ispLSI ® 1032EA
In-System Programmable High Density PLD
1032ea_04 1
USE ispMACH 4A5 FOR NEW
5V DESIGNS
Functional Block DiagramFeatures
• HIGH DENSITY PROGRAMMABLE LOGIC
— 6000 PLD Gates
— 64 I/O Pins, Four Dedicated Inputs
— 192 Registers
— High Speed Global Interconnect
— Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Random Logic
— Functionally Compatible with ispLSI 1032E
• NEW FEATURES
— 100% IEEE 1149.1 Boundary Scan Testable
— ispJTAG™ In-System Programmable via IEEE 1149.1
(JTAG) Test Access Port
— User Selectable 3.3V or 5V I/O Supports Mixed-
Voltage Systems (VCCIO Pin)
— Open-Drain Output Option
• HIGH PERFORMANCE E2CMOS® TECHNOLOGY
—fmax = 200 MHz Maximum Operating Frequency
—tpd = 4.5 ns Propagation Delay
— TTL Compatible Inputs and Outputs
— Electrically Erasable and Reprogrammable
— Non-Volatile
— 100% Tested at Time of Manufacture
— Unused Product Term Shutdown Saves Power
• IN-SYSTEM PROGRAMMABLE
— Increased Manufacturing Yields, Reduced Time-to-
Market and Improved Product Quality
— Reprogram Soldered Devices for Faster Prototyping
• OFFERS THE EASE OF USE AND FAST SYSTEM
SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY
OF FIELD PROGRAMMABLE GATE ARRAYS
— Complete Programmable Device Can Combine Glue
Logic and Structured Designs
— Enhanced Pin Locking Capability
— Four Dedicated Clock Input Pins
— Synchronous and Asynchronous Clocks
— Programmable Output Slew Rate Control to
Minimize Switching Noise
— Flexible Pin Placement
— Optimized Global Routing Pool Provides Global
Interconnectivity
Output Routing Pool
Output Routing Pool
D7 D6 D5 D4 D3 D2 D1 D0
B0 B1 B2 B3 B4 B5 B6 B7
A0
A1
A2
A3
A4
A5
A6
A7
C7
C6
C5
C4
C3
C2
C1
C0
Output Routing Pool
Output Routing Pool
CLK
Global Routing Pool (GRP)
0139A/1032EA
Logic
Array
DQ
DQ
DQ
DQ
GLB
Description
The ispLSI 1032EA is a High Density Programmable
Logic Device containing 192 Registers, 64 Universal I/O
pins, four Dedicated Input pins, four Dedicated Clock
Input pins and a Global Routing Pool (GRP). The GRP
provides complete interconnectivity between all of these
elements. The ispLSI 1032EA features 5V in-system
programmability (ISP™) and in-system diagnostic capa-
bilities via IEEE 1149.1 Test Access Port. The ispLSI
1032EA device offers non-volatile reprogrammability of
the logic, as well as the interconnects to provide truly
reconfigurable systems. A functional superset of the
ispLSI 1032 architecture, the ispLSI 1032EA device adds
user selectable 3.3V or 5V I/O and open-drain output
options.
The basic unit of logic on the ispLSI 1032EA device is the
Generic Logic Block (GLB). The GLBs are labeled A0,
A1…D7 (Figure 1). There are a total of 32 GLBs in the
ispLSI 1032EA device. Each GLB has 18 inputs, a
programmable AND/OR/Exclusive OR array, and four
outputs which can be configured to be either combinato-
rial or registered. Inputs to the GLB come from the GRP
and dedicated inputs. All of the GLB outputs are brought
back into the GRP so that they can be connected to the
inputs of any other GLB on the device.
Copyright © 2002 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A. January 2002
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
2
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
Functional Block Diagram
Figure 1. ispLSI 1032EA Functional Block Diagram
The device also has 64 I/O cells, each of which is directly
connected to an I/O pin. Each I/O cell can be individually
programmed to be a combinatorial input, registered
input, latched input, output or bi-directional
I/O pin with 3-state control. The signal levels are TTL
compatible voltages and the output drivers can source
2mA or sink 8mA. Each output can be programmed
independently for fast or slow output slew rate to
minimize overall output switching noise. By connecting
the VCCIO pin to a common 5V or 3.3V power supply,
I/O output levels can be matched to 5V or 3.3V-compat-
ible voltages.
Eight GLBs, 16 I/O cells, dedicated inputs (if available)
and one ORP are connected together to make a
Megablock (Figure 1). The outputs of the eight GLBs are
connected to a set of 16 universal I/O cells by the ORP.
Each ispLSI 1032EA device contains four Megablocks.
The GRP has, as its inputs, the outputs from all of the
GLBs and all of the inputs from the bi-directional I/O cells.
All of these signals are made available to the inputs of the
GLBs. Delays through the GRP have been equalized to
minimize timing skew.
