B-88 APEM www.apem.com
AV series
Anti-vandal and security pushbutton switches
Distinctive features
B
❑ Attractive, robust and durable
• Irremovable
•Anti-jamming construction : reduced travel to prevent insertion of foreign parts
•Contact and mechanism protected against crushing
•Fire resistant
• Long life
❑ Sealed versions
❑ Degree of protection (switches mounted on vertical panels,
as shown opposite) :
- standard version : IP54
- sealed version : IP65
EXAMPLES OF MOUNTING FOR SEALED VERSIONS
Preferred With boot U2187 (sect. H)
➞O-ring
Packaging unit : specified on the following pages.
Mounting accessories : Standard and special hardware are presented in section I.
APEM www.apem.com B-89
AV series
Anti-vandal and security pushbutton switches
Distinctive features
B
The AV series is a large range of security pushbutton switches including 4 product
families :
ANTI-VANDAL PUSHBUTTON SWITCHES (page B-90)
• Increased impact resistance provided
by a nut (Ø 19 mm) or mechanical stop
(Ø 22 mm)
• Stainless steel actuator and bushing
• Bushing dia. 19 (.748) or 22 mm (.866)
SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR (page B-93)
• Ergonomic actuator
dia. 20 (.787)
or 30 mm (1.181)
• Tactile feedback
• Up to 5A 250VAC
• Bushing dia. 22 mm (.866)
or 24 mm (.944)
OTHER SECURITY PUSHBUTTON SWITCHES (page B-96 )
• A large variety of
actuator shapes,
electrical functions,
connections, finish
and marking options
• Bushing dia. 16 (.629),
19 (.748) or 22 mm (.866)
SNAP-ACTION SECURITY PUSHBUTTON SWITCHES (page B-104)
• Tactile feedback
• Illuminated or non-illuminated
• Bushing dia. 19 mm (.748)
• Models with overmolded actuator
B-90 APEM www.apem.com
AV series
Anti-vandal pushbutton switches
Distinctive features and specifications
B
SPECIFICATIONS
•Max. current/voltage rating with resistive load (C contacts) : 2A 48 VDC
• Approved ratings of models with long case and A contacts (AV..000) :
UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles
• Initial contact resistance : 10 mΩmax. at 1A 2V
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
2.000 Vrms 50 Hz min. between terminals
•Electrical life : 10.000 cycles at full load
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Mechanical life : 1.000.000 cycles
• Packaging unit : 20 pieces (models Ø 22) or 40 pieces (models Ø 19)
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
or silver (A)
• Bushing : stainless steel
• Actuator : stainless steel
CUT-OUTS
• Panel cut-out :
Ø 19,2 mm (.755)
or Ø 22,2 mm (.874)
• Min. pitch for matrix mounting :
30 mm (1.181) x 30 mm (1.181)
ROBUSTNESS SEALING ( OPTION T )
Model Ø 19 mm (.748) Model Ø 22 mm (.866)
Impacts on actuator
according to
CECC 96000
Hammer radius 10 mm
0.3 Kg
34 cm
10 strokes
Striking energy:
1 joule (1Nm)
10 strokes
Striking energy:
5 joules (5Nm)
34 cm
1.5 Kg
Degree of protection
according to
EN 50102, June 95
(NFC 20-015) Hammer radius 25 mm Hammer radius 50 mm
IK08
Striking energy:
5 joules
(5Nm)
1.7 Kg
29.5 cm
IK10
Striking energy
:
20 joules
(20Nm)
5 Kg
40 cm
❑ Increased impact resistance provided by a nut
or mechanical stop
❑ Stainless steel actuator and bushing
❑ UL-CSA approved (long case only)
➀internal gasket ➁external gasket
Front panel sealing (IP65)
1
2
APEM www.apem.com B-91
AV series
Anti-vandal pushbutton switches
Bushing Ø 19 (.748) - momentary (NO)
B
NO
(function 3)
Short case - flat actuator - AV09100...40N Hex nut 22 (.866) across flats
7.30
(.287)
2.00
(.078) (.374)
9.50 6.50
(.255) (.118)
3.00
ø19.00x1.00 SI
(.748DIAx1.00 IS)
3.00
(.118)
(.866DIA)
ø22.00
ø15.00
(.590DIA)
(.866DIA)
ø22.00
(.196)
5.00
EPOXY
2.80x0.5
(.110x.019)
1.20
(.047)
2.80
(.110)
Screw terminals
AV091003C940N
Solder lug /
quick-connect term.
