Cold stress -40 °C/2 h
Thermal stress 105 °C/168 h
Corrosive stress 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle
Impulse withstand voltage at sea level 4.8 kV
Power-frequency withstand voltage 2.21 kV
Environmental and durability tests (E)
Specification IEC 61984:2008-10
Result, degree of protection, IP code Finger safety with IP20 test finger
Vibration test
Specification IEC60068-2-6:2007-12
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Acceleration 5 g (60.1 - 150 Hz)
Test duration per axis 2.5 h
Standards and Regulations
Connection in acc. with standard EN-VDE
https://www.phoenixcontact.com/us/products/1923898
04/05/2021Page5/9
Feed-through header-MSTBA 2,5 HC/ 5-G-5,08-1923898
Technical data
Standards and Regulations
CUL
Flammability rating according to UL 94 V0
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Diagram
$
0 10 20 30 40 50 60 70 80 90 100 110
0
4
8
12
16
20
24
28
32
![°C]
I [A]
"
#
= 12-pos.
= 5-pos.
= 2-pos.
"
#
$
Type: FKC 2,5 HC/...-ST-5,08 with MSTBA 2,5 HC/...-G-5,08
Diagram
0 10 20 30 40 50 60 70 80 90 100 110
0
4
8
12
16
20
24
28
32
!
"
#
= 2-pos.
= 5-pos.
= 12-pos.
!
"
#
$[°C]
I [A]
Type: MVSTBR 2,5 HC/...-ST-5,08 with MSTBA 2,5 HC/...-G-5,08
Drilling diagram
a
2
1,4
5,08 3,54
Dimensional drawing
22
8,6
2
12
15
3,5
a
3,54
a+7,08
5,08
Classifications
eCl@ss
eCl@ss 10.0.1 27440402
eCl@ss 11.0 27460201
eCl@ss 4.0 27260700
eCl@ss 4.1 27260700
eCl@ss 5.0 27260700
eCl@ss 5.1 27260700
https://www.phoenixcontact.com/us/products/1923898
04/05/2021Page6/9
Feed-through header-MSTBA 2,5 HC/ 5-G-5,08-1923898
Classifications
eCl@ss
eCl@ss 6.0 27260700
eCl@ss 7.0 27440402
eCl@ss 9.0 27440402
ETIM
ETIM 3.0 EC001121
ETIM 4.0 EC002637
ETIM 6.0 EC002637
ETIM 7.0 EC002637
UNSPSC
UNSPSC 6.01 30211810
UNSPSC 7.0901 39121409
UNSPSC 11 39121409
UNSPSC 12.01 39121409
UNSPSC 13.2 39121409
UNSPSC 18.0 39121409
UNSPSC 19.0 39121409
UNSPSC 20.0 39121409
UNSPSC 21.0 39121409
Approvals
Approvals
Approvals
VDE Zeichengenehmigung / IECEE CB Scheme / EAC / cULus Recognized
Ex Approvals
Approval details
VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx 40050079
Nominal voltage UN 250 V
https://www.phoenixcontact.com/us/products/1923898
04/05/2021Page7/9
Feed-through header-MSTBA 2,5 HC/ 5-G-5,08-1923898
Approvals
Nominal current IN 16 A
IECEE CB Scheme http://www.iecee.org/ DE1-60988-B1B2
Nominal voltage UN 250 V
Nominal current IN 16 A
EAC B.01687
cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19931011
B D
Nominal voltage UN 300 V 300 V
Nominal current IN 16 A 10 A
Accessories
Accessories
Coding element
Coding section-CR-MSTB-1734401
Coding section, inserted into the recess in the header or the inverted plug, red insulating material
Filler plug
https://www.phoenixcontact.com/us/products/1923898
04/05/2021Page8/9
Feed-through header-MSTBA 2,5 HC/ 5-G-5,08-1923898
Accessories
Accessories-MSTB-BL-1755477
Keying cap, for forming sections, plugs onto header pin, green insulating material
Labeled terminal marker
Marker card-SK 5,08/3,8:FORTL.ZAHLEN-0804293
Marker card, Card, white, labeled, horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting
type: adhesive, for terminal block width: 5.08 mm, lettering field size: 5.08 x 3.8 mm
Additional products
Printed-circuit board connector-MSTB 2,5 HC/ 5-ST-5,08-1911994
PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 16 A (see derating curve), rated voltage
(III/2): 320 V, contact surface: Tin, type of contact: Female connector, Number of potentials: 5, Number of rows:
1, Number of positions per row: 5, number of connections: 5, product range: MSTB 2,5 HC/..-ST, pitch: 5.08 mm,
connection method: Screw connection with tension sleeve, Screw head form: L Slotted, conductor/PCB connection
direction: 0 °, Locking clip: - Locking clip, plug-in system: POWER COMBICON 2,5, Locking: without, Assembly: without,
type of packaging: packed in cardboard
Printed-circuit board connector-MVSTBR 2,5 HC/ 5-ST-5,08-1912430
PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 16 A (see derating curve), rated voltage
(III/2): 320 V, contact surface: Tin, type of contact: Female connector, Number of potentials: 5, Number of rows: 1,
Number of positions per row: 5, number of connections: 5, product range: MVSTBR 2,5 HC/..-ST, pitch: 5.08 mm,
connection method: Screw connection with tension sleeve, Screw head form: L Slotted, conductor/PCB connection
direction: 90 °, Locking clip: - Locking clip, plug-in system: POWER COMBICON 2,5, Locking: without, Assembly:
without, type of packaging: packed in cardboard
https://www.phoenixcontact.com/us/products/1923898
04/05/2021Page9/9
Feed-through header-MSTBA 2,5 HC/ 5-G-5,08-1923898
Accessories
Printed-circuit board connector-MVSTBW 2,5 HC/ 5-ST-5,08-1912870
PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 16 A (see derating curve), rated voltage
(III/2): 320 V, contact surface: Tin, type of contact: Female connector, Number of potentials: 5, Number of rows: 1,
Number of positions per row: 5, number of connections: 5, product range: MVSTBW 2,5 HC/..-ST, pitch: 5.08 mm,
connection method: Screw connection with tension sleeve, Screw head form: L Slotted, conductor/PCB connection
direction: -90 °, Locking clip: - Locking clip, plug-in system: POWER COMBICON 2,5, Locking: without, Assembly:
without, type of packaging: packed in cardboard
Printed-circuit board connector-FKC 2,5 HC/ 5-ST-5,08-1942400
PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 16 A, rated voltage (III/2): 320 V, contact
surface: Tin, type of contact: Female connector, Number of potentials: 5, Number of rows: 1, Number of positions per
row: 5, number of connections: 5, product range: FKC 2,5 HC/..-ST, pitch: 5.08 mm, connection method: Push-in spring
connection, conductor/PCB connection direction: 0 °, Locking clip: - Locking clip, plug-in system: POWER COMBICON
2,5, Locking: without, Assembly: without, type of packaging: packed in cardboard
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com