BF 01/02/07/06/05/04: Radial Leads BQ 01/02/07/06/05/04 (Lead Free product available upon request) CPM-83----- pitch = 5.08mm (0.200") GENERAL DESCRIPTION Dielectric: Metallized polyester film (Polyethylene teraphtalate) Stacked-film Leads: Radial tin - plated wire Protection: Plastic case (UL 94: V-O) / Epoxy Resin Marking: Logo Nominal Capacitance Tolerance (EIA) DC Nominal Voltage Example: T 100nK 63 Delivery Mode: Bulk Taped (reel or ammopack) STANDARDIZATION Generic specifications: CEI 384-1/CECC 30000/UTE 83100 Sectional specifications: CEI 384-2/CECC 30400/UTE 83151 Complies with special specification: CECC 30401-063 APPLICATIONS e * Commodity Product: * Supply decoupling * Filter * Integrators * Treatment of analog signals * Rejection of line perturbations, etc. L max H max e max o 0.02 01 02 05 06 07 04 7.5 (0.295) 7.5 (0.295) 7.5 (0.295) 7.5 (0.295) 7.5 (0.295) 7.5 (0.295) 6.5 (0.256) 8.0 (0.315) 12.0 (0.472) 9.6 (0.378) 8.0 (0.315) 13.0 (0.512) 2.5 (0.098) 3.2 (0.126) 6.0 (0.236) 6.0 (0.236) 5.0 (0.197) 7.5 (0.295) 0.5 (0.020) 0.5 (0.020) 0.5 (0.020) 0.5 (0.020) 0.5 (0.020) 0.5 (0.020) H millimeters (inches) Case (0.024) 5.08 (0.200) -0.6 -0.1 (0.004) 4.10 (0.161) 0.5 (0.020) DIMENSIONS 0.4 (0.016) min L *L dimension measured 3mm above base of case HOW TO ORDER BF or BQ01 4 D 0104 K -- Type Class Voltage Capacitance Tolerance Suffix BF 01/02/07/06/05/04: Radial Leads BQ 01/02/07/06/05/04 (Lead Free product available upon request) CPM-83----- pitch = 5.08mm (0.200") PERFORMANCE CHARACTERISTICS Climatic Category Capacitance Range Tolerance on CR 55/100/56 Performance Class 2 CR 1nF to 2.2F (E12) 5%; 10% (other values on request) VR_ 63/100/250/400V VR~ 40/ 63/160/200V Vc = 0.8VR- at 100C Ve = 1.6VR-/2s at 25C Nominal Voltages Category Voltage Test Voltage * Tangent of Loss Angle: D.F. * Insulation Resistance: IR Measurement Frequency Capacitance DF: Performance Category 2 1kHz 100 Hz CR 1F CR> 1F 1.0% 1.0% Measuring Points CR <= 0.33F CR > 0.33F IR * CR min (M * F) Performance Class Performance Class 2 2 VRVRVRVR 100V > 100V 100V > 100V 3.75 7.5 1.25 2.5 30,000 IR min (G) Between Terminals Between Terminals and Ground * Max voltage gradient VR(dv/dt)R max PACKAGING Avisert 19.5 0.50 (0.768 0.020) 12.0 (0.472) 1.0 (0.039) 4.0 (0.157) 0.3 (0.012) 12.7 (0.500) 0.2 (0.008) 5.08 (0.200) Thermoadhesive tape (Other sizes according to standard CEI : 286-2) Dimensions: millimeters (inches) 18.0 (0.709) 0.5 (0.020) H 12.7 (0.500) 1.0 (0.039) 100 40 250 110 400 270 millimeters (inches) Panasert 16.5 0.30 (0.65 0.012) H 63 38 Case Reel Suffix DB x panasert 01 02 07 06 05 04 2500 1800 1200 900 900 750 DD avisert Quantity Ammopack DA DC panasert avisert 2500 2000 1250 1100 1100 750 Bulk USA Std. 1000 1000 1000 1000 1000 1000 -Europe / Asia Std. 5000 3800 2500 1500 1500 1000 BF 01/02/07/06/05/04: Radial Leads BQ 01/02/07/06/05/04 (Lead Free product available upon request) CPM-83----- pitch = 5.08mm (0.200") CAPACITANCE VALUES (CR) and NOMINAL VOLTAGES (VR) Capacitance Range (CR) 1,000 pF 1,200 1,500 1,800 2,200 pF 2,700 3,300 3,900 4,700 pF 5,600 6,800 8,200 10,000 pF 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 pF 56,000 68,000 82,000 100 nF 120 150 180 220 nF 270 330 390 470 nF 560 680 820 1 F 1.5 F 2.2 F Reference BF or BQ VR- / VR~ 63/40 (voltage code: D) 100/63 (voltage code: E) 250/160 (voltage code: G) 400/200 (voltage code: I) BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF02 or BQ02 BF02 or BQ02 BF02 or BQ02 BF02 or BQ02 BF07 or BQ07 BF07 or BQ07 BF07 or BQ07 BF07 or BQ07 BF05* or BQ05 BF05** or BQ05 *Upon request - no change **Upon request & only available 50 V (VR) - no change BF04/BF06: New BQ range: New BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF02 or BQ02 BF02 or BQ02 BF07 or BQ07 BF07 or BQ07 BF07 or BQ07 BF07 or BQ07 BF05* or BQ05 BF05* or BQ05 BF05* or BQ05 BF05 or BQ05 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF02 or BQ02 BF02 or BQ02 BF02 or BQ02 BF07 or BQ07 BF07 or BQ07 BF07 or BQ07 BF07 or BQ07 BF06 or BQ06 BF06 or BQ06 BF04 or BQ04 BF04 or BQ04 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF02 or BQ02 BF02 or BQ02 BF02 or BQ02 BF02 or BQ02 BF07 or BQ07 BF07 or BQ07 BF06 or BQ06 BF06 or BQ06 BF04 or BQ04 BF04 or BQ04 BF04 or BQ04 BF04 or