Clocks in the ispLSI 1032EA device are selected using
the Clock Distribution Network. Four dedicated clock pins
(Y0, Y1, Y2 and Y3) are brought into the distribution
network, and five clock outputs (CLK 0, CLK 1, CLK 2,
IOCLK 0 and IOCLK 1) are provided to route clocks to the
GLBs and I/O cells. The Clock Distribution Network can
also be driven from a special clock GLB (C0 on the ispLSI
1032EA device). The logic of this GLB allows the user to
create an internal clock from a combination of internal
signals within the device.
Programmable Open-Drain Outputs
In addition to the standard output configuration, the
outputs of the ispLSI 1032EA are individually program-
mable, either as a standard totem-pole output or an
open-drain output. The totem-pole output drives the
specified Voh and Vol levels, whereas the open-drain
output drives only the specified Vol. The Voh level on the
open-drain output depends on the external loading and
pull-up. This output configuration is controlled by a pro-
grammable fuse. The default configuration when the
device is in bulk erased state is totem-pole configuration.
The open-drain/totem-pole option is selectable through
the Lattice software tools.
I/O 63
I/O 62
I/O 61
I/O 60
RESET
Global
Routing
Pool
(GRP)
CLK 0
CLK 1
CLK 2
IOCLK 0
IOCLK 1
Clock
Distribution
Network
C7
C6
C5
C4
C3
C2
C1
C0
A0
A1
A2
A3
A4
A5
A6
A7
Generic
Logic Blocks
(GLBs)
Megablock
Output Routing Pool (ORP)
Output Routing Pool (ORP)
Output Routing Pool (ORP)
Output Routing Pool (ORP)
Input Bus
Input Bus
VCCIO
lnput Bus
lnput Bus
I/O 59
I/O 58
I/O 57
I/O 56
I/O 55
I/O 54
I/O 53
I/O 52
I/O 51
I/O 50
I/O 49
I/O 48
IN 7
IN 6
D7 D6 D5 D4 D3 D2 D1 D0
I/O 16
I/O 17
I/O 18
I/O 19
I/O 20
I/O 21
I/O 22
I/O 23
I/O 24
I/O 25
I/O 26
I/O 27
I/O 28
I/O 29
I/O 30
I/O 31
I/O 35
I/O 34
I/O 33
I/O 32
I/O 0
I/O 1
I/O 2
I/O 3
I/O 12
I/O 13
I/O 14
I/O 15
TDI
TDO
TMS
TCK
I/O 8
I/O 9
I/O 10
I/O 11
I/O 4
I/O 5
I/O 6
I/O 7
I/O 47
I/O 46
I/O 45
I/O 44
GOE 1/IN 5
GOE 0/IN 4
I/O 43
I/O 42
I/O 41
I/O 40
I/O 39
I/O 38
I/O 37
I/O 36
Y0
Y1
Y2
Y3
B0 B1 B2 B3 B4 B5 B6 B7
0139B/1032EA
3
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
Symbol Parameter Min Max Units
tbtcp TCK [BSCAN test] clock pulse width 100 – ns
tbtch TCK [BSCAN test] pulse width high 50 – ns
tbtcl TCK [BSCAN test] pulse width low 50 – ns
tbtsu TCK [BSCAN test] setup time 20 – ns
tbth TCK [BSCAN test] hold time 25 – ns
trf TCK [BSCAN test] rise and fall time 50 – mV/ns
tbtco TAP controller falling edge of clock to valid output – 25 ns
tbtoz TAP controller falling edge of clock to data output disable – 25 ns
tbtvo TAP controller falling edge of clock to data output enable – 25 ns
tbtcpsu BSCAN test Capture register setup time 40 – ns
tbtcph BSCAN test Capture register hold time 25 – ns
tbtuco BSCAN test Update reg, falling edge of clock to valid output – 50 ns
tbtuoz BSCAN test Update reg, falling edge of clock to output disable – 50 ns
tbtuov BSCAN test Update reg, falling edge of clock to output enable – 50 ns
Figure 2. Boundary Scan Waveforms and Timing Specifications
TMS
TDI
TCK
TDO
Data to be
captured
Data to be
driven out
Valid Data Valid Data
Valid Data Valid Data
Data Captured
btsu
T
bth
T
btcl
T
btch
T
btcp
T
btvo
T
btco
T
btoz
T
btcpsu
T
btcph
T
btuov
T
btuco
T
btuoz
T
Boundary Scan
4
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
Absolute Maximum Ratings 1
Supply Voltage Vcc .................................. -0.5 to +7.0V
Input Voltage Applied........................ -2.5 to VCC +1.0V
Off-State Output Voltage Applied ..... -2.5 to VCC +1.0V
Storage Temperature................................ -65 to 150°C
Case Temp. with Power Applied .............. -55 to 125°C
Max. Junction Temp. (TJ) with Power Applied ... 150°C
1. Stresses above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional
operation of the device at these or at any other conditions above those indicated in the operational sections of this specification
is not implied (while programming, follow the programming specifications).