AV091003C240N
ORDER FORMAT
Series Bush./act.
config. Case
style Function Contact
material Terminal
type Bush./act.
material Sealing
AV
09
19
9D
100
000
3
9
2
C
A
40
N
T
Long case - flat actuator - UL-CSA approved - AV09000...40N Hex nut 22 (.866) across flats
6.50
(.255) (.283)
7.20
(.456)
11.60
(.196)
5.00
2.00
(.078)
Ø22.00
(.866DIA)
Ø19.00x1.00 SI
3.00
Ø22.00
Ø15.00
(.866DIA)
(.590DIA)
(.748DIAx1.00 IS)
(.118)
Screw terminals
AV090003A940N
Curved actuator
Screw terminals
AV19•003C940N
Solder lug / quick-connect terminals
AV19•003C240N
Flush model
Screw terminals
AV9D•003C940N
Solder lug / quick-connect terminals
AV9D•003C240N
OTHER CONFIGURATIONS
BASIC MODEL
(.078)
(.590DIA)
(.866DIA)
2.00
Ø15.00
Ø22.00
(.141)
3.60
(.866DIA)
Ø22.00
(.047)
1.20
To order a sealed product, replace N
with T at the end of P/N.
Case style : replace • with 1for short case and 0for long case.
New!
Screw terminals for wires 1,5 mm2max.
Screw terminals for wires 1,5 mm2max.
B-92 APEM www.apem.com
AV series
Anti-vandal pushbutton switches
Bushing Ø 22 (.866) - momentary (NO)
B
Long case - flat actuator - UL-CSA approved - AV03000...40N
Short case - flat actuator - AV03100...40N Hex nut 25 (.984) across flats
ø22.00x1.00 SI
(.866DIAx1.00 IS)
5.00
(.196)
6.30
(.248)
(.500)
12.70
3.00
(.118)
(.078)
2.00
ø15.00
(.59DIA)
ø25.00
(.984DIA)
EPOXY
2.80x0.5
(.110x.019)
(.110)
2.80
(.287)
7.30
(.047)
1.20
Screw terminals
AV031003C940N
Solder lug /
quick-connect term.
AV031003C240N
Screw terminals
AV030003A940N
Hex nut 25 (.984) across flats
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
5.00
(.196)
10.00
(.248)
(.590)
15.00
3.00
(.118)
(.078)
2.00
Ø15.00
(.59DIA)
Ø25.00
(.984DIA)
Curved actuator
Screw terminals
AV02•003C940N
Solder lug / quick-connect term.
AV02•003C240N
Flatted bushing
Flat actuator
Screw terminals
AVM3•003C940N
Curved actuator
Screw terminals
AVM2•003C940N
OTHER CONFIGURATIONS
3.60
(.141)
(.078)
2.00
Ø15.00
(.590DIA)
Ø25.00
(.984DIA)
(.984DIA)
Ø25.00
(.590DIA)
Ø15.00
(.393
10.00
Ø22.20
(.874DIA)
)
NO
(function 3)
ORDER FORMAT
Series Bush./act.
config. Case
style Function Contact
material Terminal
type Bush./act.
material Sealing
AV
03
02
M3
M2
100
000
3 C
9
2
C
A
40
N
T
BASIC MODEL
To order a sealed product, replace N
with T at the end of P/N.
Case style : replace • with 1for short case and 0for long case.
New!
Screw terminals for wires 1,5 mm2max.
Screw terminals for wires 1,5 mm2max.
APEM www.apem.com B-93
AV series
Security pushbutton switches with large actuator
Bushing Ø 22 (.866) - momentary (combined NC/NO)
B
Combined NC/NO
Recessed actuator
AV22LC402
Curved actuator
AV22LB402
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 5A 250VAC
• Initial contact resistance : 100 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
•Electrical life : 1.000.000 cycles at 1A 250VAC
50.000 cycles at full load
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Mechanical life : 3.000.000 cycles
• Front panel sealing : IP65
• Packaging unit : 20 pieces (except black chrome plated : 16 pieces)
MATERIALS
• Case : polyester, glass filled
• Contacts : silver/nickel alloy
• Bushing : stainless steel (std)
• Actuator : stainless steel (std)
CUT-OUT
• Panel cut-out : Ø 22,2 (.874)
or Ø 24,2 (.952)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
ORDER FORMAT
Series Bushing
diameter Bush./act.
config. Actuator
style Bush./act.
matl Contact/
terminals
AV 22
P
B
C
2
4
See next page.
L40
Flat actuator - solder lug terminals - AV22LP Hex nut 25 (.984) across flats
(.118)
3.00
4.00
(.157)
0.50
(.019)
(1.023DIA)
Ø26.00
(.787DIA)
Ø20.00
29.00
(1.142)
(.492)
12.50
Ø22.00x1.00 SI
(.094)
(.055)
1.40
(.866DIAx1.00 IS)
2.40
AV22LP402
BASIC MODEL
OTHER CONFIGURATIONS
All model numbers below are for switches with standard bushing/actuator material.
