Vectron International
Headquarters
267 Lowell Road
Hudson, New Hampshire 03051
+1-888-328-7661 tel
+1-888-329-8328 fax
Vectron International LLC.
100 Watts Street
Mount Holly Springs, PA 17065
USA
+1-717-486-3411 tel
+1-717-486-5920 fax
Vectron international GmbH & Co. KG
Landstrasse
D-74924 Neckarbischofsheim
Germany
+49-07268-801-0 tel
+49-07268-801-281 fax
Vectron Asia Pacific Sales Office
Unit 3119 31st Floor, Jin Mao Tower, 88
Century Boulevard, Shanghai,
P.R. China 200120
+86 21 28909740 tel.
+86 21 28909240 fax
MIL-STD-202, Method 204, Condition G (30 G, 10Hz-2000Hz)
MIL-STD-202, Method 213, Condition I (100 G, 6ms, Sawtooth)
MIL-STD-883, Method 2001, Condition A (5000 G, Y1 Plane)
MIL-STD-883, Method 1010, Condition B
MIL-STD-883, Method 107, Condition B
Leak Test (Fine and Gross)
MIL-STD-883, Method 1014, Condition A1 and C1
Operable temperature range
Storage temperature range
Enclosures
E1 = Enable/Disable pin 1
E1 = Enable/Disable pin 1
E2 = Enable/Disable pin 2
Vectron International · www.vectron.com v.2019-01-16 · page 3 of 4 DAF
1 – Enable/Disable or N/C 3 – RF Output 1 – Enable/Disable or N/C 4 – RF Output
2 – Ground (case) 4 – Supply Voltage 2 – Enable/Disable or N/C 5 – Complementary Output
3 – Ground (Case) 6 – Supply Voltage
Note: Overall package thickness tolerance will be increase from +/- .007 to +/- .015 when I/O pads are solder coated.