DC Recommended Operating Conditions
T
A
= 0°C to + 70°C
SYMBOL
Table 2-0005/1032EA
VCC
VCCIO
VIH
VIL
PARAMETER
Supply Voltage
Supply Voltage: Output Drivers
Input High Voltage
Input Low Voltage
MIN. MAX. UNITS
4.75
4.75
3.0
2.0
0
5.25
5.25
3.6
V
cc
+1
0.8
V
V
V
V
V
Commercial
5V
3.3V
Capacitance (TA=25oC, f=1.0 MHz)
Erase/Reprogram Specifications
Table 2-0008/1032EA
PARAMETER
Erase/Reprogram Cycles
MINIMUM MAXIMUM UNITS
10000 – Cycles
C
SYMBOL
Table 2-0006/1032EA
C
PARAMETER
Y0 Clock Capacitance 10
UNITSTYPICAL TEST CONDITIONS
1
2
8Dedicated Input, I/O, Y1, Y2, Y3, Clock Capacitance
(Commercial/Industrial)
pf
pf
V = 5.0V, V = 2.0V
V = 5.0V, V = 2.0V
CC
CC PIN
PIN
5
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
Output Load Conditions (see Figure 3)
Switching Test Conditions
TEST CONDITION R1 R2 CL
A 470Ω390Ω35pF
B∞390Ω35pF
470Ω390Ω35pF
Active High
Active Low
C
470Ω390Ω5pF
∞390Ω5pF
Active Low to Z
at V +0.5V
OL
Active High to Z
at V -0.5V
OH
Table 2-0004/1032EA
Figure 3. Test Load
+ 5V
R1
R2CL*
Device
Output
Test
Point
*CL includes Test Fixture and Probe Capacitance.
0213a
DC Electrical Characteristics
Over Recommended Operating Conditions
Input Pulse Levels
Table 2-0003/1032EA
Input Rise and Fall Time 10% to 90%
Input Timing Reference Levels
Output Timing Reference Levels
Output Load
GND to 3.0V
1.5V
1.5V
See Figure 3
3-state levels are measured 0.5V from
steady-state active level.
1.5ns
V
OL
SYMBOL
1. One output at a time for a maximum duration of one second. V
OUT
= 0.5V was selected to avoid test
problems by tester ground degradation. Characterized but not 100% tested.
2. Measured using eight 16-bit counters.
3. Typical values are at V
CC
= 5V and T
A
= 25°C.
4. Unused inputs held at 0.0V.
5. Maximum I
CC
varies widely with specific device configuration and operating frequency. Refer to the
Power Consumption section of this data sheet and the Thermal Management section of the Lattice Semiconductor
Data Book CD-ROM to estimate maximum I
CC
.
Table 2-0007/1032EA
I
IH
I
IL
PARAMETER
I
IL-PU
I
OS
1
I
CC
2, 4, 5
Output Low Voltage
Input or I/O Low Leakage Current
Operating Power Supply Current
I
OL
= 8 mA
0V ≤ V
IN
≤ V
IL
(Max.)
V
IL
= 0.0V, V
IH
= 3.0V
CONDITION MIN. TYP.
3
MAX. UNITS
—
—
—
—
—
—
—
—
0.4
10
-10
10
V
V
OH Output High Voltage I
OH
= -2 mA, V
CCIO
= 3.0V
I
OH
= -4 mA, V
CCIO
= 4.75V
2.4 — — V
2.4 — — V
μA
Input or I/O High Leakage Current V
CCIO
≤ V
IN
≤ 5.25V
(V
CCIO
- 0.2)V ≤ V
IN
≤ V
CCIO
μA
μA
I/O Active Pull-Up Current 0V ≤ V
IN
≤ V
IL
——-200 μA
Output Short Circuit Current V
CCIO
= 5.0V or 3.3V, V
OUT
= 0.5V — — -240 mA
— 153 mA—
f
TOGGLE
= 1 MHz
6
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
USE 1032EA-200 FOR
NEW DESIGNS
tpd1
UNITS
TEST
COND.
1. Unless noted otherwise, all parameters use a GRP load of four GLBs, 20 PTXOR path, ORP and Y0 clock.
2. Refer to Timing Model in this data sheet for further details.
3. Standard 16-bit counter using GRP feedback.
4. Reference Switching Test Conditions section.
Table 2-0030A/1032EA
v.2.4
1
4
3
1
tsu2 + tco1
( )
-170
MIN. MAX.