➞O-ring
B-94 APEM www.apem.com
AV series
Security pushbutton switches with large actuator
Bushing Ø 24 (.944) - low profile - momentary (combined NC/NO)
B
4
Curved actuator
AV24LB402
Recessed actuator
AV24LC402
Flat actuator - solder lug terminals - AV24LP Hex nut 27 (1.062) across flats
(1.213)
Ø20.00
(.787DIA)
(1.181DIA)
(.051)
1.30 (.157)
4.00
Ø30.00
(.559)
14.20
30.80
(.944DIAx1.00 IS)
Ø24.00x1.00 SI
0.50
(.019)
1.40
(.055)
(.094)
2.40
AV24LP402
BASIC MODEL
OTHER CONFIGURATIONS
Models with non-anodized actuator
CODE BUSHING ACTUATOR
40 (standard) Stainless steel Stainless steel
20 Chrome plated brass Chrome plated brass
Models with anodized actuator
CODE BUSHING ACTUATOR COLOUR
1•Black chrome plated brass
2•Chrome plated brass
4• Stainless steel
2 (standard) NC/NO, solder lug terminals
4NC/NO, quick-connect terminals
BUSHING/ACTUATOR MATERIAL
CONTACT / TERMINALS
For non-standard material, replace 40 with one of the following codes.
➞O-ring
ø1.40
(.055 DIA)
(.110)
2.80
Replace • with one of the following codes :
1: blue - 2: black - 3: pale green - 3F : dark green - 4: natural - 5: gold yellow
6: red - 6B : maroon
APEM www.apem.com B-95
AV series
Mushroom head security pushbutton switches
Bushing Ø 22 (.866) - momentary (combined NC/NO)
B
4
Combined NC/NO
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 5A 250VAC
• Initial contact resistance : 100 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
•Electrical life : 1.000.000 cycles at 1A 250VAC
50.000 cycles at full load
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Mechanical life : 1.000.000 cycles
• Front panel sealing : IP65
• Packaging unit : 16 pieces
MATERIALS
• Case : polyester, glass filled
• Contacts : silver/nickel alloy
• Bushing : brass, nickel plated
•
Actuator : aluminium, anodized
CUT-OUT
• Panel cut-out : Ø 22,2 (.874)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
ORDER FORMAT
Series Bushing
diameter Bush./act.
config. Actuator
colour Contact/
terminals
AV 22
see
below 2
4
PNA
Solder lug terminals - red actuator - AV22PNA Hex nut 25 (.984) across flats
(O-ring)
ø30.00
10.80
(.425)
(1.181DIA)
4.00
(.157)
(.866DIAx1.00 IS)
(.019)
0.50
ø22.00x1.00 SI
(.334)
Joint
25.00
(.984)
8.50
(.094)
2.40
(.055)
1.40
AV22PNA62
BASIC MODEL
1:blue - 2:black - 3 : pale green - 3F :dark green - 4 : natural - 5: gold yellow - 6: red - 6B :maroon
ACTUATOR ANODIZATION COLOUR
2 (standard) NC/NO, solder lug terminals
4NC/NO, quick-connect terminals
CONTACT / TERMINALS
ø1.40
(.055 DIA)
(.110)
2.80
B-96 APEM www.apem.com
AV series
Security pushbutton switches
Bushing Ø 16 (.629) - momentary (NO)
B
Curved actuator w. chamfer
AV0830C900
Curved actuator
AV1630C900
3.00
1.50
(.059)
(.118)
NO
(function 3)
SPECIFICATIONS
•Max. current/voltage rating with resistive load :
200mA 48 VDC - 100mA 48VDC
• Initial contact resistance : 50 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
•Electrical life : 50.000 cycles at 200mA 48VDC
100.000 cycles at 100mA 48VDC
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Mechanical life : 1.000.000 cycles
• Packaging unit : 60 pieces
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
• Bushing and actuator : nickel
plated brass (std)
CUT-OUT
• Panel cut-out :
Ø 16,2 (.637)
• Min. pitch for matrix mounting :
24 mm x 24 mm (.944 x .944)
ORDER FORMAT
Series Bush./act.
config. Function Case
style Contact
matl. Term.
type Bush./act.
material
See ”options” page.
K
Sealing
AV
06
16
08
3 0 C 9 00
Flat actuator - screw terminals - AV06 Hex nut 19 (.748) across flats
(.708DIA)
ø18.00
(.374)
9.50
1.50
(.059)
ø12.00
(.472DIA)
(.440)
11.20
(.118)
3.00 (.118)
3.00
(.629DIAX1.00 IS)
ø16.00X1.00 SI
AV0630C900
BASIC MODEL
OTHER CONFIGURATIONS
(.059)
1.50
(.078)
2.00
All model numbers below are for switches with standard bushing/actuator material, without marking.
Screw terminals for wires 1,5 mm2max.
APEM www.apem.com B-97
AV series
Security pushbutton switches
Bushing Ø 16 (.629) - latching action
B
New!
Quick-connect terminals
Flat actuator Curved actuator
AV0611A800 AV1611A800
Straight PC terminals
Flat actuator Curved actuator
AV0611A400 AV1611A400
5.08
(.200)
0.50
(.019)
1.10
(.043)
EPOXY
3.50
(.137)
SPECIFICATIONS
•Max. current/voltage rating with resistive load :1,5A 250VAC - 1A 24VDC
• Initial contact resistance : 50mΩmax.
