DATASHEET - M22-CLED-B
Light element, LED, blue, front mount, 12-30VAC/DC, spring clamp
connection
Part no. M22-CLED-B
Catalog No. 218061
Alternate Catalog
No.
M22-CLED-BQ
EL-Nummer
(Norway)
4355775
Delivery program
Basic function accessories LED elements
Description Cage Clamp is a registered trademark of Wago Kontakttechnik GmbH/Minden,
Germany
Connection technique Cage Clamp
Fixing Front fixing
Rated operational voltage UeV 12 - 30 V AC/DC, 50/60 Hz
Rated operational current IemA 8 - 15
Power consumption Pmax. W 0.26
Lifespan to EN 60064 at ta = +25 °C tmean (AC) h 100000
Degree of Protection IP20
at 24 V
Colour
Blue
Connection to SmartWire-DT no
Approval
Connection technique Cage Clamp
Notes
For indicator lights, illuminated pushbutton actuators, and illuminated selector switch actuators, the following applies:
M22...-R only in combination with M22-LED...-R
M22...-G only in combination with M22-LED...-G
M22...-W only in combination with M22-LED...-W
M22...-Y only in combination with M22-LED...-W
M22…-B in combination with M22-LED…-W or M22-LED…-B
Technical data
General
Standards IEC 60947-5-1
Operating torque (screw terminals) Nm ≦ 0.8
Degree of Protection IP20
Climatic proofing Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
Open °C -25 - +70
Storage °C - 40 - + 80
03/02/2021 Eaton 218061 ED2021 V76.0 EN 1 / 3
Mounting position As required
Mechanical shock resistance according to IEC 60068-2-27
Shock duration 11 ms, half-sinusoidal
g > 30
Mechanical shock resistance g 30
Shock duration 11 ms
Sinusoidal
according to IEC 60068-2-27
Terminal capacities mm2
Solid mm20.75 - 2.5
Stranded mm20.5 - 2.5
Contacts
Rated impulse withstand voltage Uimp V AC 6000
Rated insulation voltage UiV 500
Overvoltage category/pollution degree III/3
Indoor and protected outdoor installation
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation InA 0
Heat dissipation per pole, current-dependent Pvid W 0
Equipment heat dissipation, current-dependent Pvid W 0
Static heat dissipation, non-current-dependent Pvs W 0.45
Heat dissipation capacity Pdiss W 0
Operating ambient temperature min. °C -25
Operating ambient temperature max. °C 70
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard's requirements.
10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances Meets the product standard's requirements.
10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections Is the panel builder's responsibility.
10.8 Connections for external conductors Is the panel builder's responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strength Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material Is the panel builder's responsibility.
10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Lamp holder block for control circuit devices (EC000204)
03/02/2021 Eaton 218061 ED2021 V76.0 EN 2 / 3
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Bulb socket block for command and alarm devices
(ecl@ss10.0.1-27-37-12-09 [AKF027014])
Transformer integrated No
With integrated voltage decreasing resistor No
With light source Yes
With integrated diode Yes
Lamp holder None
Rated voltage Ue at AC 50 Hz V 12 - 30
Rated voltage Ue at AC 60 Hz V 12 - 30
Rated voltage Ue at DC V 12 - 30
Voltage type for actuating AC/DC
Lamp type LED
Connection type auxiliary circuit Spring clamp connection
Colour lamp Blue
Type of fastening Front fastening
Approvals
Product Standards IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking
UL File No. E29184
UL Category Control No. NKCR
CSA File No. 012528
CSA Class No. 3211-03
North America Certification UL listed, CSA certified
Degree of Protection UL/CSA Type: -
Dimensions
A = 39
Pushbutton with M22-(C)K…
Pushbutton with M22-(C) LED… + M22-XLED…
Additional product information (links)
IL04716002Z (AWA1160-1745) RMQ-Titan System
IL04716002Z (AWA1160-1745) RMQ-Titan
System
https://es-assets.eaton.com/DOCUMENTATION/AWA_INSTRUCTIONS/IL04716002Z2020_09.pdf
03/02/2021 Eaton Industries GmbH
http://www.eaton.eu
© 02/2021 by Eaton Industries GmbH
Eaton 218061 ED2021 V76.0 EN
3 / 3