DESCRIPTION#
2
PARAMETER
A 1 Data Propagation Delay, 4PT Bypass, ORP Bypass — 5.0 ns
tpd2 A 2 Data Propagation Delay, Worst Case Path — ns
fmax (Int.) A 3 Clock Frequency with Internal Feedback 170 — MHz
fmax (Ext.) — 4 Clock Frequency with External Feedback — MHz
fmax (Tog.) — 5 Clock Frequency, Max. Toggle — MHz
tsu1 — 6 GLB Reg. Setup Time before Clock,4 PT Bypass — ns
tco1 A 7 GLB Reg. Clock to Output Delay, ORP Bypass — ns
th1 — 8 GLB Reg. Hold Time after Clock, 4 PT Bypass — ns
tsu2 — 9 GLB Reg. Setup Time before Clock — ns
tco2 — 10 GLB Reg. Clock to Output Delay — ns
th2 — 11 GLB Reg. Hold Time after Clock — ns
tr1 A 12 Ext. Reset Pin to Output Delay — ns
trw1 — 13 Ext. Reset Pulse Duration — ns
tptoeen B 14 Input to Output Enable — ns
tptoedis C 15 Input to Output Disable — ns
twh — 18 External Synchronous Clock Pulse Duration, High 2.25 ns
twl — 19 External Synchronous Clock Pulse Duration, Low 2.25 ns
tsu3 — 20 I/O Reg. Setup Time before Ext. Sync Clock (Y2, Y3) — ns
th3 — 21 I/O Reg. Hold Time after Ext. Sync. Clock (Y2, Y3) — ns
125
222
3.5
0.0
4.5
0.0
4.0
3.0
0.0
7.0
3.5
4.5
7.0
9.0
9.0
—
—
( )
1
twh + twl
tgoeen B 16 Global OE Output Enable — ns6.5
tgoedis C 17 Global OE Output Disable — ns6.5
-200
MIN. MAX.
— 4.5
—
200 —
—
—
—
—
—
—
—
—
—
—
—
—
2.0
2.0
—
—
143
250
3.0
0.0
3.5
0.0
3.5
3.0
0.0
6.0
3.5
4.0
5.5
7.0
7.0
—
—
— 4.5
— 4.5
External Timing Parameters
Over Recommended Operating Conditions
7
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
External Timing Parameters
Over Recommended Operating Conditions
tpd1
UNITS
TEST
COND.
1. Unless noted otherwise, all parameters use a GRP load of four GLBs, 20 PTXOR path, ORP and Y0 clock.
2. Refer to Timing Model in this data sheet for further details.
3. Standard 16-bit counter using GRP feedback.
4. Reference Switching Test Conditions section.
Table 2-0030B/1032EA
v.2.4
1
4
3
1
tsu2 + tco1
( )
-100
MIN. MAX.
DESCRIPTION#
2
PARAMETER
A 1 Data Propagation Delay, 4PT Bypass, ORP Bypass — 10.0 ns
tpd2 A 2 Data Propagation Delay, Worst Case Path — ns
fmax (Int.) A 3 Clock Frequency with Internal Feedback 100 — MHz
fmax (Ext.) — 4 Clock Frequency with External Feedback — MHz
fmax (Tog.) — 5 Clock Frequency, Max. Toggle — MHz
tsu1 — 6 GLB Reg. Setup Time before Clock,4 PT Bypass — ns
tco1 A 7 GLB Reg. Clock to Output Delay, ORP Bypass — ns
th1 — 8 GLB Reg. Hold Time after Clock, 4 PT Bypass — ns
tsu2 — 9 GLB Reg. Setup Time before Clock — ns
tco2 — 10 GLB Reg. Clock to Output Delay — ns
th2 — 11 GLB Reg. Hold Time after Clock — ns
tr1 A 12 Ext. Reset Pin to Output Delay — ns
trw1 — 13 Ext. Reset Pulse Duration — ns
tptoeen B 14 Input to Output Enable — ns
tptoedis C 15 Input to Output Disable — ns
twh — 18 External Synchronous Clock Pulse Duration, High 4.0 ns
twl — 19 External Synchronous Clock Pulse Duration, Low 4.0 ns
tsu3 — 20 I/O Reg. Setup Time before Ext. Sync Clock (Y2, Y3) — ns
th3 — 21 I/O Reg. Hold Time after Ext. Sync. Clock (Y2, Y3) — ns
77
125
6.0
0.0
7.0
0.0
6.5
3.5
0.0
12.5
6.0
7.0
13.5
15.0
15.0
—
—
( )
1
twh + twl
tgoeen B 16 Global OE Output Enable — ns9.0
tgoedis C 17 Global OE Output Disable — ns9.0
-125
MIN. MAX.
— 7.5
—
125 —
—
—
—
—
—
—
—
—
—
—
—
—
3.0
3.0
—
—
100
167
4.5
0.0
5.5
0.0
5.0
3.0
0.0
10.0
4.5
5.5
10.0
12.0
12.0
—
—
— 7.0
— 7.0
8
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
USE 1032EA-200 FOR
NEW DESIGNS
GRP Delay, 32 GLB Loads
tiobp
1. Internal Timing Parameters are not tested and are for reference only.
2. Refer to Timing Model in this data sheet for further details.
3. The XOR adjacent path can only be used by hard macros.
Table 2-0036A/1032EA
v.2.4
Inputs
UNITS
-170
MIN. MIN.MAX. MAX.