•Insulation resistance : 1 GΩmin. at 500VDC
• Dielectric strength : 1.500 Vrms 50 Hz min. between terminals
1 000 Vrms 50 Hz between terminals and frame
•Electrical life : 100.000 cycles at 1,5A 250VAC
40.000 cycles at 1A 24VDC
•Torque : 5 Nm min. - 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Mechanical life : 200.000 cycles
• Packaging unit : 25 pieces
OFF ON
MATERIALS
• Case : PA-6T, UL94-V0
• Contacts : silver (A)
Gold plated silver (AD) on request.
• Bushing and actuator : nickel
plated brass (std)
CUT-OUT
• Panel cut-out : Ø 16,2 (.637)
• Min. pitch for matrix mounting :
24 mm x 24 mm (.944 x .944)
ORDER FORMAT
Series Bush./act.
config. Function Case
style Contact
matl. Term.
type Bush./act.
material
See ”options” page.
K
Sealing
AV
06
16 4
2
8
1 1 A 00
Solder lug terminals - AV..11A200 Hex nut 19 (.748) across flats
Ø12.00
(.472DIA)
Ø18.00
(.708DIA)
3.40
(.133)
1.50
(.059) 9.00
(.354) 15.20
(.598)
1.40
(.055)
2.30
(.090)
3.00
(.118)
3.00
(.118)
Ø16.00X1.00 SI
(.629DIAX1.00 IS)
Ø18.00
(.708DIA)
Ø12.00
(.472DIA)
EPOXY
Flat actuator
AV0611A200 OFF - ON
Curved actuator
AV1611A200 OFF - ON
BASIC MODEL
OTHER CONFIGURATIONS
2.80
(.047)
1.20
(.047)
2.40
(.094)
0.50
(.019)
8.00
(.314)
EPOXY
All model numbers below are for switches with standard bushing/actuator material, without marking.
B-98 APEM www.apem.com
AV series
Security pushbutton switches
Bushing Ø 19 (.748) - momentary (combined NC/NO)
B
Solder lug terminals - AV19..007
4213
Ø19.00X1.00 SI
(.748DIAX1.00 IS)
12.60
(.496) 3.60
(.141)
13.10
(.515)
Ø22.00
(.866DIA)
Ø15.00
(.590)
2.00
(.078)
3.60
(.141)
1.50
(.059)
0.50
(.019)
2.00
(.078)
Ø15.00
(.590)
Ø22.00
(.866DIA)
SPECIFICATIONS
•Max. current/voltage rating with resistive load :
5A 250VAC - 5A 125VAC - 6.000 cycles
5A 15VDC - 3A 30VDC - 50.000 cycles
• Initial contact resistance : 100 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between term. and frame
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 9 mm (.354) max.
• Operating temperature : -20°C to +85°C
• Mechanical life : 1.000.000 cycles
• Front panel sealing : IP65
• Packaging unit : 20 pieces
Combined NC/NO
4213
ORDER FORMAT
Series Bushing
diameter Bush./act.
config. Actuator
style Bush./act.
matl Contact/
terminals
AV 19
P
B
See below
L00 7
MATERIALS
• Case : PA 6/6
• Contacts : silver
• Bushing : nickel pl. brass (std)
• Actuator : nickel pl. brass (std)
CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
Hex nut 22 (.866) across flats
Flat actuator
AV19LP007
Curved actuator
AV19LB007
BASIC MODEL
All model numbers below are for switches with standard bushing/actuator material.
➞O-ring
CODE BUSHING ACTUATOR
00 (std) Nickel plated brass Nickel plated brass
20 Chrome plated brass Chrome plated brass
40 Stainless steel Stainless steel
BUSHING/ACTUATOR MATERIAL For non-standard material, replace 00 with one of the following codes.
New!
APEM www.apem.com B-99
AV series
Security pushbutton switches
Bushing Ø 19 (.748) - momentary (NO)
B
NO
(function 3)
Short case - flat actuator - AV09100...00 Hex nut 22 (.866) across flats
(.748DIAx1.00 IS)
(.531)
ø22.00
(.590DIA)
(.866DIA)
ø15.00
(.078)
2.00
(.216)
5.50
13.50 (.196)
5.00
(.118)
3.00
ø19.00x1.00 SI
EPOXY
2.80x0.5
(.110x.019)
1.20
(.047)
2.80
(.110)
7.30
(.287)
SPECIFICATIONS
•Max. current/voltage rating with resistive load (C contacts): 2A 48 VDC
• Approved ratings of models with long case and A contacts (AV..000) :
UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles
• Initial contact resistance : 10 mΩmax. at 1A 2V
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
2.000 Vrms 50 Hz min. between terminals
•Electrical life : 10.000 cycles at full load
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Mechanical life : 1.000.000 cycles
• Packaging unit : 40 pieces
Screw terminals
AV091003C900
Solder lug /
quick-connect term.