BQ04 BJ 01/02/05/06/07: Lead Free product 5.08 Radial Leads 63/100/250/400 VMETALLIZED POLYESTER FILM CAPACITOR HIGH PERFORMANCES - HIGH TEMPERATURE PULSE APPLICATIONS Schematic Cross Section Schoop Metallized film APPLICATIONS e Non-inductive, self-healing, metallized polyester film capacitor, insulated* thermoplastic casing, epoxy resin sealed with stand-offs*. Radial connections with a lead spacing of 5.08 mm. Some examples of use: Supply decoupling, filter, integrators, treatment of analog signals, rejection of line perturbations, pulse logic and timing circuit, lamp capacitor for electronic compact lamps, inverter for LCD monitors, automotive DC motor suppression. STANDARDIZATION 5.08 (0.200) Generic specifications: CEI 384-1/CECC 30000/UTE 83100 Sectional specifications: CEI 384-2/CECC 30400/UTE 83151 On the LNZ list: Complies with type CPM-N RAQ2 production, equivalent AQAP-4 of NATO +0.6 (0.024) -0.1 (0.004) DIMENSIONS: Case L max. H max. 4.1 (0.161) 0.5 (0.020) * Flame retardant case according to UL 94 VO. H 0.4 (0.016). min L millimeters (inches) e max. o 0.02 Observations 01 7.5 (0.295) 6.5 (0.256) 2.5 (0.098) 0.5 (0.020) 02 7.5 (0.295) 8.0 (0.315) 3.2 (0.126) 0.5 (0.020) 6.8nF < Cr < 220nF 1nF < Cr < 150nF 05 7.5 (0.295) 12.0 (0.472) 6.0 (0.236) 0.5 (0.020) 47nF < Cr < 1500nF 06 7.5 (0.295) 9.6 (0.378) 6.0 (0.236) 0.5 (0.020) 33nF < Cr < 1000nF 07 7.5 (0.295) 8.0 (0.315) 5.0 (0.197) 0.5 (0.020) 22nF < Cr < 680nF HOW TO ORDER BJ01 4 D 0104 J -- Type Class Voltage Capacitance Value Tolerance Suffix MARKING T 100 nJ D Marking Nominal capacitance (EIA code) Tolerance (EIA code) DC nominal voltage Example above: D = 63 Vdc, 100nF, 5% BJ 01/02/05/06/07: Lead Free product 5.08 Radial Leads 63/100/250/400 VPERFORMANCE CHARACTERISTICS Climatic category: Capacitance range: Tolerances on Cr: Nominal voltages: 55/125/56 - Performance Class 1 Cr 1nF to 1500nF (E12) 5%, 10% (other values on request) Vr /63/100/250/400 V Vr /40/63/160/200 V 85C Vc = 0.8 Vr at 100C; 0.5Vr at 125C Ve = 1.6 Vr /2s at 25C dC/C 5% after 125C/2000h/0.625 Vr -55/+125C/time cycle 1 hr/5 cycles dC/C 8%; D.F. 1kHz 1% +40C/93% RH/56 days dC/C 5% Rated temperature: Category voltages: Test voltage: Life test: Thermal shock: Humidity test: * Tangent of Loss Angle: D.F. * Insulation Resistance: IR Measurement Frequency Capacitance DF: Performance Category 2 1kHz 100 Hz CR 1F CR> 1F 1.0% 1.0% Measuring Points CR <= 0.33F CR > 0.33F IR * CR min (M * F) Performance Class Performance Class 2 2 VRVRVRVR 100V > 100V 100V > 100V 3.75 7.5 1.25 2.5 30,000 IR min (G) Between Terminals Between Terminals and Ground * Max voltage gradient VR(dv/dt)R max PACKAGING 100 300 250 400 400 600 millimeters (inches) Panasert 16.5 0.30 (0.65 0.012) H 63 250 Avisert 19.5 0.50 (0.768 0.020) 12.0 (0.472) 1.0 (0.039) 4.0 (0.157) 0.3 (0.012) 12.7 (0.500) 0.2 (0.008) 5.08 (0.200) Thermoadhesive tape (Other sizes according to standard CEI : 286-2) Dimensions: millimeters (inches) 18.0 (0.709) 0.5 (0.020) H 12.7 (0.500) 1.0 (0.039) Case Reel Suffix DB x panasert 01 02 07 06 05 04 2500 1800 1200 900 900 750 DD avisert Quantity Ammopack DA DC panasert avisert 2500 2000 1250 1100 1100 750 Bulk USA Std. 1000 1000 1000 1000 1000 1000 -Europe / Asia Std. 5000 3800 2500 1500 1500 1000 BJ 01/02/05/06/07: Lead Free product 5.08 Radial Leads 63/100/250/400 VCHARACTERISTICS CURVES Nominal RMS Voltage vs. Frequency 63Vdc/40Vrms 100Vdc/63Vrms Vrms (V) Vrms (V) 100 100 0.01F 0.047F 1F 10 1 0.1 1 0.01F 0.047F 0.47F 10 f (KHz) 10 1 100 0.1 1 Vrms (V) 250Vdc/160Vrms 10 100 400Vdc/200Vrms Vrms(V) 1000 1000 100 100 0.0047F 0.0022F 0.047F 0.01F 0.033F 0.15F 10 10 0.1 1 10 f (KHz ) 0.1 100 1 10 Influence of the frequency on the impedance (room Temperature) 100 10 1 0.1 0.01 0.1 1 10 100 f (KHz) 100 BJ 01/02/05/06/07: Lead Free product 5.08 Radial Leads 63/100/250/400 VCAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) VS CASE SIZE Capacitance Range (CR) Reference BJ VR- /VR~ 63/40 100/63 250/160 400/200 1 BJ01 BJ01 BJ01 BJ01 1.5 BJ01 BJ01 BJ01 BJ01 2.2 BJ01 BJ01 BJ01 BJ01 3.3 BJ01 BJ01 BJ01 BJ01 4.7 BJ01 BJ01 BJ01 BJ01 6.8 BJ01 BJ01 BJ01 BJ02 10 BJ01 BJ01 BJ01 BJ02 15 BJ01 BJ01 BJ01 BJ02 22 BJ01 BJ01 BJ02 BJ07 33 BJ01 BJ01 BJ02 BJ06 47 BJ01 BJ01 BJ07 BJ05 68 BJ01 BJ01 BJ07 100 