DESCRIPTION#
2
PARAM.
22 I/O Register Bypass ns
tiolat 23 I/O Latch Delay ns
tgrp32 33 ns
GLB
t
1ptxor 36 1 ProductTerm/XOR Path Delay ns
t20ptxor 37 20 Product Term/XOR Path Delay ns
txoradj 38 XOR Adjacent Path Delay ns
tgbp 39 GLB Register Bypass Delay ns
tgsu 40 GLB Register Setup Time before Clock ns
tgh 41 GLB Register Hold Time after Clock ns
tgco 42 GLB Register Clock to Output Delay ns
3
tgro 43 GLB Register Reset to Output Delay ns
tptre 44 GLB Product Term Reset to Register Delay ns
tptoe 45 GLB Product Term Output Enable to I/O Cell Delay ns
tptck 46 GLB Product Term Clock Delay ns
ORP
GRP
t4ptbpc 34 4 ProductTerm Bypass Path Delay (Combinatorial) ns
t4ptbpr 35 4 Product Term Bypass Path Delay (Registered) ns
torp 48 ORP Delay ns
torpbp 49 ORP Bypass Delay ns
tiosu 24 I/O Register Setup Time before Clock ns
tioh 25 I/O Register Hold Time after Clock ns
tioco 26 I/O Register Clock to Out Delay ns
tior 27 I/O Register Reset to Out Delay ns
tdin 28 Dedicated Input Delay ns
tgrp16 32 GRP Delay, 16 GLB Loads ns
tgrp8 31 GRP Delay, 8 GLB Loads ns
tgrp4 30 GRP Delay, 4 GLB Loads ns
tgrp1 29 GRP Delay, 1 GLB Load ns
-200
—
—
—
—
—
—
—
—
—
—
—
—
—
0.2
1.0
1.5
—
—
3.0
0.0
—
—
—
—
—
—
—
0.3
4.0
2.9
1.9
1.9
1.9
0.6
1.4
3.8
2.5
2.1
1.7
1.8
—
—
2.5
0.8
0.1
—
—
4.0
4.0
1.1
2.1
1.7
1.5
1.3
—
—
—
—
—
—
—
—
—
—
—
—
—
0.3
2.0
1.7
—
—
3.0
0.0
—
—
—
—
—
—
—
0.3
4.0
3.0
2.3
2.2
2.2
1.0
1.4
4.7
2.7
3.6
2.1
2.0
—
—
2.7
tgfb 47 GLB Feedback Delay ns
—0.0 —0.3
1.0
0.1
—
—
4.6
4.6
1.8
2.2
1.8
1.6
1.4
Internal Timing Parameters1
9
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
USE 1032EA-200 FOR
NEW DESIGNS
tob
1. Internal Timing Parameters are not tested and are for reference only. Table 2-0037A/1032EA
v.2.4
Outputs
UNITS
-170
MIN. MIN.MAX. MAX.
DESCRIPTION#PARAM.
50 Output Buffer Delay ns
toen 52 I/O Cell OE to Output Enabled ns
tgy0 55 Clock Delay, Y0 to Global GLB Clock Line (Ref. clk) ns
Global Reset
Clocks
tgr 60 Global Reset to GLB and I/O Registers ns
todis 53 I/O Cell OE to Output Disabled ns
tgy1/2 56 Clock Delay, Y1 or Y2 to Global GLB Clock Line ns
tgcp 57 Clock Delay, Clock GLB to Global GLB Clock Line ns
tioy2/3 58 Clock Delay, Y2 or Y3 to I/O Cell Global Clock Line ns
tiocp 59 Clock Delay, Clock GLB to I/O Cell Global Clock Line ns
tgoe 54 Global OE ns
tsl 51 Output Buffer Delay, Slew Limited Adder ns
-200
—
—
0.9
—
0.9
0.8
0.0
0.8
—
—
—
0.9
3.1
0.9
0.0
3.1
0.9
1.8
0.0
2.8
1.4
5.0
—
—
0.9
—
0.9
0.8
0.0
0.8
—
—
—
1.1
3.5
0.9
0.4
3.5
0.9
1.8
0.0
2.8
2.9
5.0
Internal Timing Parameters1
10
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
Internal Timing Parameters1
GRP Delay, 32 GLB Loads
t
iobp
1. Internal Timing Parameters are not tested and are for reference only.
2. Refer to Timing Model in this data sheet for further details.
3. The XOR adjacent path can only be used by hard macros.
Table 2-0036B/1032EA
v.2.4
Inputs
UNITS
-100
MIN. MIN.MAX. MAX.
DESCRIPTION#
2
PARAM.