AV091003C200
Long case - flat actuator - UL-CSA approved - AV09000...00
(.413)
10.50
(.582)
14.80
(.196)
5.00
2.00
(.078)
Ø19.00x1.00 SI
3.00
Ø22.00
Ø15.00
(.866DIA)
(.590DIA)
(.748DIAx1.00 IS)
(.118)
Screw terminals
AV090003A900
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
or silver (A)
• Bushing : brass, nickel plated (std)
•
Actuator : brass, nickel plated (std)
CUT-OUT
• Panel cut-out :
Ø 19,2 mm (.755)
• Min. pitch for matrix mounting :
30 mm (1.181) x 30 mm (1.181)
ORDER FORMAT
Series Bush./act.
config. Case
style Function Contact
matl. Term.
type Bush./act.
material
See ”options” page.
Marking Sealing
AV
09
19
9P
9B
100
000
3 C
9
2KC
A
00
BASIC MODEL
All model numbers below are for switches with standard bushing/actuator material, without marking.
Hex nut 22 (.866) across flats
New!
Screw terminals for wires 1,5 mm2max.
Screw terminals for wires 1,5 mm2max.
B-100 APEM www.apem.com
AV series
Security pushbutton switches
Bushing Ø 19 (.748) - momentary (NO)
AV series
Security pushbutton switches
Bushing Ø 19 (.748) - other electrical functions
B
OTHER CONFIGURATIONS
Curved actuator
Screw terminals
AV19•003C900
Solder lug / quick-connect terminals
AV19•003C200
With knurled nut for matrix mounting 25 (.984) x 25 (.984)
Flat actuator, screw term. Curved actuator, screw term.
AV9P•003C900 AV9B•003C900
Flat actuator, solder lug term. Curved act., solder lug term.
AV9P•003C200 AV9B•003C200
Wrench available
under P/N U1929.
Ø15.00
(.590DIA)
Ø22.00
Ø15.00
(.866DIA)
(.590DIA)
(.177)
4.50
(.866DIA)
Ø22.00
25.00
25.00 25.00
(.984)
(.984)
(.984)
4.50
(.177)
(.078)
(.590DIA)
(.866DIA)
2.00
Ø15.00
Ø22.00
(.141)
3.60
Case style : replace • with 1for short case and 0for long case.
Bushing Ø 19 (748) - combined NC/NO - AV..9035
(.590DIA)
Ø15.00
Ø22.00
Ø15.00
(.866DIA)
(.590DIA)
Ø19.00x1.00 SI
(.748DIAx1.00 IS)
2.00
(.078) 3.00
(.118)
15.00
(.590)
7.50
(.295) 5.20
(.204)
(.141)
3.60
(.200)
5.08
(.078x.015)
2.00x0.40
(.031)
0.80
(.047)
1.20
Hex nut 22 (.866) across flats
• Single pole, solder lug terminals
• Gold plated silver contacts
•Current/voltage rating with resistive load :
max. : 1A 30V - min : 10µA 5V
Note : a current above 100mA damages the gold plating.
• Dielectric strength : 1.000 Vrms between terminals
2.000 Vrms between terminals and frame
•Electrical life : 250.000 cycles at full load
• Mechanical life : 1.000.000 cycles
• Packaging unit : 20 pieces
• Further specifications : see previous page.
Flat actuator Curved actuator
AV099035D200 AV199035D200
Bushing/actuator materials, marking and sealing : see ”options” page.
APEM www.apem.com B-101
AV series
Security pushbutton switches
Bushing Ø 22 (.866) - momentary (NO)
B
Short case - flat actuator - AV03100...00 Hex nut 25 (.984) across flats
ø22.00x1.00 SI
(.866DIAx1.00 IS)
5.00
(.196)
6.30
(.248)
(.500)
12.70
3.00
(.118)
(.078)
2.00
ø15.00
(.59DIA)
ø25.00
(.984DIA)
EPOXY
2.80x0.5
(.110x.019)
(.110)
2.80
(.287)
7.30
(.047)
1.20
Screw terminals
AV031003C900
Solder lug /
quick-connect term.
AV031003C200
Long case - flat actuator - UL-CSA approved - AV03000...00 Hex nut 25 (.984) across flats
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
5.00
(.196)
10.00
(.248)
(.590)
15.00
3.00
(.118)
(.078)
2.00
Ø15.00
(.59DIA)
Ø25.00
(.984DIA)
Screw terminals
AV030003A900
NO
(function 3)
SPECIFICATIONS
•Max. current/voltage rating with resistive load (C contacts): 2A 48 VDC
• Approved ratings of models with long case and A contacts (AV..000) :
UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles
• Initial contact resistance : 10 mΩmax. at 1A 2V
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
2.000 Vrms 50 Hz min. between terminals
•Electrical life : 10.000 cycles at full load
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Mechanical life : 1.000.000 cycles
• Packaging unit : 20 pieces
MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
or silver (A)
• Bushing : brass, nickel plated (std)
•
Actuator : brass, nickel plated (std)
CUT-OUTS
• Panel cut-out :
Ø 22,2 mm (.874)
• Min. pitch for matrix mounting :
30 mm (1.181) x 30 mm (1.181)
ORDER FORMAT
Series Bush./act.
config. Case
style Function Contact
matl. Term.
type Bush./act.
material Marking
AV
Sealing
03
02
M3
M2
100
000
3 C
9
2KC
A
00
BASIC MODEL
All model numbers below are for switches with standard bushing/actuator material, without marking.
See ”options” page.
New!
Screw terminals for wires 1,5 mm2max.
Screw terminals for wires 1,5 mm2max.
B-102 APEM www.apem.com
AV series
Security pushbutton switches
Bushing Ø 22 (.866) - momentary (NO)
AV series
Security pushbutton switches
Bushing Ø 22 (.866) - other electrical functions
B
Curved actuator
Screw terminals
AV02•003C900
Solder lug / quick-connect terminals
AV02•003C200
3.60
(.141)
(.078)
2.00
Ø15.00
(.590DIA)
Ø25.00
(.984DIA)
OTHER CONFIGURATIONS
Flatted bushing
Flat actuator
Screw terminals
AVM3•003C900
Curved actuator
Screw terminals
AVM2•003C900
(.984DIA)
Ø25.00
(.590DIA)
Ø15.00
(.393
10.00
Ø22.20
(.874DIA)
)
Case style : replace • with 1for short case and 0for long case.
Bushing Ø 22 (.866) - Normally closed (NC) - AV..1200
Bushing Ø 22 (.866) - alternate action - AV..4700
• Single pole, screw terminals, without marking
•Silver plated copper contacts (C)
• Max. current/voltage rating with resistive load :
2A 250VAC - 3A 125VAC - 2,5A 24VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. betw. term. and frame
2.000 Vrms. 50 Hz min. between terminals
•Electrical life : 100.000 cycles at 0,3A 24VAC or DC
10.000 cycles at full load
• Packaging unit : 20 pieces
Flat actuator Curved actuator
AV031202C00 AV021202C00
• Double pole, solder lug/quick-connect term., curved actuator
•Silver contacts
• Max. current/voltage rating with resistive load :
3(1,5)A 250VAC - 6A 125VAC - 3A 24VAC or DC
• Dielectric strength :
3.000 Vrms min. between terminals and frame
•Electrical life : 10.000 cycles at full load
50.000 cycles at 1A 24VAC or DC
• Mechanical life : 100.000 cycles
• Packaging unit : 10 pieces
AV044746A200
ON - ON
(.984DIA)
Ø25.00
Ø15.00
(.59DIA)
7.00
(.275)
15.40
(.606)(.551)(.141)
14.003.60
(.59DIA)
Ø15.00
2.00
(.078) (.118)
3.00
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
(.118DIAx.0.50)
Ø3.00x0.50
13.20
(.519)
Hex nut 25 (.984) across flats
Hex nut 25 (.984) across flats
Ø25.00
(.984DIA)
(.551)
(.141) 14.00
3.60
(.59DIA)
Ø15.00
1.60
(.063) (.118)
3.00
Ø22.00x1.00 SI
(.866DIAx1.00 IS)
(.811)
20.60 7.20
(.283)
5.80
(.228)
8.40
(.330)
0.50x2.80
(.019x.110)
Further specifications : see previous page. Bushing/actuator materials, marking and sealing : see ”options” on next page.
APEM www.apem.com B-103
AV series
Security pushbutton switches
Options
B
Flat or curved metal actuator ** Option 80 not available on models with dia. 16 mm (.629) bushing
CODE BUSHING ACTUATOR
00 (standard) Nickel plated brass Nickel plated brass
10 Nickel plated brass Stainless steel
12 Nickel plated brass Chrome plated brass
20 Chrome plated brass Chrome plated brass
30 Chrome plated brass Stainless steel
40 Stainless steel Stainless steel
80 ** Varnished polished brass Varnished polished brass
Flat thermoplastic actuator (not available with dia. 16 mm (.629) bushing)
CODE BUSHING ACTUATOR COLOUR
0•(standard) Nickel plated brass
2•Chrome plated brass
8• Varnished polished brass
BUSHING/ACTUATOR MATERIAL
Replace • with one of the following codes.
1: blue - 2: black - 3: green - 4: grey
5: yellow - 6: red - 7/1: white - 9: orange
For flat or curved actuator.
Not available on model AV031202C00.
- by engraving on brass actuator
(stainless steel on request)
- by hot stamping on thermoplastic
actuator.