BJ01 BJ02 BJ06 150 BJ01 BJ07 BJ05 220 BJ01 BJ06 330 BJ02 BJ05 470 BJ02 BJ05 680 BJ07 1000 BJ06 1500 BJ05 BH 01/02/07/06/05: Radial Leads (Lead Free Product) CPM-N----- pitch = 5.08mm (0.200") GENERAL DESCRIPTION Dielectric: Metallized polyester film (Polyethylene teraphtalate) Stacked-film Leads: Radial tin - plated wire Protection: Plastic case (UL 94: V-O) / Epoxy Resin Marking: Logo DC Normal Voltage Nominial Capacitance Tolerance (EIA) Batch Code Number Example: T D474KC8L Delivery Mode: Bulk Taped (reel or ammopack) STANDARDIZATION millimeters (inches) Case L max H max e max o 0.02 01 02 05 06 07 7.5 (0.295) 7.5 (0.295) 7.5 (0.295) 7.5 (0.295) 7.5 (0.295) 6.5 (0.256) 8.0 (0.315) 12.0 (0.472) 9.6 (0.378) 8.0 (0.315) 2.5 (0.098) 3.2 (0.126) 6.0 (0.236) 6.0 (0.236) 5.0 (0.197) 0.5 (0.020) 0.5 (0.020) 0.5 (0.020) 0.5 (0.020) 0.5 (0.020) H L (0.024) 5.08 (0.200) -0.6 -0.1 (0.004) 4.10 (0.161) 0.5 (0.020) DIMENSIONS e * Supply decoupling * Filter * Integrators * Treatment of analog signals * Rejection of line perturbations, etc. Specifically designed of working in severe environmental conditions such as automotive applications: engine control, multiplexing, system, etc. 0.4 (0.016) min APPLICATIONS Generic specifications: CEI 384-1/CECC 30000/UTE 83100 Sectional specifications: CEI 384-2/CECC 30400/UTE 83151 On the LNZ List: Complies with type CPM-N RAQ2 production, equivalent AQAP-4 of NATO *L dimension measured 3mm above base of case HOW TO ORDER BH01 4 D 0104 K -- Type Class Voltage Capacitance Tolerance Suffix BH 01/02/07/06/05: Radial Leads (Lead Free Product) CPM-N----- pitch = 5.08mm (0.200") PERFORMANCE CHARACTERISTICS Climatic Category Capacitance Range Tolerance on CR 55/125/56 Performance Class 2 CR 1nF to 2.2mF (E12) 5%; 10% (other values on request) VR_ 63/100/250/400V VR~ 40/63/160/200V Vc = 0.8VR- at 100C & 0.5VR- at 125C Ve = 1.6VR-/2s at 25C Delta C/C<= 5% after 125C/1000h/0.5VR-55/+125C/time cycle 1hr/500 cycles delta C/C <=10% D.F. 1kHz<=1% 85C/85% HR/1000 h delta C/C <=10% Nominal Voltages Category Voltage Test Voltage Life Test Thermal Shock Humidity Test * Tangent of Loss Angle: D.F. * Insulation Resistance: IR Measurement Frequency Capacitance DF: Performance Category 2 1kHz 100 Hz CR 1F CR> 1F 1.0% 1.0% Measuring Points CR <= 0.33F CR > 0.33F IR * CR min (M * F) Performance Class Performance Class 2 2 VRVRVRVR 100V > 100V 100V > 100V 3.75 7.5 1.25 2.5 - 30,000 IR min (G) Between Terminals Between Terminals and Ground * Max voltage gradient VR(dv/dt)R max PACKAGING Avisert 19.5 0.50 (0.768 0.020) 12.0 (0.472) 1.0 (0.039) 4.0 (0.157) 0.3 (0.012) 12.7 (0.500) 0.2 (0.008) 5.08 (0.200) Thermoadhesive tape (Other sizes according to standard CEI : 286-2) Dimensions: millimeters (inches) 18.0 (0.709) 0.5 (0.020) H 12.7 (0.500) 1.0 (0.039) 100 40 250 110 400 270 millimeters (inches) Panasert 16.5 0.30 (0.65 0.012) H 63 38 Case Reel Suffix DB x panasert 01 02 07 06 05 2500 1800 1200 900 900 DD avisert Quantity Ammopack DA DC panasert avisert 2500 2000 1250 1100 1100 Bulk USA Std. 1000 1000 1000 1000 1000 -Europe / Asia Std. 5000 3800 2500 1500 1500 BH 01/02/07/06/05: Radial Leads (Lead Free Product) CPM-N----- pitch = 5.08mm (0.200") CAPACITANCE VALUES (CR) and NOMINAL VOLTAGES (VR) Capacitance Range (CR) Reference BH VR- / VR~ 63/40 (voltage code: D) 100/63 (voltage code: E) 250/160 (voltage code: G) 400/200 (voltage code: I) 1,000 pF 1,200 1,500 1,800 2,200 pF 2,700 3,300 3,900 4,700 pF 5,600 6,800 8,200 10,000 pF 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 pF 56,000 68,000 82,000 100 nF 120 150 180 220 nF 270 330 390 470 nF 560 680 820 1 F 1.5 F 2.2 F **Upon request & only available 50 V (VR) BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH02 BH02 BH07 BH07 BH07 BH07 BH07 BH07 BH05 BH05** BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH02 BH02 BH07 BH07 BH07 BH05 BH05 BH05 BH05 BH05 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH02 BH02 BH02 BH07 BH07 BH07 BH07 BH06 BH06 BH05 BH05 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH01 BH02 BH02 BH07 BH07 BH07 BH07 BH06 BH06 BH06 BH06 BH05 BH05 BN 07/10/15/22/27 CPM-85 - 7.5/10/15/22.5/27.5 (BT/BG/BO) APPLICATIONS * Commodity Product: * Decoupling with AC or pulse components * High current uses (TV