22 I/O Register Bypass ns
t
iolat 23 I/O Latch Delay ns
t
grp32 33 ns
GLB
t
1ptxor 36 1 Product Term/XOR Path Delay ns
t
20ptxor 37 20 Prod. Term/XOR Path Delay ns
t
xoradj 38 XOR Adjacent Path Delay ns
t
gbp 39 GLB Register Bypass Delay ns
t
gsu 40 GLB Register Setup Time before Clock ns
t
gh 41 GLB Register Hold Time after Clock ns
t
gco 42 GLB Register Clock to Output Delay ns
3
t
gro 43 GLB Register Reset to Output Delay ns
t
ptre 44 GLB Product Term Reset to Register Delay ns
t
ptoe 45 GLB Product Term Output Enable to I/O Cell Delay ns
t
ptck 46 GLB Product Term Clock Delay ns
ORP
GRP
t
4ptbpc 34 4 Product Term Bypass Path Delay (Combinatorial) ns
t
4ptbpr 35 4 Product Term Bypass Path Delay (Registered) ns
t
orp 48 ORP Delay ns
t
orpbp 49 ORP Bypass Delay ns
t
iosu 24 I/O Register Setup Time before Clock ns
t
ioh 25 I/O Register Hold Time after Clock ns
t
ioco 26 I/O Register Clock to Out Delay ns
t
ior 27 I/O Register Reset to Out Delay ns
t
din 28 Dedicated Input Delay ns
t
grp16 32 GRP Delay, 16 GLB Loads ns
t
grp8 31 GRP Delay, 8 GLB Loads ns
t
grp4 30 GRP Delay, 4 GLB Loads ns
t
grp1 29 GRP Delay, 1 GLB Load ns
-125
—
—
—
—
—
—
—
—
—
—
—
—
—
1.4
4.0
3.5
—
—
3.4
0.0
—
—
—
—
—
—
—
0.3
4.0
3.3
3.6
3.6
3.6
1.2
1.4
4.9
3.8
5.7
3.4
3.1
—
—
3.9
1.3
0.2
—
—
4.6
4.6
1.9
2.5
2.1
1.9
1.7
—
—
—
—
—
—
—
—
—
—
—
—
—
0.3
3.5
2.8
—
—
3.0
0.0
—
—
—
—
—
—
—
0.4
4.0
3.7
4.3
4.3
4.3
2.1
1.7
5.0
4.5
7.2
4.9
3.8
—
—
4.7
t
gfb 47 GLB Feedback Delay ns
—0.3— 0.3
1.4
0.4
—
—
5.0
5.0
2.2
2.9
2.5
2.3
2.1
11
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
Internal Timing Parameters1
tob
1. Internal Timing Parameters are not tested and are for reference only. Table 2-0037B/1032EA
v.2.4
Outputs
UNITS
-100
MIN. MIN.MAX. MAX.
DESCRIPTION#PARAM.
50 Output Buffer Delay ns
toen 52 I/O Cell OE to Output Enabled ns
tgy0 55 Clock Delay, Y0 to Global GLB Clk Line (Ref. Clock) ns
Global Reset
Clocks
tgr 60 Global Reset to GLB and I/O Registers ns
todis 53 I/O Cell OE to Output Disabled ns
tgy1/2 56 Clock Delay, Y1 or Y2 to Global GLB Clock Line ns
tgcp 57 Clock Delay, Clock GLB to Global GLB Clock Line ns
tioy2/3 58 Clock Delay, Y2 or Y3 to I/O Cell Global Clock Line ns
tiocp 59 Clock Delay, Clock GLB to I/O Cell Global Clock Line ns
tgoe 54 Global OE ns
tsl 51 Output Buffer Delay, Slew Limited Adder ns
-125
—
—
1.1
—
0.9
0.8
0.0
0.8
—
—
—
2.0
5.1
1.9
5.1
1.5
1.8
0.0
2.8
3.9
5.0
5.1
—
—
1.9
—
1.5
0.8
0.0
0.8
—
—
—
1.7
4.0
1.1
4.0
0.9
1.8
0.0
2.8
3.0
5.0
2.1
12
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
ispLSI 1032EA Timing Model
GLB Reg
Delay
I/O Pin
(Output)
ORP
Delay
0491/1032EA
Feedback#47
Reg 4 PT Bypass
20 PT
XOR Delays
Control
PTs
Input
Register
Clock
Distribution
I/O Pin
(Input)
Y0
Y1,2,3
DQ
GRP4 GLB Reg Bypass ORP Bypass
DQ
RST
RE
OE
CK
I/O Reg Bypass
I/O CellORPGLBGRPI/O Cell
#23 - 27
#30 #35
#34 Comb 4 PT Bypass
#36 - 38
#56 - 59 #44 - 46
#55
#54
#48
#49
Reset
Ded. In
GOE 0,1
#28
#22
RST
#60
#60
#39
#40 - 43
#52, 53
#50, 51
GRP Loading
Delay
#29, 31 - 33
Derivations of tsu, th and tco from the Product Term Clock
1
=
=
=
=
t
su
Logic + Reg su - Clock (min)
(
t
iobp +
t
grp4 +
t
20ptxor) + (
t
gsu) - (
t
iobp +
t
grp4 +
t
ptck(min))
(#22 + #30 + #37) + (#40) - (#22 + #30 + #46)
