HLMP-5029 Right Angle Mount Housing Data Sheet Description Features The HLMP-5029 is a black plastic right angle housing which mates with Avago high dome T-13/4 lamps. The leads should be prebent 90 as shown prior to snapping into the right angle housing. * Fits any Avago high dome T13/4 LED lamp The housing material is high temperature nylon capable of withstanding temperatures up to +150C. As an option, T-13/4 lamps may be ordered pre-mounted into the HLMP-5029 housing with leads bent down 90 and sheared to length, see table. To order, select the lamp base, part number and affix the desired option code. For example, the HLMP3301 HER lamp may be ordered premounted into the HLMP-5029 housing with leads shared to an even length. The part number for this option is: HLMP-3301-xxxB2. * Snap-in fit makes mounting simple * High contrast black plastic * May be ordered with mounted T-13/4 lamp as an option * Housing meets UL9V-0 flammability rating Physical Dimensions CATHODE LEAD LENGTH ANODE LEAD LENGTH B2 4.70 (0.185) 3.68 (0.145) 4.70 (0.185) 3.68 (0.145) SHEARED EVEN LEADS B1 20.32 (0.800) MIN. 1.27 (0.050) NOM. LONGER THAN CATHODE UNSHEARED UNEVEN LEADS OPTION NO. 0.345-0.365 NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. LEAD WIDTH MAY BE 0.45 (0.018) OR 0.64 (0.025) SQUARE NOMINAL DEPENDING UPON PRODUCT TYPE. 0.142-0.152 0.094-0.096 0.180-0.200 0.103-0.105 0.239-0.245 0.133 - 0.137 0.240-0.251 45 0.240-0.249 0.036-0.040 0.062-0.068 0.150-0.154 DIMENSIONS ARE IN INCHES. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright (c) 2008 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0600EN AV02-1005EN - January 18, 2008