deflection coils) * Capacitive dividers * Energy saving lamps, etc. TECHNOLOGY * Dielectric: Polyester film * Stacked-film for pitch 7.5, 10 & 15mm (63Vdc...400Vdc) Wound capacitor for pitch 7.5 & 10 & 15mm (630Vdc/1000Vdc) for pitch 22.5 & 27.5mm (63Vdc/1000Vdc) * Leads: Radial tinned copper wire * Protection: Plastic case (UL94: V-O) / Polyurethane resin * Marking: Logo Type Nominal Capacitance Tolerance (EIA) DC Nominal Voltage Example: T BN 47n J 400 * Delivery Mode: Bulk Taped (reel) Schematic Cross Section Schoop Metallized Film PERFORMANCE CHARACTERISTICS STANDARDIZATION Climatic Category: Capacitance Range: Tolerances on CR: Nominal Voltages: Generic specifications: CEI 384-1/CECC 30000/UTE 83100 Sectional specifications: CEI 384-2/CECC 30400/UTE 83151 55/125/56 Performance Class 2 CR 1 nF to 22 F (E6) 5%, 10%, 20% (other values on request) VR- 63/100/250/400/630/1000 V VR~ 40/63/115/200/220/450 V Vc = Un at 100C & 0.5 Un at 125C Ve = 1.6 Undc/2 s at 20C For lead length = 2mm Category Voltage: Test Voltage: Total Self Inductance (L): Pitch (mm) L (nH) 7.5 8 10 9 15 10 22.5 18 27.5 18 Tangent of Loss Angle at 1 kHz: D.F. 100.10-4 for C >0.1F 80.10-4 for C 0.1F Insulation Resistance: IR 3.75 G for C 0.33F IR (M) * C(F) 1250 s for C >0.33F measures at 10V for Un=63Vdc and 100V for others dv/dt: (V/sec) VR63 100 250 400 630 (dv/dt)R max pitch: 7.5mm (dv/dt)R max pitch: 10mm (dv/dt)R max pitch: 15mm (dv/dt)R max pitch: 22.5mm (dv/dt)R max pitch: 27.5mm Thermal Resistance: Pitch (mm) Case Rth (stacked) Rth (wound) 1 201 201 60 30 23 8 5 75 40 27 9 5 120 50 34 14 6 300 110 79 25 8 1000 440 112 102 25 15 800 400 380 340 Rth hot spot/ambient (C/W) 7.5mm 2 C 147 147 D 117 117 E0 140 140 10mm 4 5 124 90 124 90 6 88 123 15mm 9 10 61 82 86 75 11 64 22.5mm 12 13 53 48 16 P0 27.5mm 18 19 26 R68 42 40 33 27 23 30 1 BN 07/10/15/22/27 Pitch = 7.5mm / 10mm /15mm / 22.5mm / 27.5mm PACKAGING * Reel Lead Spacing: 10/15 (0.394/0.590) 4.0 (0.157) 0.3 (0.012) 18.0 (0.709) 0.5 (0.020) H 18.0 (0.709) 0.5 (0.020) H 6.0 (0.236) 0.2 (0.008) 6.0 (0.236) 0.2 (0.008) Lead Spacing: 7.5 (0.295) 12.7 (0.500) 0.2 (0.008) L.S. 4.0 (0.157) 0.3 (0.012) 12.7 (0.500) 0.2 (0.008) L.S. P Adhesive tape (Other sizes according to standard CEI : 286-2) Dimensions: millimeters (inches) Taping Suffix EN 7.5 (0.295) 12.7 1 (0.5 0.039) 16.5 0.3 (0.650 0.012) P H Lead Spacing Tol 0.4 (0.016) 10 (0.394) 15 (0.590) 25.4 1 (1.0 .0.039) 16 +1.5/-0.5 (0.600 +0.059/-0.020) * Bulk Suffix -- LG KB KC KE KH KK K3 K7 Leads Length 6mm +0/-1 3.2mm 0.4 3.5mm 0.5 4mm 0.5 5mm 0.5 9mm 0.5 15mm 0.5 20mm 1 25mm 1 Standard Suffix: - Special MOQ for these special suffix 2 BN 07/10/15/22/27 6 (0.236) - 1 (0.039) + 0 (0.000) L H e 0.4 (0.016) min Pitch = 7.5mm LS BN07 Pitch mm Ordering Code Vr-/Vr~ Cr Case Dimensions (mm) L max H max e max Reel Bulk(1) +10% -0.5 mm I2t (A2 .sec) Irms (A) MOQ 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 BN074D0683+- BN074D0104+- BN074D0224+- BN074D0334+- BN074D0474+- BN074D0684+- BN074D0105+- BN074D0225+- - 63/40 68nF 100nF 220nF 330nF 470nF 680nF 1F 2.2F 1 1 1 1 1 2 2 D 9.3 9.3 9.3 9.3 9.3 10.1 10.1 10.1 8.2 8.2 8.2 8.2 8.2 10.2 10.2 12.2 3.3 3.3 3.3 3.3 3.3 5.2 5.2 6.2 8000 8000 8000 8000 8000 10,000 10,000 8000 12,000 12,000 12,000 12,000 12,000 14,000 14,000 8000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 8.33 x 10-4 1.41 x 10-3 2.79 x 10-3 3.63 x 10-3 5.11 x 10-3 1.54 x 10-2 2.78 x 10-2 1.12 x 10-1 0.357 0.48 0.53 0.64 0.84 1.33 1.77 4 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 BN074E0333+- BN074E0473+- BN074E0104+- BN074E0224+- BN074E0334+- BN074E0474+- BN074E0684+- BN074E0105+- - 100/63 33nF 47nF 100nF 220nF 330nF 470nF 680nF 1F 1 1 1 1 2 2 C D 9.3 9.3 9.3 9.3 10.1 10.1 10.1 10.1 8.2 8.2 8.2 8.2 10.2 10.2 11.2 12.2 3.3 3.3 3.3 3.3 5.2 5.2 5.2 6.2 8000 8000 8000 8000 10,000 10,000 10,000 8000 12,000 12,000 12,000 12,000 14,000 14,000 12,000 8000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 4.52 x 10-4 6.12 x 10-4 1.41 x 10-3 2.79 x 10-3 7.85 x 10-3 1.27 x 10-2 2.23 x 10-2 4.61 x 10-2 0.21 0.29 0.48 0.53 1.00 1.16 1.48 2.18 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 BN074G0472+- BN074G0682+- BN074G0103+- BN074G0223+- BN074G0333+- BN074G0473+- BN074G0104+- BN074G0224+- - 250/115 