Sign In SHOP BLOG LEARN FORUMS 0 Items VIDEOS ROBOTICS & CNC / ROBOT KITS & CHASSIS / MINI-DIN CONNECTOR CABLE FOR IROBOT CREATE 2 - 7 PINS - 6 FEET Mini-DIN Connector Cable for iRobot Create 2 - 7 Pins - 6 feet PRODUCT ID: 2438 88 IN STOCK ADD TO CART 1 1-9 10-99 100+ ADD TO WISHLIST DESCRIPTION TECHNICAL DETAILS DESCRIPTION With this handy 7 Pin Mini-DIN Connector you can now jack into the hackport on your iRobot and control it with an Arduino or some other favorite microcontroller that has a 5V TTL UART! You can also power your project off of the internal Create 2's battery. Note that the battery voltage can be as high as ~21V so a buck converter such as this one could be good for getting the unregulated Vpwr from 20V down to a more reasonable 5V More information on the cable and what each pin is used for in the Create 2 Open Interface Specification The iRobot Create 2 is a time tested durable mobile robot platform built from remanufactured Roomba robots so instead of spending hours, or days, or weeks trying to build a functional robot and figuring out your power supplies and motors, just hack the iRobot! Check out the tutorials and guides over at iRobot Each order comes with a single cable, iRobot Create 2 not included TECHNICAL DETAILS Length: 180cm / 6' Weight: 75g Create 2 Serial to USB Cable Creation MAY WE ALSO SUGGEST... FTDI Serial TTL-232 USB Cable DISTRIBUTORS CONTACT SUPPORT DISTRIBUTORS iRobot Create(R) 2 Programmable Robot EXPAND TO SEE DISTRIBUTORS "Do well by doing good" - Benjamin Franklin EDUCATORS JOBS FAQ SHIPPING & RETURNS TERMS OF SERVICE PRIVACY & LEGAL ABOUT US ENGINEERED IN NYC Adafruit (R) 4.9