RS1A - RS1M CREAT BY ART Pb 1.0 AMP. Surface Mount Fast Recovery Rectifiers SMA/DO-214AC RoHS COMPLIANCE Features For surface mounted application Glass passivated junction chip Built-in strain relief, ideal for automated placement Plastic material used carries Underwriters Laboratory Classification 94V-0 Fast switching for high efficiency High temperature soldering: 260 / 10 seconds at terminals Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Marking Diagram Case: Molded plastic Terminals: Pure tin plated, Lead free RS1X Polarity: Indicated by cathode band G = Green Compound Packing: 12mm tape per EIA STD RS-481 Y = Year M = Work Month Weight: 0.064 grams = Specific Device Code Maximum Ratings and Electrical Characteristics Rating at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% RS 1B 100 RS 1D 200 RS 1G 400 RS 1J 600 RS 1K 800 RS 1M 1000 Maximum Repetitive Peak Reverse Voltage VRRM RS 1A 50 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current .375 (9.5mm) Lead Length @ T L=90 IF(AV) 1 A Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method) IFSM 30 A VF 1.3 V Type Number Symbol Maximum Instantaneous Forward Voltage (Note 1) @1A Maximum Reverse Current @ Rated VR T A=25 T A=125 Trr Cj 10 RjA RjC 105 32 Storage Temperature Range uA 50 Typical Junction Capacitance (Note 3) Operating Temperature Range V 5 IR Maximum Reverse Recovery Time (Note 2) Typical Thermal Resistance Unit 150 250 500 nS pF O C/W TJ - 55 to + 150 O C TSTG - 55 to + 150 O C Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: I F=0.5A, I R=1.0A, I RR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:E11 RATINGS AND CHARACTERISTIC CURVES (RS1A THRU RS1M) FIG. 2 TYPICAL REVERSE CHARACTERISTICS 10 1.5 RESISTIVE OR INDUCTIVE LOAD 1 0.5 0 0 25 50 75 100 125 150 175 LEAD TEMPERATURE (oC) INSTANTANEOUS REVERSE CURRENT (uA) AVERAGE FORWARD CURRENT (A) FIG.1 FORWARD CURRENT DERATING CURVE TA=150 1 TA=100 0.1 0.01 TA=25 0.001 0 60 80 100 120 140 30 FIG. 5 TYPICAL FORWARD CHARACTERISRICS 20 100 10 Pulse Width=300us 1% Duty Cycle 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 4 TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE (pF) 40 8.3mS Single Half Sine Wave JEDEC Method 40 TA=25 f=1.0MHz Vsig=50mVp-p INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE A CURRENT (A) 50 20 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 10 TA=125 1 TA=25 0.1 0.01 10 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 1 1 10 100 REVERSE VOLTAGE (V) Version:E11 1.8