4.7nF 6.8nF 10nF 22nF 33nF 47nF 100nF 220nF 1 1 1 1 1 1 2 D 9.3 9.3 9.3 9.3 9.3 9.3 10.1 10.1 8.2 8.2 8.2 8.2 8.2 8.2 10.2 12.2 3.3 3.3 3.3 3.3 3.3 3.3 5.2 6.2 8000 8000 8000 8000 8000 8000 10,000 8000 12,000 12,000 12,000 12,000 12,000 12,000 14,000 8000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 6.88 x 10-5 9.61 x 10-4 2.45 x 10-4 3.62 x 10-4 4.52 x 10-4 6.11 x 10-4 1.85 x 10-3 8.93 x 10-3 0.05 0.08 0.14 0.19 0.21 0.29 0.53 1.53 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 BN074I0102+- BN074I0222+- BN074I0332+- BN074I0472+- BN074I0103+- BN074I0223+- BN074I0333+- BN074I0473+- BN074I0683+- BN074I0823+- - 400/200 1nF 2.2nF 3.3nF 4.7nF 10nF 22nF 33nF 47nF 68nF 82nF 1 1 1 1 1 1 2 2 C D 9.3 9.3 9.3 9.3 9.3 9.3 10.1 10.1 10.1 10.1 8.2 8.2 8.2 8.2 8.2 8.2 10.2 10.2 11.2 12.2 3.3 3.3 3.3 3.3 3.3 3.3 5.2 5.2 5.2 6.2 8000 8000 8000 8000 8000 8000 10,000 10,000 10,000 8000 12,000 12,000 12,000 12,000 12,000 12,000 14,000 14,000 12,000 8000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 1.10 x 10-5 3.63 x 10-5 5.09 x 10-5 6.88 x 10-5 2.45 x 10-4 3.62 x 10-4 1.44 x 10-3 1.65 x 10-3 3.46 x 10-3 5.03 x 10-3 0.02 0.03 0.04 0.05 0.14 0.19 0.38 0.40 0.59 0.71 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 BN074K0102+- BN074K0152+- BN074K0222+- BN074K0332+- BN074K0472+- BN074K0682+- BN074K0103+- BN074K0153+- BN074K0223+- BN074K0273+- - 630/220 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 27nF 1 1 1 1 1 2 2 C D D 9.3 9.3 9.3 9.3 9.3 10.1 10.1 10.1 10.1 10.1 8.2 8.2 8.2 8.2 8.2 10.2 10.2 11.2 12.2 12.2 3.3 3.3 3.3 3.3 3.3 5.2 5.2 5.2 6.2 6.2 8000 8000 8000 8000 8000 10,000 10,000 10,000 8000 8000 12,000 12,000 12,000 12,000 12,000 14,000 14,000 12,000 8000 8000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 9.0 x 10-7 2.0 x 10-6 2.3 x 10-6 2.5 x 10-6 5.7 x 10-6 1.2 x 10-5 2.6 x 10-5 5.8 x 10-5 1.2 x 10-4 1.8 x 10-4 0.027 0.027 0.027 0.027 0.027 0.14 0.14 0.22 0.34 0.34 Replace the + by the tolerance code: J=5% - K=10% - M=20% Replace the - - by the packaging suffix: - - = standard bulk - EN = taping on reel (1) : MOQ for standard bulk suffix - - etc 3 BN 07/10/15/22/27 Pitch = 10mm BN10 Pitch mm Ordering Code Vr-/Vr~ Cr Case Dimensions (mm) L max H max e max Bulk(1) +10% -0.5 mm I2t (A2 .sec) Irms (A) 10 10 10 10 10 10 10 BN104D0224+- BN104D0334+- BN104D0474+- BN104D0684+- BN104D0105+- BN104D0155+- BN104D0225+- - 63/40 220nF 330nF 470nF 680nF 1F 1.5F 2.2F E0 E0 E0 E0 E0 4 5 12.7 12.7 12.7 12.7 12.7 12.7 12.7 9.2 9.2 9.2 9.2 9.2 10.2 13.6 4.2 4.2 4.2 4.2 4.2 5.2 5.2 6800 6800 6800 6800 6800 5600 5600 14,000 14,000 14,000 14,000 14,000 10,000 8000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 2.20 x 10-3 3.54 x 10-3 5.74 x 10-3 6.84 x 10-3 1.11 x 10-2 2.50 x 10-2 5.37 x 10-2 0.71 0.73 0.765 0.837 1.23 1.83 2.685 10 10 10 10 10 10 10 10 BN104E0683+- BN104E0104+- BN104E0154+- BN104E0224+- BN104E0334+- BN104E0474+- BN104E0684+- BN104E0105+- - 100/63 68nF 100nF 150nF 220nF 330nF 470nF 680nF 1000nF E0 E0 E0 E0 E0 E0 4 5 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 9.2 9.2 9.2 9.2 9.2 9.2 10.2 13.6 4.2 4.2 4.2 4.2 4.2 4.2 5.2 5.2 6800 6800 6800 6800 6800 6800 5600 5600 14,000 14,000 14,000 14,000 14,000 14,000 10,000 8000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 8.74 x 10-4 1.33 x 10-3 1.47 x 10-3 2.20 x 10-3 3.54 x 10-3 5.74 x 10-3 1.20 x 10-2 2.60 x 10-2 0.32 0.40 0.667 0.71 0.73 0.765 1.107 1.629 10 10 10 10 10 10 10 10 BN104G0333+- BN104G0473+- BN104G0683+- BN104G0104+- BN104G0154+- BN104G0224+- BN104G0334+- BN104G0474+- - 250/115 33nF 47nF 68nF 100nF 150nF 220nF 330nF 470nF E0 E0 E0 E0 E0 4 4 5 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 9.2 9.2 9.2 9.2 9.2 10.2 10.2 13.6 4.2 4.2 4.2 4.2 4.2 5.2 5.2 5.2 6800 6800 6800 6800 6800 5600 5600 5600 14,000 14,000 14,000 14,000 14,000 10,000 10,000 8000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 4.86 x 10-4 6.01 x 10-4 8.74 x 10-4 1.33 x 10-3 1.47 x 10-3 3.16 x 10-3 7.11 x 10-3 1.44 x 10-2 0.21 0.26 0.32 0.4 0.5 0.73 1.1 1.57 10 10 10 10 10 10 10 10 10 BN104I0472+- BN104I0682+- BN104I0103+- BN104I0153+- BN104I0223+- BN104I0333+- BN104I0473+- BN104I0683+- BN104I0104+- - 400/200 4.7nF 6.8nF 10nF 15nF 22nF 33nF 47nF 68nF 100nF E0 E0 E0 E0 E0 E0 E0 4 5 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 