COLOUR OF MARKING
CODE COLOUR
Brass actuator
0 (standard) Same as finish
2Black
Note : a finished product supplied in
version “0” cannot be modified to
version "2".
Thermoplastic actuator
2Black
7White
TYPE OF MARKING
CODE TYPE
0 to 9 Numbers 0 to 9
XSymbol *
YSymbol #
A to N Letters A to N
P to W Letters P to W
0Letter O
Letter O : same code and same design as
number 0.
For special symbols, consult factory.
Minimum order : 500 pieces
(0.059)
1.50
(0.314)
8.00
(0.590DIA)
Ø15.00
MARKING Select an option from each of the two tables below.
For non-standard material, replace 00 with one of the following codes.
After selecting basic model number,
fill in last 3 boxes
with desired options.
Series Bush./act.
config. Case
style Function Contact
matl. Term.
type Bush./act.
material Marking Sealing
AV
KFront panel sealing (IP65)
1
2
1
2
SEALING
➀elastomeric membrane
➁external gasket
➀internal gasket
➁external gasket
Blank No sealing
For types with bushing Ø 19 or Ø 22
KFrontal panel sealing (IP65)
For types with bushing Ø 16
B-104 APEM www.apem.com
AV series
Snap-action security pushbutton switches
Bushing Ø 19 (.748) - illuminated or not - momentary (NO)
B
Flat actuator - illuminated
Solder lug terminals
AV09C7L3D200
Screw terminals
AV09C7L3D900
NO
(function 3)
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA
Other colours : 2V (3V max.) 10mA
A resistor must be series-connected by the user.**
• Initial contact resistance : 100 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between terminals and bushing
•Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N +/-2N
• Travel : 0,7 mm (.027) +/- 0,1 mm (.003)
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Soldering : 270°C max. during 3 sec.
• Packaging unit : 40 pieces
** Resistor value = supply voltage - LED forward voltage
LED forward current
Flat actuator - non-illuminated Hex nut 22 (.866) across flats
Solder lug terminals
AV09C703D200
Screw terminals
AV09C703D900
Also available with curved actuator :
AV19C703D200 or AV19C703D900
MATERIALS
• Case : PBT UL94-V0
• Terminals : brass, gold plated
• Contacts : gold plated dome
• Bushing : brass, nickel plated (std)
•
Actuator : brass, nickel plated (std)
• LED
CUT-OUTS
• Panel cut-out :
Ø 19,2 mm (.755)
•
Min. pitch for matrix mounting :
30 mm (1.181) x 30 mm (1.181)
(.074)
1.90
(.153)
3.90
(.043)
1.10
Ø19.00x1.00 SI
3.00
Ø22.00
Ø15.00
2.00
13.50
(.866DIA)
(.590DIA)
(.748DIAx1.00 IS)
(.118)
(.078)
(.531)
(.163)
4.15
(.590DIA)
(.866DIA)
Ø15.00
Ø22.00
EPOXY
(.519)
13.20
13.50
(.531)
(.078)
2.00
(.531)
(.078) (.118)
(.748DIAx1.00 IS)
(.590DIA)
(.866DIA)
13.50
2.00
Ø15.00
Ø22.00
3.00
Ø19.00x1.00 SI
1.10
(.043)
3.90
(.153)
4.15
(.163)
1.90
(.074)
(.393DIA)
Ø10.00
EPOXY
(.590DIA)
(.866DIA)
Ø15.00
Ø22.00
(.078)
2.00
(.519)
13.20
13.50
(.531)
ORDER FORMAT
Series Bush./act.
config. Case
style Funct.Illum.
or not Contact
matl. Term.
type Bush./act.
material MarkingLED
colour Seal.
AV 00
09
19 L
02
9
C7 3 D 2
K
See ”options” on next page.
All model numbers below are for switches
with standard bushing/actuator material,
without marking.
Hex nut 22 (.866) across flats
+-
APEM www.apem.com B-105
AV series
Snap-action security pushbutton switches
Options
B
Non-illuminated models
CODE BUSHING ACTUATOR
00 (std) Nickel plated brass Nickel plated brass
10 Nickel plated brass Stainless steel
30 Chrome plated brass Stainless steel
40 Stainless steel Stainless steel
80
Varnished polished brass Varnished polished brass
Illuminated models
CODE BUSHING ACTUATOR
00 (std) Nickel plated brass Nickel plated brass
20 Chrome plated brass Chrome plated brass
40 Stainless steel Stainless steel
45 Stainless steel Nickel plated brass
80
Varnished polished brass Varnished polished brass
Blank No LED
1: Blue - 3: Green - 5: Yellow - 6: Red - 7 : White - 9 : Amber - 2 : Red/green
KFront panel sealing (IP65)
1
2
➀internal gasket
➁external gasket
BUSHING/ACTUATOR MATERIAL
LED COLOUR
For non-standard material, replace 00 with one of the following codes.
Series Bush./act.
config. Case
style Funct.Illum.
or not Contact
matl. Term.
type Bush./act.
material MarkingLED
colour Seal.
