form XM3 D-sub connector SMT type 9 poles corresponding to the surface mounting, 25-pole D-sub connector * Since the surface of mounting type, it allows mounting of components to the substrate backside. * It can be mounted onto a precise substrate by positioning boss of the substrate. * Corresponding to the reflow mounting. Explanation of terms SMT SMT A, Surface Mount Technology stands for. Meaning of surface mount technology. Ratings / performance processing Material / Rated current 3A Rated voltage AC300V housing LCP (UL94 V-0) / black Contact resistance 25m or less (DC20mV, at 100mA or less) Insulation resistance More 1,000M (at DC500V) shell Steel / tin-plated Withstand voltage AC1,000V 1min (in the following leakage current 1mA) Fixture Copper alloy / nickel-plated Insertion and removal durability 200 times Hold down Copper alloy / tin plating Operating temperature limit - Copper alloy / gold-plated Contact the contact portions Terminal part Copper alloy / tin plating 55 ~ + 105 (no condensation or freezing) List plug shape accessories format No fasteners and mounting hole M3 Form XM3K- 12-02 No fasteners and mounting hole # 4-40 UNC Form XM3K- 12-03 Fixture Yes * M3 Form XM3K- 12-12 Fixture Yes * # 4-40 UNC Form XM3K- 12-13 socket shape accessories format No fasteners and mounting hole M3 Form XM3L- 12-02 Contact Us No fasteners and mounting hole # 4-40 UNC Form XM3L- 12-03 0120-919-066 Or direct dial phone Fixture Yes * M3 Form XM3L- 12-12 055-982-5015 Fixture Yes * # 4-40 UNC Form XM3L- 12-13 (Call charges apply.) 1 XM3 Format standard Form XM3 - - type the number of poles plated Specifications K: plug L: socket 09: 9-pole 1: gold-plated terminal shape specification of the fixture 2: L-shaped SMT terminal 02: No fixture 12: Yes fixture (Fixture screws M3) 13: (Mounting holes M3) 25:25 pole Yes fixture 03: None fixture (Fixture screws # 4-40 UNC) (Mounting holes # 4-40 UNC) form XM3 D-sub connector plug External dimensions (Unit: mm) Form XM3K- 12-02 fixture (No fastener-mounting holes M3) form Printed circuit board processing dimension Screw I DA 3.6 fixture A 2.8 3.95 In the case of no fixture CB Boad Edge HGE If there is a screw I (Tolerance 0.05) DF 2.8 6.95 0.6 12.1 11.7 (Fixture Yes * # 4-40 UNC) R0.95 1 8.9 6.1 6.4 12-13 F 8.7 XM3K- 12-12 (Yes fastener-M3) form XM3K- hole positioning boss 1.7 * 7.5 13.3 14.7 XM3K- 12-03 (No fastener-mounting holes # 4-40 UNC) form 1.4 Note. Pattern pitch tolerance of the substrate all over the body is 0.05. Please do not 12.6 8.3 cumulative. Since * 1.7 is a positioning boss hole, Be sure to design the by cormorants metal mask does not ride the solder in this part. E Fixture I Dimension Table format Number of poles (N) A B C D E G F H M3 Form XM3K-0912-03 # 4-40 No UNC Form XM3K-0912-12 09 31.0 16.8 25.0 10.96 8.22 2.74 18.8 20.2 M3 Yes Form XM3K-2512-02 M3 Form XM3K-2512-03 # 4-40 No UNC Form XM3K-2512-12 twenty five 53.0 38.9 47.0 33.12 30.36 2.76 40.8 42.2 None M3 Yes There # 4-40 UNC Form XM3K-2512-13 type ( mark of the model is a standard stock models.) No number of poles accessories fixture and mounting hole M3 9 twenty five No fasteners and mounting hole # 4-40 UNC Fixture Yes * M3 Fixture Yes * # 4-40 UNC minimum packaging unit (Individual) * form XM3K-0912-02 form XM3K-0912-03 form XM3K-0912-12 form XM3K-0912-13 32 form XM3K-2512-02 form XM3K-2512-03 form XM3K-2512-12 form XM3K-2512-13 20 * Packaging is the tray. 2 None There # 4-40 UNC Form XM3K-0912-13 Fixture I Form XM3K-0912-02 The latest product information, useful information www.fa.omron.co.jp/ XM3 form External dimensions (Unit: mm) I fixture Shape XM3L- 12-02 (no Printed circuit board processing dimension fastener-mounting holes M3) form (No fastener-mounting holes # 4-40 UNC) form DA 7.5 3.6 14.7 XM3L- 12-03. 13.3 Screw I hole positioning boss 1.7 * fixture XM3L- 12-12 (Yes fastener-M3) form XM3L- F R0.95 1 2.8 3.95 12.1 In the case of no fixture CB 6.95 A (Fixture Yes * # 4-40 UNC) 8.7 11.7 0.6 12-13 6.3 6.4 8.9 1.4 XM3 D-sub connector socket 2.8 Boad Edge HGE If there is a screw DF (Tolerance 0.05) Note. Pattern pitch tolerance of the substrate all 12.6 8 over the body is 0.05. Please do not cumulative. Since * 1.7 is a positioning boss hole, Be sure to design the by cormorants metal mask E does not ride the solder in this part. Dimension Table format Number of poles (N) A B C D E G F H M3 Form XM3L-0912-03 # 4-40 No UNC Form XM3L-0912-12 09 31.0 16.4 25.0 10.96 8.22 2.74 18.8 20.2 None M3 Yes There # 4-40 UNC Form XM3L-0912-13 Form XM3L-2512-02 M3 Form XM3L-2512-03 # 4-40 No UNC Form XM3L-2512-12 twenty five 53.0 38.5 47.0 33.12 30.36 2.76 40.8 42.2 None M3 Yes There # 4-40 UNC Form XM3L-2512-13 Fixture I Form XM3L-0912-02 type ( mark of the model is a standard stock models.) No fasteners and mounting mounting hole M3 9 twenty five hole # 4-40 UNC Fixture Yes * M3 Fixture Yes * # 4-40 UNC minimum packaging unit (Individual) * form XM3L-0912-02 form XM3L-0912-03 form XM3L-0912-12 form XM3L-0912-13 32 form XM3L-2512-02 form XM3L-2512-03 form XM3L-2512-12 form XM3L-2512-13 20 * Packaging is the tray. No number of poles accessories fixture and Contact Us 0120-919-066 Or direct dial phone 055-982-5015 (Call charges apply.) 