9.2 9.2 9.2 9.2 9.2 9.2 9.2 10.2 13.6 4.2 4.2 4.2 4.2 4.2 4.2 4.2 5.2 5.2 6800 6800 6800 6800 6800 6800 6800 5600 5600 14,000 14,000 14,000 14,000 14,000 14,000 14,000 10,000 8000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 6.03 x 10-5 9.96 x 10-5 1.13 x 10-4 1.70 x 10-4 3.31 x 10-4 4.66 x 10-4 6.01 x 10-4 1.26 x 10-3 2.72 x 10-3 0.043 0.07 0.088 0.129 0.157 0.213 0.26 0.35 0.52 10 10 10 10 10 10 10 BN104K0472+- BN104K0682+- BN104K0103+- BN104K0153+- BN104K0223+- BN104K0333+- BN104K0473+- - 630/220 4.7nF 6.8nF 10nF 15nF 22nF 33nF 47nF E0 E0 E0 E0 4 4 5 12.7 12.7 12.7 12.7 12.7 12.7 12.7 9.2 9.2 9.2 9.2 10.2 10.2 13.6 4.2 4.2 4.2 4.2 5.2 5.2 5.2 6800 6800 6800 6800 5600 5600 5600 14,000 14,000 14,000 14,000 10,000 10,000 8000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 2.16 x 10-5 4.53 x 10-5 9.74 x 10-5 2.20 x 10-4 4.74 x 10-4 7.41 x 10-4 9.16 x 10-4 0.05 0.07 0.08 0.10 0.14 0.18 0.24 10 10 10 10 10 10 BN104L0102+- BN104L0152+- BN104L0222+- BN104L0332+- BN104L0472+- BN104L0682+- - 1000/450 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF E0 E0 E0 4 5 5 12.7 12.7 12.7 12.7 12.7 12.7 9.2 9.2 9.2 10.2 13.6 13.6 4.2 4.2 4.2 5.2 5.2 5.2 6800 6800 6800 5600 5600 5600 14,000 14,000 14,000 10,000 8000 8000 0.6 0.6 0.6 0.6 0.6 0.6 1.8 x 10-5 4.00 x 10-5 7.00 x 10-5 1.24 x 10-4 2.51 x 10-4 5.26 x 10-4 0.05 0.05 0.08 0.14 0.22 0.26 Replace the + by the tolerance code: J=5% - K=10% - M=20% Replace the - - by the packaging suffix: - - = standard bulk - EN = taping on reel (1) : MOQ for standard bulk suffix - - 4 MOQ Reel etc BN 07/10/15/22/27 Pitch = 15mm BN15 Pitch mm Ordering Code Vr-/Vr~ Cr Case Dimensions (mm) L max H max e max Reel Bulk(1) +10% -0.5 mm I2t (A2 .sec) Irms (A) MOQ 15 15 15 15 15 15 15 15 BN154D0684+- BN154D0105+- BN154D0155+- BN154D0225+- BN154D0335+- BN154D0475+- BN154D0685+- BN154D0825+- - 63/40 680nF 1F 1.5F 2.2F 3.3F 4.7F 6.8F 8.2F 6 6 6 6 I0 9 9 9 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 10.6 10.6 10.6 10.6 12.2 14.6 14.6 14.6 5.2 5.2 5.2 5.2 6.2 8.7 8.7 8.7 4000 4000 4000 4000 4000 2500 2500 2500 6000 6000 6000 6000 6000 8000 8000 8000 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.22 x 10-2 2.12 x 10-2 3.60 x 10-2 4.38 x 10-2 9.86 x 10-2 4.19 x 10-1 2.00 x 10-1 6.09 x 10-1 0.83 0.96 1.43 1.783 2.674 3.808 5.50 6.200 15 15 15 15 15 15 15 15 15 BN154E0154+- BN154E0224+- BN154E0334+- BN154E0474+- BN154E0105+- BN154E0155+- BN154E0225+- BN154E0335+- BN154E0475+- - 100/63 150nF 220nF 330nF 470nF 1F 1.5F 2.2F 3.3F 4.7F 6 6 6 6 6 6 I0 9 9 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 10.6 10.6 10.6 10.6 10.6 10.6 12.2 14.6 14.6 5.2 5.2 5.2 5.2 5.2 5.2 6.2 8.7 8.7 4000 4000 4000 4000 4000 4000 4000 2500 2500 6000 6000 6000 6000 6000 6000 6000 8000 8000 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 4.35 x 10-3 5.53 x 10-3 1.13 x 10-2 1.33 x 10-2 1.71 x 10-2 3.60 x 10-2 8.20 x 10-2 1.85 x 10-1 3.74 x 10-1 0.43 0.64 0.72 0.96 0.96 1.43 2.111 3.168 4.51 15 15 15 15 15 15 15 15 BN154G0104+- BN154G0154+- BN154G0224+- BN154G0334+- BN154G0474+- BN154G0684+- BN154G0105+- BN154G0155+- - 250/115 100nF 150nF 220nF 330nF 470nF 680nF 1F 1.5F 6 6 6 6 6 I0 9 9 17.7 17.7 17.7 17.7 17.7 17.7 17.7 17.7 10.6 10.6 10.6 10.6 10.6 12.2 14.6 14.6 5.2 5.2 5.2 5.2 5.2 6.2 8.7 8.7 4000 4000 4000 4000 4000 4000 2500 2500 6000 6000 6000 6000 6000 6000 8000 8000 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 2.58 x 10-3 4.35 x 10-3 5.57 x 10-3 7.51 x 10-3 1.17 x 10-2 2.44 x 10-2 5.28 x 10-2 1.19 x 10-1 0.38 0.43 0.64 0.72 1.024 1.483 2.178 3.267 15 15 15 15 15 15 15 BN154I0473+- BN154I0683+- BN154I0104+- BN154I0154+- BN154I0224+- BN154I0334+- BN154I0474+- - 400/200 47nF 68nF 100nF 150nF 220nF 330nF 470nF 6 6 6 6 I0 9 9 17.7 17.7 17.7 17.7 17.7 17.7 17.7 10.6 10.6 10.6 10.6 12.2 14.6 14.6 5.2 5.2 5.2 5.2 6.2 8.7 8.7 4000 4000 4000 4000 4000 2500 2500 6000 6000 6000 6000 6000 8000 8000 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.19 x 10-3 1.59 x 10-3 2.58 x 10-3 4.35 x 10-3 9.37 x 10-3 2.11 x 10-2 4.27 x 10-2 0.191 0.28 0.38 0.43 0.70 1.05 1.50 15 15 15 15 15 BN154K0333+- BN154K0473+- BN154K0683+- BN154K0104+- BN154K0154+- - 630/220 33nF 47nF 68nF 100nF 150nF 6 6 I0 I0 9 17.7 17.7 17.7 17.7 17.7 10.6 10.6 12.2 12.2 14.6 5.2 5.2 6.2 6.2 