AV
For flat or curved actuator.
- by engraving on non-illuminated
brass actuator
(stainless steel on request).
- by hot stamping on thermoplastic
insert ( illuminated actuators)
COLOUR OF MARKING
CODE COLOUR
Non-illuminated actuators
0 (standard) Same as finish
2Black
Note : a finished product supplied in
version “0” cannot be modified to
version "2".
Illuminated actuators
2Black (on white)
TYPE OF MARKING
CODE TYPE
0 to 9 Numbers 0 to 9
XSymbol *
YSymbol #
A to N Letters A to N
P to W Letters P to W
0Letter O
Letter O : same code and same design as
number 0.
For special symbols, consult factory.
Minimum order : 500 pieces
(0.059)
1.50
(0.314)
8.00
Ø10.00
(0.393DIA)
(0.039)
1.00
MARKING Select an option from each of the two tables below.
SEALING
Blank No sealing
After selecting basic model no.,
fill in last 4 boxes
with desired options.
B-106 APEM www.apem.com
AV series
Snap-action security pushbuttons with overmolded actuator
Bushing Ø 19 (.748) - illuminated or not - momentary (NO)
B
New!
SPECIFICATIONS
•Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA
Other colours : 2V (3V max.) 10mA
A resistor must be series-connected by the user.**
• Initial contact resistance : 100 mΩmax.
•Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between terminals and bushing
•Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N +/-2N
• Travel : 0,7 mm (.027) +/- 0,1 mm (.003)
•Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Soldering : 270°C max. during 3 sec.
• Packaging unit : 40 pieces
** Resistor value = supply voltage - LED forward voltage
LED forward current
MATERIALS
• Case : PBT UL94-V0
• Terminals : brass, gold plated
• Contacts : gold plated dome
• Bushing : brass, nickel plated (std)
•
Actuator : stainless steel, with
thermoplastic overmolding
• LED
CUT-OUTS
• Panel cut-out : Ø 19,2 mm (.755)
•
Min. pitch for matrix mounting :
30 mm (1.181) x 30 mm (1.181)
NO
(function 3)
ORDER FORMAT
Series Bush./act.
config. Illum.
or not Contact
matl. Term.
type Bush.
material Actuator
style
LED
colour Seal.
AV 90
S0
SL 2
4
D
Over-
molding
K
See ”options” on next page.
Solder lug terminals Hex nut 22 (.866) across flats
(.385)
(.078)
(.118)
(.590DIA)
(.866DIA)
9.80
2.00
Ø15.00
Ø22.00
3.00
1.10
(.043)
4.30
(.169)
4.15
(.163)
1.90
(.074)
(.393DIA)
Ø10.00
EPOXY
(.590DIA)
(.866DIA)
Ø15.00
Ø22.00
(.078)
2.00
Also available with bushing Ø 22 (.866) : on request.
Illuminated
AV9SLD2
Non illuminated
AV9S0D2
Straight PC terminals Hex nut 22 (.866) across flats
(.385)
(.078)
(.118)
(.590DIA)
(.866DIA)
9.80
2.00
Ø15.00
Ø22.00
3.00
4.30
(.169)
6.00
(.236)
(.393DIA)
Ø10.00
EPOXY
(.590DIA)
(.866DIA)
Ø15.00
Ø22.00
(.078)
2.00 4.00
(.157)
Also available with bushing Ø 22 (.866) : on request.
Illuminated
AV9SLD4
Non illuminated
AV9S0D4
APEM www.apem.com B-107
AV series
Snap-action security pushbuttons with overmolded actuator
Options
B
New!
CODE MATERIAL
0 (std) Nickel plated brass
2Chrome plated brass
4Stainless steel
5Gold plated brass
6Chrome plated brass, satin
7Chrome pl. brass, matt black
8Varnished polished brass
9Polished brass
KFront panel sealing (IP65)
1
2
➀internal gasket
➁external gasket
BUSHING MATERIALS
CODE COLOUR
1Blue
2Black
3Green
4Grey
5Yellow
6Red
7White
8Translucent
9Orange
COLOUR OF OVERMOLDING
CODE COLOUR
Blank No LED
1Blue
2Red/green
3Green
5Yellow
6Red
7White
9Amber
LED COLOURS
The ring and symbols are obtained by photochemical engraving of a stainless steel insert.
The insert is then overmolded in the desired colour.
The following actuator styles are available. For other types, consult factory.
ACTUATOR STYLES
SEALING
Blank No sealing
After selecting basic model no.,
fill in last 5 boxes
with desired options.
CODE 001 002 003 004 005
DESCRIPTION Illuminated
ring and disc
Illuminated
ring Arrow Loudspeaker
OFF
Double
arrow
RING/SYMBOL
Series Bush./act.
config. Illum.
or not Contact
matl. Term.
type Bush.
material Actuator
style
LED
colour Seal.
AV
Over-
molding