MURS360-E3/57T/BKN - Vishay / Semiconductor

MURS340, MURS360

www.vishay.com Vishay General Semiconductor

Revision: 30-Oct-2018 1Document Number: 88816

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface Mount Ultrafast Plastic Rectifier

FEATURES

• Glass passivated pellet chip junction

• Ideal for automated placement

• Ultrafast reverse recovery time

• Low switching losses, high efficiency

• High forward surge capability

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

• AEC-Q101 qualified available

- Automotive ordering code: base P/NHE3 or P/NHM3

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in high frequency rectification and freewheeling

application in switching mode converters and inverters for

consumer, computer, automotive and telecommunication.

MECHANICAL DATA

Case: SMC (DO-214AB)

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/N-M3 - halogen-free, RoHS-compliant, commercial

grade

Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified

Base P/NHM3_X - halogen-free, RoHS-compliant, and

AEC-Q101 qualified

(“_X” denotes revision code e.g. A, B, .....)

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: color band denotes cathode end

PRIMARY CHARACTERISTICS

IF(AV) 3.0 A

VRRM 400 V, 600 V

IFSM 125 A

trr 50 ns

VF1.05 V

TJ max. 175 °C

Package SMC (DO-214AB)

Circuit configuration Single

SMC (DO-214AB)

Available

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL MURS340 MURS360 UNIT

Device marking code MG MJ

Maximum repetitive peak reverse voltage VRRM 400 600 V

Working peak reverse voltage VRWM 400 600 V

Maximum DC blocking voltage VDC 400 600 V

Maximum average forward rectified current at: (fig. 1) TL = 130 °C IF(AV)

3.0 A

TL = 115 °C 4.0

Peak forward surge current 8.3 ms single half sine-wave

superimposed on rated load IFSM 125 A

Operating junction and storage temperature range TJ, TSTG -65 to +175 °C

MURS340, MURS360

www.vishay.com Vishay General Semiconductor

Revision: 30-Oct-2018 2Document Number: 88816

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Pulse test: tp = 300 μs, duty cycle 2 %

Note

(1) AEC-Q101 qualified

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL MURS340 MURS360 UNIT

Maximum instantaneous forward voltage

IF = 3.0 A TJ = 25 °C VF (1)

1.25

VIF = 4.0 A 1.28

IF = 3.0 A TJ = 150 °C 1.05

Maximum instantaneous reverse current

at rated DC blocking voltage

TJ = 25 °C IR (1) 10 μA

TJ = 150 °C 250

Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns

Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/μs,

VR = 30 V, Irr = 10 % IRM trr 75 ns

Maximum forward recovery time IF = 1.0 A, dI/dt = 100 A/μs,

recovery to 1.0 V tfr 25 ns

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL MURS340 MURS360 UNIT

Typical thermal resistance junction to lead RJL 11 °C/W

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

MURS360-E3/57T 0.211 57T 850 7" diameter plastic tape and reel

MURS360-E3/9AT 0.211 9AT 3500 13" diameter plastic tape and reel

MURS360HE3_A/H (1) 0.211 H 850 7" diameter plastic tape and reel

MURS360HE3_A/I (1) 0.211 I 3500 13" diameter plastic tape and reel

MURS360-M3/57T 0.211 57T 850 7" diameter plastic tape and reel

MURS360-M3/9AT 0.211 9AT 3500 13" diameter plastic tape and reel

MURS360HM3_A/H (1) 0.211 H 850 7" diameter plastic tape and reel

MURS360HM3_A/I (1) 0.211 I 3500 13" diameter plastic tape and reel

MURS340, MURS360

www.vishay.com Vishay General Semiconductor

Revision: 30-Oct-2018 3Document Number: 88816

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve

Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Characteristics

Fig. 5 - Typical Junction Capacitance

Fig. 6 - Typical Reverse Switching Characteristics

25 50 75 100 125 150 175

Average Forward Current (A)

TL - Lead Temperature (°C)

100

125

150

1 10010

Average Forward Current (A)

Number of Cycles at 60 Hz

Instantaneous Forward Voltage (V)

0.1

100

0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1

Instantaneous Forward Current (A)

TJ = 150 °C

TJ = 125 °C

TJ = 25 °C

TJ = 100 °C

6040200 10080

Instantaneous Reverse Current (μA)

Percent of Rated Peak Reverse Voltage (%)

0.01

0.1

100

1000

TJ = 150 °C

TJ = 125 °C

TJ = 25 °C

TJ = 100 °C

Reverse Voltage (V)

Junction Capacitance (pF)

0.1 1

100

1000

25 50

75 100 125

100

120

1 A, 50 A/μs, 30 V

Junction Temperature (°C)

Stored Charge/Reverse Recovery

Time (nC/ns)

MURS340, MURS360

www.vishay.com Vishay General Semiconductor

Revision: 30-Oct-2018 4Document Number: 88816

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

Cathode Band

SMC (DO-214AB)

0.126 (3.20)

0.114 (2.90)

0.246 (6.22)

0.220 (5.59)

0.280 (7.11)

0.260 (6.60)

0.012 (0.305)

0.006 (0.152)

0.008 (0.2)

0 (0)

0.320 (8.13)

0.305 (7.75)

0.060 (1.52)

0.030 (0.76)

0.103 (2.62)

0.079 (2.06)

Mounting Pad Layout

0.126 (3.20) MIN.

0.060 (1.52) MIN.

0.185 (4.69) MAX.

0.320 (8.13) REF.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.