8.7 4000 4000 4000 4000 2500 6000 6000 6000 6000 8000 0.8 0.8 0.8 0.8 0.8 4.90 x 10-4 8.73 x 10-4 4.11 x 10-3 4.50 x 10-3 1.00 x 10-2 0.14 0.20 0.32 0.46 0.70 15 15 15 15 BN154L0682+- BN154L0103+- BN154L0223+- BN154L0333+- - 1000/450 6.8nF 10nF 22nF 33nF 6 6 9 9 17.7 17.7 17.7 17.7 10.6 10.6 14.6 14.6 5.2 5.2 8.7 8.7 4000 4000 2500 2500 6000 6000 6000 8000 0.8 0.8 0.8 0.8 1.11 x 10-4 2.41 x 10-4 1.17 x 10-3 2.62 x 10-3 0.14 0.22 0.60 0.76 Replace the + by the tolerance code: J=5% - K=10% - M=20% Replace the - - by the packaging suffix: - - = standard bulk - EN = taping on reel (1) : MOQ for standard bulk suffix - - etc 5 BN 07/10/15/22/27 Pitch = 22.5mm/27.5mm BN22 Pitch mm Pitch = 22.5mm Ordering Code Vr-/Vr~ Cr Case Dimensions (mm) L max H max e max Bulk(1) +10% -0.5 mm I2t (A2 .sec) Irms (A) MOQ Reel 22.5 22.5 22.5 BN224D0685+- BN224D0106+- BN224D0156+- - 63/40 6.8F 10F 15F 11 12 13 26.7 26.7 26.7 15.2 17.6 19.6 7.7 7.7 10.2 1600 1600 1200 0.8 0.8 0.8 1.39 x 10-1 3.01 x 10-1 6.77 x 10-1 2.09 3.07 4.6 22.5 22.5 22.5 22.5 22.5 BN224E0225+- BN224E0335+- BN224E0475+- BN224E0685+- BN224E0825+- - 100/63 2.2F 3.3F 4.7F 6.8F 8.2F 11 11 11 13 13 26.7 26.7 26.7 26.7 26.7 15.2 15.2 15.2 19.6 19.6 7.7 7.7 7.7 10.2 10.2 1600 1600 1600 1200 1200 0.8 0.8 0.8 0.8 0.8 2.59 x 10-2 5.82 x 10-2 1.18 x 10-1 2.47 x 10-1 3.59 x 10-1 1.08 1.60 2.30 3.30 4.00 22.5 22.5 22.5 22.5 BN224G0105+- BN224G0155+- BN224G0225+- BN224G0335+- - 250/115 1F 1.5F 2.2F 3.3F 11 11 12 13 26.7 26.7 26.7 26.7 15.2 15.2 17.6 19.6 7.7 7.7 7.7 10.2 1600 1600 1600 1200 0.8 0.8 0.8 0.8 1.64 x 10-2 3.68 x 10-2 7.92 x 10-1 1.78 x 10-1 1.14 1.71 2.50 3.74 22.5 22.5 22.5 22.5 22.5 BN224I0334+- BN224I0474+- BN224I0684+- BN224I0105+- BN224I0155+- - 400/200 330nF 470nF 680nF 1F 1.5F 11 11 11 12 13 26.7 26.7 26.7 26.7 26.7 15.2 15.2 15.2 17.6 19.6 7.7 7.7 7.7 7.7 10.2 1600 1600 1600 1600 1200 0.8 0.8 0.8 0.8 0.8 3.64 x 10-3 7.38 x 10-3 1.54 x 10-2 3.34 x 10-2 7.52 x 10-2 0.383 0.54 0.80 1.16 1.75 22.5 22.5 22.5 22.5 22.5 BN224K0154+- BN224K0224+- BN224K0334+- BN224K0474+- BN224K0564+- - 630/220 150nF 220nF 330nF 470nF 560nF 11 11 12 13 13 26.7 26.7 26.7 26.7 26.7 15.2 15.2 17.6 19.6 19.6 7.7 7.7 7.7 10.2 10.2 1600 1600 1600 1200 1200 0.8 0.8 0.8 0.8 0.8 2.17 x 10-3 4.66 x 10-3 1.05 x 10-2 2.13 x 10-2 3.02 x 10-2 0.38 0.54 0.74 1.18 1.40 22.5 22.5 22.5 22.5 22.5 BN224L0333+- BN224L0473+- BN224L0683+- BN224L0104+- BN224L0124+- - 1000/450 33nF 47nF 68nF 100nF 120nF 11 11 12 13 13 26.7 26.7 26.7 26.7 26.7 15.2 15.2 17.6 19.6 19.6 7.7 7.7 7.7 10.2 10.2 1600 1600 1600 1200 1200 0.8 0.8 0.8 0.8 0.8 2.64 x 10-3 5.35 x 10-3 1.12 x 10-2 2.42 x 10-2 3.49 x 10-2 0.28 0.40 0.60 0.86 1.00 Bulk(1) +10% -0.5 mm I2t (A2 .sec) Irms (A) Replace the + by the tolerance code : J=5% - K=10% - M=20% Replace the - - by the packaging suffix : - - = standard bulk - EN = taping on reel (1) : MOQ for standard bulk suffix - - etc BN27 Pitch mm Pitch = 27.5mm Ordering Code Vr-/Vr~ Cr Case Dimensions (mm) L max H max e max Reel 27.5 27.5 BN274D0156+- BN274D0206+- - 63/40 15F 20F 16 16 31.7 31.7 19.6 19.6 10.2 10.2 960 960 0.8 0.8 4.07 x 10-1 7.24 x 10-1 3.57 4.80 27.5 27.5 27.5 BN274E0825+- BN274E0106+- BN274E0126+- - 100/63 8.2F 10F 12F 16 16 16 31.7 31.7 31.7 19.6 19.6 19.6 10.2 10.2 10.2 960 960 960 0.8 0.8 0.8 2.16 x 10-1 3.22 x 10-1 4.63 x 10-1 3.12 3.80 4.56 27.5 27.5 27.5 27.5 27.5 27.5 27.5 BN274G0335+- BN274G0395+- BN274G0475+- BN274G0685+- BN274G0106+- BN274G0156+- BN274G0226+- - 250/115 3.3F 3.9F 4.7F 6.8F 10F 15F 22F * 16 16 P0 P0 18 26 R68 31.7 31.7 31.7 31.7 31.7 31.7 32 19.6 19.6 22.6 22.6 26.2 31.6 37 10.2 10.2 13.7 13.7 15.2 21.2 22 960 960 1600 1600 1280 448 448 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.07 x 10-1 1.50 x 10-1 2.18 x 10-1 4.56 x 10-1 9.85 x 10-1 2.77 5.96 2.9 3.42 4.17 6.00 6.20 6.20 6.20 27.5 27.5 27.5 27.5 27.5 27.5 BN274I0155+- BN274I0225+- BN274I0335+- BN274I0475+- BN274I0685+- BN274I0106+- - 400/200 1.5F 2.2F 3.3F 4.7F 6.8F 10F * 16 P0 P0 18 19 R68 31.7 31.7 31.7 31.7 31.7 32 19.6 22.6 22.6 26.2 30.2 37 10.2 13.7 13.7 15.2 17.7 22 960 1600 1600 1280 1040 448 0.8 0.8 0.8 0.8 0.8 0.8 4.52 x 10-2 9.73 x 10-2 2.19 x 10-1 4.44 x 10-1 9.30 x 10-1 2.01 1.43 1.98 2.98 4.23 6.10 6.20 27.5 27.5 27.5 27.5 27.5 27.5 