3 Please use it correctly Precautions For soldering conditions In addition, the order to prevent the intrusion flux and solder to the mating portion of the connector, please go to automatic solder from the masking to the mating part in the tape. With - Reference reflow conditions respect to the masking tape, please use the appropriate Ma scan King tape by the customer. maximum temperature of 260 Time 20 to 40 seconds or less () peak temperature 260 soldering temperature 250 Preheat temperature 180 D-sub connector (SMT type) Board-mounted components masking (Seconds) Flow tank Preheating time Notes on operation 60-120 soldering time within20seconds to 40 seconds or less - mating work of the connector, plug and after confirming that there is no mating contact portions However, solder type, manufacturer, quantity and size of the substrate, it may vary depending on conditions extreme shift, tilt to the socket, again that we engaged cans. Please go securely to the back such as the other of the mounting member, on the implementation status of the check, please use. mating connector. There is a loss of cormorants possibility contact reliability to be used in a state that is not able to mating as far as it will go. For metal mask thickness at the time of the solder paste printing Metal mask thickness at the time of the solder paste printing, we recommend the 0.15 ~ Connector at the time of insertion and removal of, Do not give too much of the load again. 0.18mm. The connector may be damaged, and cause contact failure. Mating plug, again that will go However, solder type, manufacturer, quantity and size of the substrate, it may vary depending on conditions to the not pried as possible to the socket both. Deformation of the terminal and the such as the other of the mounting member, on the implementation status of the check, please use. housing, there is a risk of the housing cracking. For the pin deformation Connector to the mating contact part, please do not plugged the foreign matter such as the tip of the It causes a deformation and excessive load is applied to the terminal, since the solderability will be reduced at tweezers. Plating peeling, it will be the cause of terminal deformation. Connector Please do not mated the time of implementation, dropping or rough handling Saketekuda Sai products. In addition, the connector to the opposite direction. Connector will be damaged. insertion and removal of in a state that does not implement to the substrate Please do not. Cause terminal deformation. Notes on board mounting Please note the amount of warpage of the board. If the warp amount is large, there is a possibility that the After reflow, the case where the automatic solder bath perform the soldering Please perform the automatic solder from masking the positioning boss hole of the cause of the only bad soldering. substrate tape in order to prevent the flux rise. The connector for mounting to the end face For storage of the substrate, touch the solder side of the flow tank as in FIG. Therefore, if you use the (1) storage location Please consider the dust and moisture. (2) storage is in the vicinity of the gas flow tank, you need heat, rising on the flux measures. source, such as ammonia gas, sulfide gas please do not. Mounting of the fixture Form XM3K and form XM3L fixture 2 and 3 to the connector (form XM2Z, form XM4Z) can not be mounted. Price of the product described in this magazine, please contact dealings trading company. Please be sure to read the "consent matters" posted on the following URL when ordering. Compliance Requirements, we will explain the consent matter of when your order, such as warranty information. www.omron.co.jp/ecb/support/order Industrial Automation Business Company Inquiries about the product You can see the latest information of Omron control equipment. Customer Service Office quick 0120-919-066 www.fa.omron.co.jp Omron Please use also the purchase of emergency. Because not available in such as mobile phone * PHS * IP phone, please call to the telephone number below. phone 055-982-5015 (Call charges apply) Omron ordering of goods Hours: 8: 00 ~ 21: 00 business day: 365 days You can also contact us by FAX or Web page. FAX 055-982-5051 / www.fa.omron.co.jp Other inquiries Delivery time, price, sample specifications your business partners, or please consult with your company in charge of Omron sales representative. Omron control equipment dealers and Omron sales offices are, we will be guided through a Web page. Catalog number CDLJ-036A 2013 JuneSN W CSM_1_3_0814 COMRON Corporation 2013 are subject to changeAll and Rights refuseReserved. specifications without Please note