(0.3 + 1.5 + 1.9) + (0.2) - (0.3 + 1.5 + 1.5)0.6
1.6
7.4
0.8
1.4
7.2
=
=
=
=
t
h Clock (max) + Reg h - Logic
(
t
iobp +
t
grp4 +
t
ptck(max)) + (
t
gh) - (
t
iobp +
t
grp4 +
t
20ptxor)
(#22 + #30 + #46) + (#41) - (#22 + #30 + #37)
(0.3 + 1.5 + 2.5) + (1.0) - (0.3 + 1.5 + 1.9)
=
=
=
=
t
co
Clock (max) + Reg co + Output
(
t
iobp +
t
grp4 +
t
ptck(max)) + (
t
gco) + (
t
orp +
t
ob)
(#22 + #30 + #46) + (#42) + (#48 + #50)
(0.3 + 1.5 + 2.5) + (1.4) + (0.8 + 0.9)
Table 2-0042a/1024EA
v.2.5
Derivations of tsu, th and tco from the Clock GLB 1
=
=
=
=
t
su
Logic + Reg (setup) - Clock (min)
(
t
iobp +
t
grp4 +
t
20ptxor) + (
t
gsu) - (
t
gy0(min) +
t
gco +
t
gcp(min))
(#22 + #30 + #37) + (#40) - (#55 + #42 + #57)
(0.3 + 1.5 + 1.9) + (0.2) - (0.9 + 1.4 + 0.8)
=
=
=
=
t
h
Clock (max) + Reg (hold) - Logic
(
t
gy0(max) +
t
gco +
t
gcp(max)) + (
t
gh) - (
t
iobp +
t
grp4 +
t
20ptxor)
(#55 + #42 + #57) + (#41) - (#22 + #30 + #37)
(0.9 + 1.4 + 1.8) + (1.0) - (0.3 + 1.5 + 1.9)
=
=
=
=
t
co
Clock (max) + Reg (clock-to-out) + Output
(
t
gy0(max) +
t
gco +
t
gcp(max)) + (
t
gco) + (
t
orp +
t
ob)
(#55 + #42 + #57) + (#42) + (#48 + #50)
(0.9 + 1.4 + 1.8) + (1.4) + (0.8 + 0.9)
1. Calculations are based upon timing specifications for the ispLSI 1032EA-200.
13
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
Maximum GRP Delay vs GLB Loads
GLB Load
ispLSI 1032EA-200
ispLSI 1032EA-170
ispLSI 1032EA-125
ispLSI 1032EA-100
3
4
1 8 16 32
GRP Delay (ns)
4
2
GRP/GLB/1032EA
1
Power Consumption
Power consumption in the ispLSI 1032EA device de-
pends on two primary factors: the speed at which the
device is operating, and the number of product terms
used. Figure 4 shows the relationship between power
and operating speed.
0127/1032EA
Icc can be estimated for the ispLSI 1032EA using the following equation:
Icc = 20mA + (# of PTs * .52) + (# of nets * Max Freq * .003)
Where:
# of PTs = Number of Product Terms used in design
# of nets = Number of Signals used in device
Max freq = Highest Clock Frequency to the device (in MHz)
The Icc estimate is based on typical conditions (Vcc = 5.0V, room temperature) and an assumption of four GLB
loads on average exists. These values are for estimates only. Since the value of Icc is sensitive to operating
conditions and the program in the device, the actual Icc should be verified.
fmax (MHz)
Notes: Configuration of eight 16-bit counters
Typical current at 5V, 25°C
160
140
120
100
200
050 100 150 200 250
ICC (mA)
220
ispLSI 1032EA
180
240
260
Figure 4. Typical Device Power Consumption vs fmax
14
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
Pin Description
Input - Controls the operation of the ISP state machine.
This is a dual function pin. It can be used either as Global Output Enable for all I/O cells or it can be
used as a dedicated input pin.
This is a dual function pin. It can be used either as Global Output Enable for all I/O cells or it can be
used as a dedicated input pin.
Dedicated Clock input. This clock input is brought into the clock distribution network, and can
optionally be routed to any GLB on the device.
Dedicated Clock input. This clock input is connected to one of the clock inputs of all of the GLBs on
the device.
Input/Output Pins - These are the general purpose I/O pins used by the logic array.
NAME
Table 2-0002A/1032EA
DESCRIPTION
I/O 0 - I/O 3
I/O 4 - I/O 7
I/O 8 - I/O 11
I/O 12 - I/O 15
I/O 16 - I/O 19
I/O 20 - I/O 23
I/O 24 - I/O 27
I/O 28 - I/O 31
I/O 32 - I/O 35
I/O 36 - I/O 39
I/O 40 - I/O 43
I/O 44 - I/O 47
I/O 48 - I/O 51
I/O 52 - I/O 55
I/O 56 - I/O 59
I/O 60 - I/O 63
Y1
Y0
TMS
Ground (GND)
GND
Vcc
VCC
GOE 0/IN 4
1
Dedicated input pins to the device.
IN 6, IN 7
GOE 1/IN 5
1
Input - Functions as an input pin to load programming data into the device and also used as one of
the two control pins for the ispJTAG state machine.
TDI
TDO Output - Functions as an output pin to read serial shift register data.
TCK Input - Functions as a clock pin for the Serial Shift Register.
Active Low (0) Reset pin which resets all of the GLB and I/O registers in the device.
RESET
Dedicated Clock input. This clock input is brought into the clock distribution network, and can
optionally be routed to any GLB and/or any I/O cell on the device.
Y2
Dedicated Clock input. This clock input is brought into the clock distribution network, and can
optionally be routed to any I/O cell on the device.
Y3
1,
26,
51,
76,
2, 24, 25, No connect.
27, 49, 50,
52, 74, 75,
77, 99, 100
1. Pins have dual function capability which is software selectable.
2. NC pins are not to be connected to any active signals, Vcc or GND.
TQFP PIN
NUMBERS
17,
21,
29,
33,
40,
44,
48,
56,
67,
71,
79,
83,
90,
94,
98,
6,
18,
22,
30,
34,
41,
45,
53,
57,
68,
72,
80,
84,
91,
95,
3,
7,
19,
23,
31,
35,
42,
46,
54,
58,
69,
73,
81,
85,
92,
96,
4,
8,
20,
28,
32,
36,
43,
47,
55,
59,
70,
78,
82,
86,
93,
97,
5,
9
65
11
37
89,
87
66
10
16
39
60
15
62
61
13, 38, 63, 88
NC
2
6412,
Supply voltage for output drivers, 5V or 3.3V.
VCCIO 14
15
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
2
NC
2
NC
I/O 57
I/O 58
I/O 59
I/O 60
I/O 61
I/O 62
I/O 63
IN 7
Y0
VCC
GND
VCCIO
RESET
TDI
I/O 0
I/O 1
I/O 2
I/O 3
I/O 4
I/O 5
I/O 6
2
NC
2
NC
NC
2
NC
2
I/O 38
I/O 37
I/O 36
I/O 35
I/O 34
I/O 33
I/O 32
GOE 0/IN 4
1
Y1
VCC
GND
Y2
Y3
TCK
I/O 31
I/O 30
I/O 29
I/O 28
I/O 27
I/O 26
I/O 25
NC
2
NC
2
NC
2
NC
2
I/O 56
I/O 55
I/O 54
I/O 53
I/O 52
I/O 51
I/O 50
I/O 49
I/O 48
IN 6
GND
GOE 1/IN 5
1
I/O 47
I/O 46
I/O 45
I/O 44
I/O 43
I/O 42
I/O 41
I/O 40
I/O 39
NC
2
NC
2
2
NC
2
NC
I/O 7
I/O 8
I/O 9
I/O 10
I/O 11
I/O 12
I/O 13
I/O 14
I/O 15
TMS
GND
TDO
I/O 16
I/O 17
I/O 18
I/O 19
I/O 20
I/O 21
I/O 22
I/O 23
I/O 24
2
NC
2
NC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
57
56
55
54
53
52
51
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
58
ispLSI 1032EA
Top View
1. Pins have dual function capability which is software selectable.
2. NC pins are not to be connected to any active signal, VCC or GND.
100-TQFP/1032EA
ispLSI 1032EA 100-Pin TQFP Pinout Diagram
Pin Configurations
16
Specifications ispLSI 1032EA
USE ispMACH 4A5 FOR NEW
5V DESIGNS
Part Number Description
Device Number
Grade
Blank = Commercial
1032EA - XXX X XXXX X
Speed
200 = 200 MHz
f
max
170 = 170 MHz
f
max*
125 = 125 MHz
f
max
100 = 100 MHz
f
max
*1032EA-200 recommended for new designs.
Power
L = Low
Package
T100 = 100-Pin TQFP
Device Family
0212/1032EA
ispLSI
ispLSI 1032EA Ordering Information
100 10 100-Pin TQFPispLSI 1032EA-100LT100
Table 2-0041A/1032EA
FAMILY fmax (MHz) ORDERING NUMBER PACKAGEtpd (ns)
ispLSI 125 100-Pin TQFP7.5 ispLSI 1032EA-125LT100
170 100-Pin TQFP5.0 ispLSI 1032EA-170LT100*
200 100-Pin TQFP4.5 ispLSI 1032EA-200LT100
*1032EA-200 recommended for new designs.
COMMERCIAL