BN274K0564+- BN274K0684+- BN274K0105+- BN274K0225+- BN274K0335+- BN274K0435+- - 630/220 560nF 680nF 1F 2.2F 3.3F * 4.3F * 16 16 P0 19 R68 R68 31.7 31.7 31.7 31.7 32 32 19.6 19.6 22.6 30.2 37 37 10.2 10.2 13.7 17.7 22 22 960 960 1600 1040 448 448 0.8 0.8 0.8 0.8 0.8 0.8 1.77 x 10-2 2.61 x 10-2 5.69 x 10-2 2.73 x 10-1 6.14 x 10-1 1.04 1.61 1.70 1.90 4.20 6.20 6.20 27.5 27.5 27.5 27.5 27.5 27.5 BN274L0124+- BN274L0224+- BN274L0334+- BN274L0474+- BN274L0684+- BN274L0914+- - 1000/450 120nF 220nF 330nF 470nF 680nF 910nF * 16 P0 18 19 26 R68 31.7 31.7 31.7 31.7 31.7 32 19.6 22.6 26.2 30.2 31.6 37 10.2 13.7 15.2 17.7 21.2 22 960 1600 1280 1040 448 448 0.8 0.8 0.8 0.8 0.8 0.8 1.82 x 10-2 6.12 x 10-2 1.38 x 10-1 2.79 x 10-3 5.85 x 10-3 1.05 0.76 1.38 2.08 2.96 4.28 5.72 *only available standard bulk: no special lead length Replace the + by the tolerance code: J=5% - K=10% - M=20% Replace the - - by the packaging suffix: - - = standard bulk - EN = taping on reel For values biggers -> see FFB range (1) : MOQ for standard bulk suffix - - 6 MOQ etc BW 15: TIP & RING 15 Radial leads-250 VDESCRIPTION Non inductive, stacked, self healing, metallised polyester film capacitor. Insulated thermoplastic casing, polyurethane resin sealed. Radial connections. Also available in SMD version. (see below) APPLICATIONS AVX's TIP & RING or ringer metallised polyester film capacitors are designed as a standard telecom filter to block -48 Volts DC telephone line voltage and pass subscriber's AC signal pulse (16 to 25 Hz, 70 to 90 Vrms). The typical ringing Signal is shown in the enclosed figure. The ringer film capacitors are ideal for telecom/modem applications. This is a complement range to the AVX's ceramic one. STANDARDISATION Generic specifications: CEI 384-1/CECC 30000/UTE 83100 Sectional specifications: CEI 384-2/CECC 30400/UTE 83151 DIMENSIONS AND CAPACITANCE VALUES millimeters (inches) DIMENSIONS L max 15 6 7 7 8 9 9 DV/DT I2t 2 (V/sec) (A .sec) (mm) Size Case H max 17,5(0,689) 17,5(0,689) 17,5(0,689) 17,5(0,689) 17,5(0,689) 17,5(0,689) e max 10,50(0,413) 13,5(0,531) 13,5(0,531) 13,5(0,531) 14,5(0,571) 14,5(0,571) LS 0,4 5(0,197) 5(0,197) 5(0,197) 6,25(0,246) 8,50(0,335) 8,50(0,335) O +10%-0,05 15(0,591) 15(0,591) 15(0,591) 15(0,591) 15(0,591) 15(0,591) 0,80(0,031) 0,80(0,031) 0,80(0,031) 0,80(0,031) 0,80(0,031) 0,80(0,031) Capacitance 430 300 300 300 50 50 HOW TO ORDER BW15 Type 4 G 0105 K Class Voltage Capacitance Value Tolerance PET 250V EIA code 10% Ur-/Ur~ 250/100 Suffix 0,166 0,183 0,276 0,405 0,159 0,336 470 nF 680 nF 820 nF 1F 1,5F 2,2F BW 15: TIP & RING 15 Radial leads-250 VPERFORMANCE CHARACTERISTICS Climatic category Capacitance (Cr) Tolerance Nominal voltage Test voltage (1.4Ur-2sec) Category voltage Tangent of loss angle at 1Khz (DF) Insulation resistance between terminals under 100VInsulation resistance between terminals and case SUFFIX -- EN Description Connections Tapereel bulk length= 6mm0.5 MARKING Logo 55 / 100 / 56 See table 5% 10 % 250 V350 VUr at 100C < 80. 10-4 Ir * C> 1 Gohm F > 30 Gohms LG KB T BW 1 0 K Type 250 V- Nominal capacitance Tolerance(EIA code) DC nominal voltage KH K7 Connections Connections bulk length= bulk length= bulk length= bulk length= bulk length= bulk length= Connections Connections 3.2mm0.4 3.5mm0.5 KC KE Connections Connections 4mm0.5 5mm0.5 SCHEMATIC DRAWING 9mm0.5 0.8 15 0.4 6+0/-1 25mm1 0.2 mini Height Length TIP&RING GRAPH MOQ= primary packaging 250V Tip & Ring 0 -48V -250V -400ms 200ms/div 1.6s Size Case Reel (EN) Minimum Bulk (--) Quantity 15 15 15 15 6 7 8 9 4000 4000 3332 2500 6000 6000 6000 8000 BW 15: TIP & RING 15 Radial leads-250 VFILM CHIP CAPACITORS TIP&RING film chip capacitors are designed also as a standard telecom filter 470 nF 680 nF 820 nF 1 F 1.5 F Standard range Extended range 0474 0684 0824 0105 0155 Size Code 5040/4030 6054/5040 6054/5040 6054/5040 6054 H max 4.6/5.5 4.4/4.6 5/5.7 5.7/6.6 5.9 PART NUMBER SCHEME CF 18 2 G 0105 K Type Size Equivalent Class Voltage 250 V =G Capacitance Value 10%=K Tolerance 2=PET HT Suffix code EIA PERFORMANCE CHARACTERISTICS AND PACKAGING: see catalog film chip capacitors NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures are indicated or that other measures may not be required. Specifications are typical and many not apply to all applications.