SPECIFICATION CONTROL DRAWING
TE Connectivity
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
SOLDERSLEEVE ONE-STEP WIRE
TERMINATOR, LEAD-FREE
LOW TEMPERATURE
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
DOCUMENT NO.:
B-155-90XX
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
PROD. REV.:
SEE TABLE
DOC. ISSUE:
2
DATE:
15-Apr-11
PREPARED BY:
mforonda
DCR NUMBER:
D050172
REPLACES:
---
CAGE CODE :
06090
SCALE:
---
SIZE:
A
SHEET:
1 of 1
Print Date: 9-May-11 © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Conductor
Dimensions Selection Guide
øB Total mm2 Total CMA Product
Name
Size Code
Color
Items 3 L
max
øA
min min max min max min max
Qty:
Item 2
B-155-9001 A Clear 26.0
[1.025]
1.7
[0.065]
0.4
[0.015]
1.7
[0.065] 0.3 0.8 450 1500 1
B-155-9002 A Red 2.7
[0.105]
1.3
[0.050]
2.7
[0.105] 0.8 2.0 1250 3500 2
B-155-9003 A Blue 4.5
[0.180]
1.8
[0.070]
4.5
[0.180] 2.0 4.0 2500 7200 2
B-155-9004 A Yellow 6.0
[0.235]
2.8
[0.110]
6.0
[0.235] 4.0 6.0 6100 19000 2
B-155-9005 A Grey
42.0
[1.655]
7.0
[0.275]
3.2
[0.125]
7.0
[0.275] 6.0 10.0 12000 25000 2
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX: Qty: see table (one solder washer shown).
SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006.
FLUX: TYPE ROM1 per ANSI / J-STD-004.
3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: see table.
APPLICATION
1. These controlled soldering devices are designed to splice tin-plated or bare copper stranded wires rated for at least +85C.
2. Temperature range: -55C to +125C.
3. When installed properly, it will meet the performance requirements of TE Connectivity / Raychem Specification RT-1404.
4. For installation procedure and application equipment consult RPIP-824-00.
For best results, prepare the wires as shown:
