BN104L0102J - AVX Corporation

HOW TO ORDER

BF or BQ01 4 D 0104 K - -

Type Class Voltage Capacitance Tolerance Suffix

BF 01/02/07/06/05/04: Radial Leads

BQ 01/02/07/06/05/04 (Lead Free product available upon request)

CPM-83----- pitch = 5.08mm (0.200")

GENERAL DESCRIPTION

Dielectric: Metallized polyester film (Polyethylene teraphtalate)

Stacked-film

Leads: Radial tin - plated wire

Protection: Plastic case (UL 94: V-O) / Epoxy Resin

Marking: Logo

Nominal Capacitance

Tolerance (EIA)

DC Nominal Voltage

Example: T 100nK 63

Delivery Mode: Bulk

Taped (reel or ammopack)

STANDARDIZATION

Generic specifications:

CEI 384-1/CECC 30000/UTE 83100

Sectional specifications:

CEI 384-2/CECC 30400/UTE 83151

Complies with special specification:

CECC 30401-063

APPLICATIONS

• Commodity Product:

• Supply decoupling

• Filter

• Integrators

• Treatment of analog signals

• Rejection of line perturbations, etc.

0.4 (0.016) min

5.08 (0.200) -0.6 (0.024)

-0.1 (0.004)

4.10 (0.161)

±0.5 (0.020)



*L dimension measured 3mm above base of case

Case L max H max e max ø ± 0.02

01 7.5 (0.295) 6.5 (0.256) 2.5 (0.098) 0.5 (0.020)

02 7.5 (0.295) 8.0 (0.315) 3.2 (0.126) 0.5 (0.020)

05 7.5 (0.295) 12.0 (0.472) 6.0 (0.236) 0.5 (0.020)

06 7.5 (0.295) 9.6 (0.378) 6.0 (0.236) 0.5 (0.020)

07 7.5 (0.295) 8.0 (0.315) 5.0 (0.197) 0.5 (0.020)

04 7.5 (0.295) 13.0 (0.512) 7.5 (0.295) 0.5 (0.020)

DIMENSIONS millimeters (inches)

12.7 (0.500)

±0.2 (0.008)

12.7 (0.500)

±1.0 (0.039)

12.0 (0.472)

±1.0 (0.039)

18.0 (0.709)

±0.5 (0.020)

4.0 (0.157)

±0.3 (0.012)

5.08 (0.200)

Thermoadhesive tape

(Other sizes according to standard CEI : 286-2)

Dimensions: millimeters (inches)



BF 01/02/07/06/05/04: Radial Leads

BQ 01/02/07/06/05/04 (Lead Free product available upon request)

CPM-83----- pitch = 5.08mm (0.200")

Case Quantity

Reel Ammopack Bulk

Suffix DB DD DA DC - -

xpanasert avisert panasert avisert USA Std. Europe /

Asia

Std.

01 2500 2500 1000 5000

02 1800 2000 1000 3800

07 1200 1250 1000 2500

06 900 1100 1000 1500

05 900 1100 1000 1500

04 750 750 1000 1000

Panasert Avisert

H16.5 ± 0.30 19.5 ± 0.50

(0.65 ± 0.012) (0.768 ± 0.020)

Measurement Capacitance DF:

Frequency Performance

Category 2

1kHz CR≤1µF ≤1.0%

100 Hz CR> 1µF ≤1.0%

Measuring CR<= 0.33µF CR> 0.33µF

Points

IR min (GΩ)IR * CRmin

(MΩ* µF)

Performance Class Performance Class

Between VR-VR-VR-VR-

Terminals ≤100V > 100V ≤100V > 100V

3.75 7.5 1.25 2.5

Between ≥30,000 Ω

Terminals and

Ground

VR- 63 100 250 400

(dv/dt)Rmax 38 40 110 270

• Insulation Resistance: IR

• Max voltage gradient

• Tangent of Loss Angle: D.F.

PACKAGING millimeters (inches)

Climatic Category 55/100/56 Performance Class 2

Capacitance Range CR1nF to 2.2µF (E12)

Tolerance on CR±5%; ±10%

(other values on request)

Nominal Voltages VR_ 63/100/250/400V

VR~ 40/ 63/160/200V

Category Voltage Vc = 0.8VR- at 100°C

Test Voltage Ve = 1.6VR-/2s at 25°C

PERFORMANCE CHARACTERISTICS

BF 01/02/07/06/05/04: Radial Leads

BQ 01/02/07/06/05/04 (Lead Free product available upon request)

CPM-83----- pitch = 5.08mm (0.200")

Capacitance Reference

Range BF or BQ

(CR)V

R- / VR~

63/40 (voltage code: D) 100/63 (voltage code: E) 250/160 (voltage code: G) 400/200 (voltage code: I)

1,000 pF BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

1,200 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

1,500 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

1,800 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

2,200 pF BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

2,700 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

3,300 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

3,900 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

4,700 pF BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

5,600 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

6,800 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

8,200 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

10,000 pF BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01

12,000 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF02 or BQ02

15,000 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF02 or BQ02

18,000 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF02 or BQ02

22,000 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF02 or BQ02

27,000 BF01 or BQ01 BF01 or BQ01 BF01 or BQ01 BF07 or BQ07

33,000 BF01 or BQ01 BF01 or BQ01 BF02 or BQ02 BF07 or BQ07

39,000 BF01 or BQ01 BF01 or BQ01 BF02 or BQ02 BF06 or BQ06

47,000 pF BF01 or BQ01 BF01 or BQ01 BF02 or BQ02 BF06 or BQ06

56,000 BF01 or BQ01 BF01 or BQ01 BF07 or BQ07 BF04 or BQ04

68,000 BF01 or BQ01 BF01 or BQ01 BF07 or BQ07 BF04 or BQ04

82,000 BF01 or BQ01 BF01 or BQ01 BF07 or BQ07 BF04 or BQ04

100 nF BF01 or BQ01 BF01 or BQ01 BF07 or BQ07 BF04 or BQ04

120 BF01 or BQ01 BF01 or BQ01 BF06 or BQ06

150 BF01 or BQ01 BF01 or BQ01 BF06 or BQ06

180 BF01 or BQ01 BF02 or BQ02 BF04 or BQ04

220 nF BF01 or BQ01 BF02 or BQ02 BF04 or BQ04

270 BF02 or BQ02 BF07 or BQ07

330 BF02 or BQ02 BF07 or BQ07

390 BF02 or BQ02 BF07 or BQ07

470 nF BF02 or BQ02 BF07 or BQ07

560 BF07 or BQ07 BF05* or BQ05

680 BF07 or BQ07 BF05* or BQ05

820 BF07 or BQ07 BF05* or BQ05

1µF BF07 or BQ07 BF05 or BQ05

1.5 µF BF05* or BQ05

2.2 µF BF05** or BQ05

*Upon request - no change

**Upon request & only available 50 V (VR) - no change

BF04/BF06: New

BQ range: New

CAPACITANCE VALUES (CR) and NOMINAL VOLTAGES (VR)

HOW TO ORDER

BJ01

Type

Class

Voltage

0104

Capacitance Value

Tolerance

– –

Suffix

Schoop

Metallized film

0.4 (0.016) min.

5.08 (0.200) +0.6 (0.024)

-0.1 (0.004)

4.1 (0.161)

± 0.5 (0.020)

APPLICATIONS

Non-inductive, self-healing, metallized polyester film

capacitor, insulated* thermoplastic casing, epoxy resin

sealed with stand-offs*. Radial connections with a lead

spacing of 5.08 mm.

* Flame retardant case according to UL 94 VO.

Some examples of use:

Supply decoupling, filter, integrators, treatment of analog

signals, rejection of line perturbations, pulse logic and timing

circuit, lamp capacitor for electronic compact lamps, inverter

for LCD monitors, automotive DC motor suppression.

STANDARDIZATION

Generic specifications:

CEI 384-1/CECC 30000/UTE 83100

Sectional specifications:

CEI 384-2/CECC 30400/UTE 83151

On the LNZ list:

Complies with type CPM-N

RAQ2 production, equivalent AQAP-4 of NATO

Case L max. H max. e max. ø ± 0.02 Observations

01 7.5 (0.295) 6.5 (0.256) 2.5 (0.098) 0.5 (0.020) 1nF < Cr< 150nF

02 7.5 (0.295) 8.0 (0.315) 3.2 (0.126) 0.5 (0.020) 6.8nF < Cr< 220nF

05 7.5 (0.295) 12.0 (0.472) 6.0 (0.236) 0.5 (0.020) 47nF < Cr< 1500nF

06 7.5 (0.295) 9.6 (0.378) 6.0 (0.236) 0.5 (0.020) 33nF < Cr< 1000nF

07 7.5 (0.295) 8.0 (0.315) 5.0 (0.197) 0.5 (0.020) 22nF < Cr< 680nF

DIMENSIONS: millimeters (inches)

METALLIZED POLYESTER FILM CAPACITOR

HIGH PERFORMANCES – HIGH TEMPERATURE

PULSE APPLICATIONS

Schematic Cross Section

BJ 01/02/05/06/07: Lead Free product

5.08 Radial Leads 63/100/250/400 V-

MARKING

T 100 nJ D

Marking

Nominal capacitance (EIA code)

Tolerance (EIA code)

DC nominal voltage

Example above: D = 63 Vdc, 100nF, ±5%

BJ 01/02/05/06/07: Lead Free product

5.08 Radial Leads 63/100/250/400 V-

PERFORMANCE CHARACTERISTICS

Climatic category: 55/125/56 - Performance Class 1

Capacitance range: Cr1nF to 1500nF (E12)

Tolerances on Cr:±5%, ±10% (other values on request)

Nominal voltages: Vr/63/100/250/400 V

Vr/40/63/160/200 V

Rated temperature: 85°C

Category voltages: Vc= 0.8 Vrat 100°C; 0.5Vr at 125°C

Test voltage: Ve= 1.6 Vr /2s at 25°C

Life test: dC/C ≤5% after 125°C/2000h/0.625 Vr

Thermal shock: –55/+125°C/time cycle 1 hr/5 cycles dC/C ≤8%; D.F. 1kHz ≤1%

Humidity test: +40°C/93% RH/56 days dC/C ≤5%

12.7 (0.500)

±0.2 (0.008)

12.7 (0.500)

±1.0 (0.039)

12.0 (0.472)

±1.0 (0.039)

18.0 (0.709)

±0.5 (0.020)

4.0 (0.157)

±0.3 (0.012)

5.08 (0.200)

Thermoadhesive tape

(Other sizes according to standard CEI : 286-2)

Dimensions: millimeters (inches)

Case Quantity

Reel Ammopack Bulk

Suffix DB DD DA DC - -

xpanasert avisert panasert avisert USA Std. Europe /

Asia

Std.

01 2500 2500 1000 5000

02 1800 2000 1000 3800

07 1200 1250 1000 2500

06 900 1100 1000 1500

05 900 1100 1000 1500

04 750 750 1000 1000

Panasert Avisert

H16.5 ± 0.30 19.5 ± 0.50

(0.65 ± 0.012) (0.768 ± 0.020)

Measurement Capacitance DF:

Frequency Performance

Category 2

1kHz CR≤1µF ≤1.0%

100 Hz CR> 1µF ≤1.0%

Measuring CR<= 0.33µF CR> 0.33µF

Points

IR min (GΩ)IR * CRmin

(MΩ* µF)

Performance Class Performance Class

Between VR-VR-VR-VR-

Terminals ≤100V > 100V ≤100V > 100V

3.75 7.5 1.25 2.5

Between ≥30,000 Ω

Terminals and

Ground

VR- 63 100 250 400

(dv/dt)Rmax 250 300 400 600

• Insulation Resistance: IR

• Max voltage gradient

• Tangent of Loss Angle: D.F.

PACKAGING millimeters (inches)

BJ 01/02/05/06/07: Lead Free product

5.08 Radial Leads 63/100/250/400 V-

CHARACTERISTICS CURVES

Nominal RMS Voltage vs. Frequency

Influence of the frequency on the impedance (room Temperature)

63Vdc/40Vrms

100

0.1 1 10 100

Vrms (V)

f (KHz)

0.01µF

0.047µF

1µF

100Vdc/63Vrms

100

0.1 1 10 100

Vrms (V)

0.01µF

0.047µF

0.47µF

250Vdc/160Vrms

100

1000

0.1 1 10 100

f (KHz )

Vrms(V)

0.01µF

0.033µF

0.15µF

0.01

0.1

100

0.1 1 10 100

400Vdc/200Vrms

100

1000

0.1 1 10 100

f (KHz)

Vrms (V)

0.0047µF

0.0022µF

0.047µF

BJ 01/02/05/06/07: Lead Free product

5.08 Radial Leads 63/100/250/400 V-

CAPACITANCE VALUES (CR) AND

NOMINAL VOLTAGES (VR) VS CASE SIZE

Capacitance Reference

Range BJ

(CR)V

R-/VR~

63/40 100/63 250/160 400/200

1BJ01 BJ01 BJ01 BJ01

1.5 BJ01 BJ01 BJ01 BJ01

2.2 BJ01 BJ01 BJ01 BJ01

3.3 BJ01 BJ01 BJ01 BJ01

4.7 BJ01 BJ01 BJ01 BJ01

6.8 BJ01 BJ01 BJ01 BJ02

10 BJ01 BJ01 BJ01 BJ02

15 BJ01 BJ01 BJ01 BJ02

22 BJ01 BJ01 BJ02 BJ07

33 BJ01 BJ01 BJ02 BJ06

47 BJ01 BJ01 BJ07 BJ05

68 BJ01 BJ01 BJ07

100 BJ01 BJ02 BJ06

150 BJ01 BJ07 BJ05

220 BJ01 BJ06

330 BJ02 BJ05

470 BJ02 BJ05

680 BJ07

1000 BJ06

1500 BJ05

HOW TO ORDER

BH01 4 D 0104 K - -

Type Class Voltage Capacitance Tolerance Suffix

BH 01/02/07/06/05:

Radial Leads (Lead Free Product)

CPM-N----- pitch = 5.08mm (0.200")

GENERAL DESCRIPTION

Dielectric: Metallized polyester film (Polyethylene teraphtalate)

Stacked-film

Leads: Radial tin - plated wire

Protection: Plastic case (UL 94: V-O) / Epoxy Resin

Marking: Logo

DC Normal Voltage

Nominial Capacitance

Tolerance (EIA)

Batch Code Number

Example: T D474KC8L

Delivery Mode: Bulk

Taped (reel or ammopack)

STANDARDIZATION

Generic specifications:

CEI 384-1/CECC 30000/UTE 83100

Sectional specifications:

CEI 384-2/CECC 30400/UTE 83151

On the LNZ List:

Complies with type CPM-N

RAQ2 production, equivalent AQAP-4 of NATO

APPLICATIONS

• Supply decoupling

• Filter

• Integrators

• Treatment of analog signals

• Rejection of line perturbations, etc.

Specifically designed of working in

severe environmental conditions such

as automotive applications: engine

control, multiplexing, system, etc.

0.4 (0.016) min

5.08 (0.200) -0.6 (0.024)

-0.1 (0.004)

4.10 (0.161)

±0.5 (0.020)



*L dimension measured 3mm above base of case

Case L max H max e max ø ± 0.02

01 7.5 (0.295) 6.5 (0.256) 2.5 (0.098) 0.5 (0.020)

02 7.5 (0.295) 8.0 (0.315) 3.2 (0.126) 0.5 (0.020)

05 7.5 (0.295) 12.0 (0.472) 6.0 (0.236) 0.5 (0.020)

06 7.5 (0.295) 9.6 (0.378) 6.0 (0.236) 0.5 (0.020)

07 7.5 (0.295) 8.0 (0.315) 5.0 (0.197) 0.5 (0.020)

DIMENSIONS millimeters (inches)

12.7 (0.500)

±0.2 (0.008)

12.7 (0.500)

±1.0 (0.039)

12.0 (0.472)

±1.0 (0.039)

18.0 (0.709)

±0.5 (0.020)

4.0 (0.157)

±0.3 (0.012)

5.08 (0.200)

Thermoadhesive tape

(Other sizes according to standard CEI : 286-2)

Dimensions: millimeters (inches)



BH 01/02/07/06/05:

Radial Leads (Lead Free Product)

CPM-N----- pitch = 5.08mm (0.200")

Case Quantity

Reel Ammopack Bulk

Suffix DB DD DA DC - -

xpanasert avisert panasert avisert USA Std. Europe /

Asia

Std.

01 2500 2500 1000 5000

02 1800 2000 1000 3800

07 1200 1250 1000 2500

06 900 1100 1000 1500

05 900 1100 1000 1500

Panasert Avisert

H16.5 ± 0.30 19.5 ± 0.50

(0.65 ± 0.012) (0.768 ± 0.020)

Measurement Capacitance DF:

Frequency Performance

Category 2

1kHz CR≤1µF ≤1.0%

100 Hz CR> 1µF ≤1.0%

Measuring CR<= 0.33µF CR> 0.33µF

Points

IR min (GΩ)IR * CRmin

(MΩ* µF)

Performance Class Performance Class

Between VR-VR-VR-VR-

Terminals ≤100V > 100V ≤100V > 100V

3.75 7.5 1.25 2.5

Between - 30,000 Ω

Terminals and

Ground

VR- 63 100 250 400

(dv/dt)Rmax 38 40 110 270

• Insulation Resistance: IR

• Max voltage gradient

• Tangent of Loss Angle: D.F.

PACKAGING millimeters (inches)

Climatic Category 55/125/56 Performance Class 2

Capacitance Range CR1nF to 2.2mF (E12)

Tolerance on CR±5%; ±10%

(other values on request)

Nominal Voltages VR_ 63/100/250/400V

VR~ 40/63/160/200V

Category Voltage Vc = 0.8VR- at 100°C & 0.5VR- at 125°C

Test Voltage Ve = 1.6VR-/2s at 25°C

Life Test Delta C/C<= 5% after 125ºC/1000h/0.5VR-

Thermal Shock -55/+125ºC/time cycle 1hr/500 cycles delta C/C <=10% D.F. 1kHz<=1%

Humidity Test 85ºC/85% HR/1000 h delta C/C <=10%

PERFORMANCE CHARACTERISTICS

BH 01/02/07/06/05:

Radial Leads (Lead Free Product)

CPM-N----- pitch = 5.08mm (0.200")

Capacitance Reference

Range BH

(CR)V

R- / VR~

63/40 (voltage code: D) 100/63 (voltage code: E) 250/160 (voltage code: G) 400/200 (voltage code: I)

1,000 pF BH01 BH01 BH01 BH01

1,200 BH01 BH01 BH01 BH01

1,500 BH01 BH01 BH01 BH01

1,800 BH01 BH01 BH01 BH01

2,200 pF BH01 BH01 BH01 BH01

2,700 BH01 BH01 BH01 BH01

3,300 BH01 BH01 BH01 BH01

3,900 BH01 BH01 BH01 BH01

4,700 pF BH01 BH01 BH01 BH01

5,600 BH01 BH01 BH01 BH02

6,800 BH01 BH01 BH01 BH02

8,200 BH01 BH01 BH01 BH07

10,000 pF BH01 BH01 BH01 BH07

12,000 BH01 BH01 BH01 BH07

15,000 BH01 BH01 BH01 BH07

18,000 BH01 BH01 BH01 BH06

22,000 BH01 BH01 BH02 BH06

27,000 BH01 BH01 BH02 BH06

33,000 BH01 BH01 BH02 BH06

39,000 BH01 BH01 BH07 BH05

47,000 pF BH01 BH01 BH07 BH05

56,000 BH01 BH01 BH07

68,000 BH01 BH01 BH07

82,000 BH01 BH01 BH06

100 nF BH01 BH01 BH06

120 BH01 BH01 BH05

150 BH01 BH01 BH05

180 BH01 BH02

220 nF BH01 BH02

270 BH02 BH07

330 BH02 BH07

390 BH07 BH07

470 nF BH07 BH05

560 BH07 BH05

680 BH07 BH05

820 BH07 BH05

1µF BH07 BH05

1.5 µF BH05

2.2 µF BH05**

**Upon request & only available 50 V (VR)

CAPACITANCE VALUES (CR) and NOMINAL VOLTAGES (VR)

APPLICATIONS

• Commodity Product:

• Decoupling with AC or pulse components

• High current uses (TV deflection coils)

• Capacitive dividers

• Energy saving lamps, etc.

TECHNOLOGY

• Dielectric: Polyester film

• Stacked-film for pitch 7.5, 10 & 15mm (63Vdc...400Vdc)

Wound capacitor for pitch 7.5 & 10 & 15mm (630Vdc/1000Vdc)

for pitch 22.5 & 27.5mm (63Vdc/1000Vdc)

• Leads: Radial tinned copper wire

• Protection: Plastic case (UL94: V-O) / Polyurethane resin

• Marking: Logo

Type

Nominal Capacitance

Tolerance (EIA)

DC Nominal Voltage

Example: T BN 47n J 400

• Delivery Mode: Bulk

Taped (reel)

BN 07/10/15/22/27

CPM-85 – 7.5/10/15/22.5/27.5 (BT/BG/BO)

Schoop

Metallized Film

Schematic Cross Section

PERFORMANCE CHARACTERISTICS

Climatic Category: 55/125/56 Performance Class 2

Capacitance Range: CR1 nF to 22 µF (E6)

Tolerances on CR:±5%, ±10%, ±20% (other values on request)

Nominal Voltages: VR–63/100/250/400/630/1000 V

VR~40/63/115/200/220/450 V

Category Voltage: Vc= Un at 100°C & 0.5 Un at 125°C

Test Voltage: Ve= 1.6 Undc/2 s at 20°C

Total Self Inductance (L): For lead length = 2mm

Tangent of Loss Angle at 1 kHz: D.F. ≤100.10-4 for C >0.1µF

≤80.10-4 for C ≤0.1µF

Insulation Resistance: IR ≥3.75 Gfor C ≤0.33µF

IR (M) * C(µF) ≥1250 s for C >0.33µF

measures at 10V for Un=63Vdc and 100V for others

dv/dt: (V/µsec)

Thermal Resistance: Rth hot spot/ambient (°C/W)

VR-63 100 250 400 630 1000

(dv/dt)Rmax pitch: 7.5mm 60 75 120 300 440

(dv/dt)Rmax pitch: 10mm 30 40 50 110 112 800

(dv/dt)Rmax pitch: 15mm 23 27 34 79 102 400

(dv/dt)Rmax pitch: 22.5mm 8 9 14 25 25 380

(dv/dt)Rmax pitch: 27.5mm 5 5 6 8 15 340

Pitch (mm) 7.5 10 15 22.5 27.5

L (nH) 8 9 10 18 18

Pitch (mm) 7.5mm 10mm 15mm 22.5mm 27.5mm

Case 1 2 C D E0 4 5 6 9 10 11 12 13 16 P0 18 19 26 R68

Rth (stacked) 201 147 117 140 124 90 88 61 82

Rth (wound) 201 147 117 140 124 90 123 86 75 64 53 48 42 40 33 30 27 23

STANDARDIZATION

Generic specifications:

CEI 384-1/CECC 30000/UTE 83100

Sectional specifications:

CEI 384-2/CECC 30400/UTE 83151

12.7 (0.500)

±0.2 (0.008)

6.0 (0.236)

±0.2 (0.008)

18.0 (0.709)

±0.5 (0.020)

4.0 (0.157)

±0.3 (0.012)

L.S.



Lead Spacing: 7.5 (0.295)

BN 07/10/15/22/27

Pitch = 7.5mm / 10mm /15mm / 22.5mm / 27.5mm

PACKAGING

• Reel

• Bulk

12.7 (0.500)

±0.2 (0.008)

6.0 (0.236)

±0.2 (0.008)

18.0 (0.709)

±0.5 (0.020)

4.0 (0.157)

±0.3 (0.012) L.S.



Lead Spacing: 10/15 (0.394/0.590)

Adhesive tape

(Other sizes according to standard CEI : 286-2)

Dimensions: millimeters (inches)

Suffix - - LG KB KC KE KH KK K3 K7

Leads 6mm 3.2mm 3.5mm 4mm 5mm 9mm 15mm 20mm 25mm

Length +0/–1 ±0.4 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±1 ±1

Taping Suffix EN

Lead Spacing

Tol ±0.4 (0.016)

7.5 (0.295) 10 (0.394) 15 (0.590)

12.7 ±1 25.4 ±1

(0.5 ±0.039) (1.0 .±0.039)

16.5 ±0.3 16 +1.5/–0.5

(0.650 ±0.012) (0.600 +0.059/–0.020)

Standard Suffix: - -

Special MOQ for these special suffix

BN 07/10/15/22/27

Pitch = 7.5mm

0.4 (0.016) min

6 (0.236)

+ 0 (0.000)

– 1 (0.039)

Pitch Ordering Code Vr-/Vr~ Cr Case Dimensions (mm) MOQ +10% I2tIrms

mm L max H max e max Reel Bulk(1) -0.5 mm (A2 .sec) (A)

7.5 BN074D0683+- - 63/40 68nF 1 9.3 8.2 3.3 8000 12,000 0.6 8.33 x 10-4 0.357

7.5 BN074D0104+- - 100nF 1 9.3 8.2 3.3 8000 12,000 0.6 1.41 x 10-3 0.48

7.5 BN074D0224+- - 220nF 1 9.3 8.2 3.3 8000 12,000 0.6 2.79 x 10-3 0.53

7.5 BN074D0334+- - 330nF 1 9.3 8.2 3.3 8000 12,000 0.6 3.63 x 10-3 0.64

7.5 BN074D0474+- - 470nF 1 9.3 8.2 3.3 8000 12,000 0.6 5.11 x 10-3 0.84

7.5 BN074D0684+- - 680nF 2 10.1 10.2 5.2 10,000 14,000 0.6 1.54 x 10-2 1.33

7.5 BN074D0105+- - 1µF 2 10.1 10.2 5.2 10,000 14,000 0.6 2.78 x 10-2 1.77

7.5 BN074D0225+- - 2.2µF D 10.1 12.2 6.2 8000 8000 0.6 1.12 x 10-1 4

7.5 BN074E0333+- - 100/63 33nF 1 9.3 8.2 3.3 8000 12,000 0.6 4.52 x 10-4 0.21

7.5 BN074E0473+- - 47nF 1 9.3 8.2 3.3 8000 12,000 0.6 6.12 x 10-4 0.29

7.5 BN074E0104+- - 100nF 1 9.3 8.2 3.3 8000 12,000 0.6 1.41 x 10-3 0.48

7.5 BN074E0224+- - 220nF 1 9.3 8.2 3.3 8000 12,000 0.6 2.79 x 10-3 0.53

7.5 BN074E0334+- - 330nF 2 10.1 10.2 5.2 10,000 14,000 0.6 7.85 x 10-3 1.00

7.5 BN074E0474+- - 470nF 2 10.1 10.2 5.2 10,000 14,000 0.6 1.27 x 10-2 1.16

7.5 BN074E0684+- - 680nF C 10.1 11.2 5.2 10,000 12,000 0.6 2.23 x 10-2 1.48

7.5 BN074E0105+- - 1µF D 10.1 12.2 6.2 8000 8000 0.6 4.61 x 10-2 2.18

7.5 BN074G0472+- - 250/115 4.7nF 1 9.3 8.2 3.3 8000 12,000 0.6 6.88 x 10-5 0.05

7.5 BN074G0682+- - 6.8nF 1 9.3 8.2 3.3 8000 12,000 0.6 9.61 x 10-4 0.08

7.5 BN074G0103+- - 10nF 1 9.3 8.2 3.3 8000 12,000 0.6 2.45 x 10-4 0.14

7.5 BN074G0223+- - 22nF 1 9.3 8.2 3.3 8000 12,000 0.6 3.62 x 10-4 0.19

7.5 BN074G0333+- - 33nF 1 9.3 8.2 3.3 8000 12,000 0.6 4.52 x 10-4 0.21

7.5 BN074G0473+- - 47nF 1 9.3 8.2 3.3 8000 12,000 0.6 6.11 x 10-4 0.29

7.5 BN074G0104+- - 100nF 2 10.1 10.2 5.2 10,000 14,000 0.6 1.85 x 10-3 0.53

7.5 BN074G0224+- - 220nF D 10.1 12.2 6.2 8000 8000 0.6 8.93 x 10-3 1.53

7.5 BN074I0102+- - 400/200 1nF 1 9.3 8.2 3.3 8000 12,000 0.6 1.10 x 10-5 0.02

7.5 BN074I0222+- - 2.2nF 1 9.3 8.2 3.3 8000 12,000 0.6 3.63 x 10-5 0.03

7.5 BN074I0332+- - 3.3nF 1 9.3 8.2 3.3 8000 12,000 0.6 5.09 x 10-5 0.04

7.5 BN074I0472+- - 4.7nF 1 9.3 8.2 3.3 8000 12,000 0.6 6.88 x 10-5 0.05

7.5 BN074I0103+- - 10nF 1 9.3 8.2 3.3 8000 12,000 0.6 2.45 x 10-4 0.14

7.5 BN074I0223+- - 22nF 1 9.3 8.2 3.3 8000 12,000 0.6 3.62 x 10-4 0.19

7.5 BN074I0333+- - 33nF 2 10.1 10.2 5.2 10,000 14,000 0.6 1.44 x 10-3 0.38

7.5 BN074I0473+- - 47nF 2 10.1 10.2 5.2 10,000 14,000 0.6 1.65 x 10-3 0.40

7.5 BN074I0683+- - 68nF C 10.1 11.2 5.2 10,000 12,000 0.6 3.46 x 10-3 0.59

7.5 BN074I0823+- - 82nF D 10.1 12.2 6.2 8000 8000 0.6 5.03 x 10-3 0.71

7.5 BN074K0102+- - 630/220 1nF 1 9.3 8.2 3.3 8000 12,000 0.6 9.0 x 10-7 0.027

7.5 BN074K0152+- - 1.5nF 1 9.3 8.2 3.3 8000 12,000 0.6 2.0 x 10-6 0.027

7.5 BN074K0222+- - 2.2nF 1 9.3 8.2 3.3 8000 12,000 0.6 2.3 x 10-6 0.027

7.5 BN074K0332+- - 3.3nF 1 9.3 8.2 3.3 8000 12,000 0.6 2.5 x 10-6 0.027

7.5 BN074K0472+- - 4.7nF 1 9.3 8.2 3.3 8000 12,000 0.6 5.7 x 10-6 0.027

7.5 BN074K0682+- - 6.8nF 2 10.1 10.2 5.2 10,000 14,000 0.6 1.2 x 10-5 0.14

7.5 BN074K0103+- - 10nF 2 10.1 10.2 5.2 10,000 14,000 0.6 2.6 x 10-5 0.14

7.5 BN074K0153+- - 15nF C 10.1 11.2 5.2 10,000 12,000 0.6 5.8 x 10-5 0.22

7.5 BN074K0223+- - 22nF D 10.1 12.2 6.2 8000 8000 0.6 1.2 x 10-4 0.34

7.5 BN074K0273+- - 27nF D 10.1 12.2 6.2 8000 8000 0.6 1.8 x 10-4 0.34

Replace the + by the tolerance code: J=5% - K=10% - M=20%

Replace the - - by the packaging suffix: - - = standard bulk - EN = taping on reel etc

(1): MOQ for standard bulk suffix - -

BN07

BN 07/10/15/22/27

Pitch = 10mm

Pitch Ordering Code Vr-/Vr~ Cr Case Dimensions (mm) MOQ +10% I2tIrms

mm L max H max e max Reel Bulk(1) -0.5 mm (A2 .sec) (A)

10 BN104D0224+- - 63/40 220nF E0 12.7 9.2 4.2 6800 14,000 0.6 2.20 x 10-3 0.71

10 BN104D0334+- - 330nF E0 12.7 9.2 4.2 6800 14,000 0.6 3.54 x 10-3 0.73

10 BN104D0474+- - 470nF E0 12.7 9.2 4.2 6800 14,000 0.6 5.74 x 10-3 0.765

10 BN104D0684+- - 680nF E0 12.7 9.2 4.2 6800 14,000 0.6 6.84 x 10-3 0.837

10 BN104D0105+- - 1µF E0 12.7 9.2 4.2 6800 14,000 0.6 1.11 x 10-2 1.23

10 BN104D0155+- - 1.5µF 4 12.7 10.2 5.2 5600 10,000 0.6 2.50 x 10-2 1.83

10 BN104D0225+- - 2.2µF 5 12.7 13.6 5.2 5600 8000 0.6 5.37 x 10-2 2.685

10 BN104E0683+- - 100/63 68nF E0 12.7 9.2 4.2 6800 14,000 0.6 8.74 x 10-4 0.32

10 BN104E0104+- - 100nF E0 12.7 9.2 4.2 6800 14,000 0.6 1.33 x 10-3 0.40

10 BN104E0154+- - 150nF E0 12.7 9.2 4.2 6800 14,000 0.6 1.47 x 10-3 0.667

10 BN104E0224+- - 220nF E0 12.7 9.2 4.2 6800 14,000 0.6 2.20 x 10-3 0.71

10 BN104E0334+- - 330nF E0 12.7 9.2 4.2 6800 14,000 0.6 3.54 x 10-3 0.73

10 BN104E0474+- - 470nF E0 12.7 9.2 4.2 6800 14,000 0.6 5.74 x 10-3 0.765

10 BN104E0684+- - 680nF 4 12.7 10.2 5.2 5600 10,000 0.6 1.20 x 10-2 1.107

10 BN104E0105+- - 1000nF 5 12.7 13.6 5.2 5600 8000 0.6 2.60 x 10-2 1.629

10 BN104G0333+- - 250/115 33nF E0 12.7 9.2 4.2 6800 14,000 0.6 4.86 x 10-4 0.21

10 BN104G0473+- - 47nF E0 12.7 9.2 4.2 6800 14,000 0.6 6.01 x 10-4 0.26

10 BN104G0683+- - 68nF E0 12.7 9.2 4.2 6800 14,000 0.6 8.74 x 10-4 0.32

10 BN104G0104+- - 100nF E0 12.7 9.2 4.2 6800 14,000 0.6 1.33 x 10-3 0.4

10 BN104G0154+- - 150nF E0 12.7 9.2 4.2 6800 14,000 0.6 1.47 x 10-3 0.5

10 BN104G0224+- - 220nF 4 12.7 10.2 5.2 5600 10,000 0.6 3.16 x 10-3 0.73

10 BN104G0334+- - 330nF 4 12.7 10.2 5.2 5600 10,000 0.6 7.11 x 10-3 1.1

10 BN104G0474+- - 470nF 5 12.7 13.6 5.2 5600 8000 0.6 1.44 x 10-2 1.57

10 BN104I0472+- - 400/200 4.7nF E0 12.7 9.2 4.2 6800 14,000 0.6 6.03 x 10-5 0.043

10 BN104I0682+- - 6.8nF E0 12.7 9.2 4.2 6800 14,000 0.6 9.96 x 10-5 0.07

10 BN104I0103+- - 10nF E0 12.7 9.2 4.2 6800 14,000 0.6 1.13 x 10-4 0.088

10 BN104I0153+- - 15nF E0 12.7 9.2 4.2 6800 14,000 0.6 1.70 x 10-4 0.129

10 BN104I0223+- - 22nF E0 12.7 9.2 4.2 6800 14,000 0.6 3.31 x 10-4 0.157

10 BN104I0333+- - 33nF E0 12.7 9.2 4.2 6800 14,000 0.6 4.66 x 10-4 0.213

10 BN104I0473+- - 47nF E0 12.7 9.2 4.2 6800 14,000 0.6 6.01 x 10-4 0.26

10 BN104I0683+- - 68nF 4 12.7 10.2 5.2 5600 10,000 0.6 1.26 x 10-3 0.35

10 BN104I0104+- - 100nF 5 12.7 13.6 5.2 5600 8000 0.6 2.72 x 10-3 0.52

10 BN104K0472+- - 630/220 4.7nF E0 12.7 9.2 4.2 6800 14,000 0.6 2.16 x 10-5 0.05

10 BN104K0682+- - 6.8nF E0 12.7 9.2 4.2 6800 14,000 0.6 4.53 x 10-5 0.07

10 BN104K0103+- - 10nF E0 12.7 9.2 4.2 6800 14,000 0.6 9.74 x 10-5 0.08

10 BN104K0153+- - 15nF E0 12.7 9.2 4.2 6800 14,000 0.6 2.20 x 10-4 0.10

10 BN104K0223+- - 22nF 4 12.7 10.2 5.2 5600 10,000 0.6 4.74 x 10-4 0.14

10 BN104K0333+- - 33nF 4 12.7 10.2 5.2 5600 10,000 0.6 7.41 x 10-4 0.18

10 BN104K0473+- - 47nF 5 12.7 13.6 5.2 5600 8000 0.6 9.16 x 10-4 0.24

10 BN104L0102+- - 1000/450 1nF E0 12.7 9.2 4.2 6800 14,000 0.6 1.8 x 10-5 0.05

10 BN104L0152+- - 1.5nF E0 12.7 9.2 4.2 6800 14,000 0.6 4.00 x 10-5 0.05

10 BN104L0222+- - 2.2nF E0 12.7 9.2 4.2 6800 14,000 0.6 7.00 x 10-5 0.08

10 BN104L0332+- - 3.3nF 4 12.7 10.2 5.2 5600 10,000 0.6 1.24 x 10-4 0.14

10 BN104L0472+- - 4.7nF 5 12.7 13.6 5.2 5600 8000 0.6 2.51 x 10-4 0.22

10 BN104L0682+- - 6.8nF 5 12.7 13.6 5.2 5600 8000 0.6 5.26 x 10-4 0.26

Replace the + by the tolerance code: J=5% - K=10% - M=20%

Replace the - - by the packaging suffix: - - = standard bulk - EN = taping on reel etc

(1): MOQ for standard bulk suffix - -

BN10

BN 07/10/15/22/27

Pitch = 15mm

Pitch Ordering Code Vr-/Vr~ Cr Case Dimensions (mm) MOQ +10% I2tIrms

mm L max H max e max Reel Bulk(1) -0.5 mm (A2 .sec) (A)

15 BN154D0684+- - 63/40 680nF 6 17.7 10.6 5.2 4000 6000 0.8 1.22 x 10-2 0.83

15 BN154D0105+- - 1µF 6 17.7 10.6 5.2 4000 6000 0.8 2.12 x 10-2 0.96

15 BN154D0155+- - 1.5µF 6 17.7 10.6 5.2 4000 6000 0.8 3.60 x 10-2 1.43

15 BN154D0225+- - 2.2µF 6 17.7 10.6 5.2 4000 6000 0.8 4.38 x 10-2 1.783

15 BN154D0335+- - 3.3µF I0 17.7 12.2 6.2 4000 6000 0.8 9.86 x 10-2 2.674

15 BN154D0475+- - 4.7µF 9 17.7 14.6 8.7 2500 8000 0.8 4.19 x 10-1 3.808

15 BN154D0685+- - 6.8µF 9 17.7 14.6 8.7 2500 8000 0.8 2.00 x 10-1 5.50

15 BN154D0825+- - 8.2µF 9 17.7 14.6 8.7 2500 8000 0.8 6.09 x 10-1 6.200

15 BN154E0154+- - 100/63 150nF 6 17.7 10.6 5.2 4000 6000 0.8 4.35 x 10-3 0.43

15 BN154E0224+- - 220nF 6 17.7 10.6 5.2 4000 6000 0.8 5.53 x 10-3 0.64

15 BN154E0334+- - 330nF 6 17.7 10.6 5.2 4000 6000 0.8 1.13 x 10-2 0.72

15 BN154E0474+- - 470nF 6 17.7 10.6 5.2 4000 6000 0.8 1.33 x 10-2 0.96

15 BN154E0105+- - 1µF 6 17.7 10.6 5.2 4000 6000 0.8 1.71 x 10-2 0.96

15 BN154E0155+- - 1.5µF 6 17.7 10.6 5.2 4000 6000 0.8 3.60 x 10-2 1.43

15 BN154E0225+- - 2.2µF I0 17.7 12.2 6.2 4000 6000 0.8 8.20 x 10-2 2.111

15 BN154E0335+- - 3.3µF 9 17.7 14.6 8.7 2500 8000 0.8 1.85 x 10-1 3.168

15 BN154E0475+- - 4.7µF 9 17.7 14.6 8.7 2500 8000 0.8 3.74 x 10-1 4.51

15 BN154G0104+- - 250/115 100nF 6 17.7 10.6 5.2 4000 6000 0.8 2.58 x 10-3 0.38

15 BN154G0154+- - 150nF 6 17.7 10.6 5.2 4000 6000 0.8 4.35 x 10-3 0.43

15 BN154G0224+- - 220nF 6 17.7 10.6 5.2 4000 6000 0.8 5.57 x 10-3 0.64

15 BN154G0334+- - 330nF 6 17.7 10.6 5.2 4000 6000 0.8 7.51 x 10-3 0.72

15 BN154G0474+- - 470nF 6 17.7 10.6 5.2 4000 6000 0.8 1.17 x 10-2 1.024

15 BN154G0684+- - 680nF I0 17.7 12.2 6.2 4000 6000 0.8 2.44 x 10-2 1.483

15 BN154G0105+- - 1µF 9 17.7 14.6 8.7 2500 8000 0.8 5.28 x 10-2 2.178

15 BN154G0155+- - 1.5µF 9 17.7 14.6 8.7 2500 8000 0.8 1.19 x 10-1 3.267

15 BN154I0473+- - 400/200 47nF 6 17.7 10.6 5.2 4000 6000 0.8 1.19 x 10-3 0.191

15 BN154I0683+- - 68nF 6 17.7 10.6 5.2 4000 6000 0.8 1.59 x 10-3 0.28

15 BN154I0104+- - 100nF 6 17.7 10.6 5.2 4000 6000 0.8 2.58 x 10-3 0.38

15 BN154I0154+- - 150nF 6 17.7 10.6 5.2 4000 6000 0.8 4.35 x 10-3 0.43

15 BN154I0224+- - 220nF I0 17.7 12.2 6.2 4000 6000 0.8 9.37 x 10-3 0.70

15 BN154I0334+- - 330nF 9 17.7 14.6 8.7 2500 8000 0.8 2.11 x 10-2 1.05

15 BN154I0474+- - 470nF 9 17.7 14.6 8.7 2500 8000 0.8 4.27 x 10-2 1.50

15 BN154K0333+- - 630/220 33nF 6 17.7 10.6 5.2 4000 6000 0.8 4.90 x 10-4 0.14

15 BN154K0473+- - 47nF 6 17.7 10.6 5.2 4000 6000 0.8 8.73 x 10-4 0.20

15 BN154K0683+- - 68nF I0 17.7 12.2 6.2 4000 6000 0.8 4.11 x 10-3 0.32

15 BN154K0104+- - 100nF I0 17.7 12.2 6.2 4000 6000 0.8 4.50 x 10-3 0.46

15 BN154K0154+- - 150nF 9 17.7 14.6 8.7 2500 8000 0.8 1.00 x 10-2 0.70

15 BN154L0682+- - 1000/450 6.8nF 6 17.7 10.6 5.2 4000 6000 0.8 1.11 x 10-4 0.14

15 BN154L0103+- - 10nF 6 17.7 10.6 5.2 4000 6000 0.8 2.41 x 10-4 0.22

15 BN154L0223+- - 22nF 9 17.7 14.6 8.7 2500 6000 0.8 1.17 x 10-3 0.60

15 BN154L0333+- - 33nF 9 17.7 14.6 8.7 2500 8000 0.8 2.62 x 10-3 0.76

Replace the + by the tolerance code: J=5% - K=10% - M=20%

Replace the - - by the packaging suffix: - - = standard bulk - EN = taping on reel etc

(1): MOQ for standard bulk suffix - -

BN15

BN 07/10/15/22/27

Pitch = 22.5mm/27.5mm

Pitch Ordering Code Vr-/Vr~ Cr Case Dimensions (mm) MOQ +10% I2tIrms

mm L max H max e max Reel Bulk(1) -0.5 mm (A2 .sec) (A)

22.5 BN224D0685+- - 63/40 6.8µF 11 26.7 15.2 7.7 1600 0.8 1.39 x 10-1 2.09

22.5 BN224D0106+- - 10µF 12 26.7 17.6 7.7 1600 0.8 3.01 x 10-1 3.07

22.5 BN224D0156+- - 15µF 13 26.7 19.6 10.2 1200 0.8 6.77 x 10-1 4.6

22.5 BN224E0225+- - 100/63 2.2µF 11 26.7 15.2 7.7 1600 0.8 2.59 x 10-2 1.08

22.5 BN224E0335+- - 3.3µF 11 26.7 15.2 7.7 1600 0.8 5.82 x 10-2 1.60

22.5 BN224E0475+- - 4.7µF 11 26.7 15.2 7.7 1600 0.8 1.18 x 10-1 2.30

22.5 BN224E0685+- - 6.8µF 13 26.7 19.6 10.2 1200 0.8 2.47 x 10-1 3.30

22.5 BN224E0825+- - 8.2µF 13 26.7 19.6 10.2 1200 0.8 3.59 x 10-1 4.00

22.5 BN224G0105+- - 250/115 1µF 11 26.7 15.2 7.7 1600 0.8 1.64 x 10-2 1.14

22.5 BN224G0155+- - 1.5µF 11 26.7 15.2 7.7 1600 0.8 3.68 x 10-2 1.71

22.5 BN224G0225+- - 2.2µF 12 26.7 17.6 7.7 1600 0.8 7.92 x 10-1 2.50

22.5 BN224G0335+- - 3.3µF 13 26.7 19.6 10.2 1200 0.8 1.78 x 10-1 3.74

22.5 BN224I0334+- - 400/200 330nF 11 26.7 15.2 7.7 1600 0.8 3.64 x 10-3 0.383

22.5 BN224I0474+- - 470nF 11 26.7 15.2 7.7 1600 0.8 7.38 x 10-3 0.54

22.5 BN224I0684+- - 680nF 11 26.7 15.2 7.7 1600 0.8 1.54 x 10-2 0.80

22.5 BN224I0105+- - 1µF 12 26.7 17.6 7.7 1600 0.8 3.34 x 10-2 1.16

22.5 BN224I0155+- - 1.5µF 13 26.7 19.6 10.2 1200 0.8 7.52 x 10-2 1.75

22.5 BN224K0154+- - 630/220 150nF 11 26.7 15.2 7.7 1600 0.8 2.17 x 10-3 0.38

22.5 BN224K0224+- - 220nF 11 26.7 15.2 7.7 1600 0.8 4.66 x 10-3 0.54

22.5 BN224K0334+- - 330nF 12 26.7 17.6 7.7 1600 0.8 1.05 x 10-2 0.74

22.5 BN224K0474+- - 470nF 13 26.7 19.6 10.2 1200 0.8 2.13 x 10-2 1.18

22.5 BN224K0564+- - 560nF 13 26.7 19.6 10.2 1200 0.8 3.02 x 10-2 1.40

22.5 BN224L0333+- - 1000/450 33nF 11 26.7 15.2 7.7 1600 0.8 2.64 x 10-3 0.28

22.5 BN224L0473+- - 47nF 11 26.7 15.2 7.7 1600 0.8 5.35 x 10-3 0.40

22.5 BN224L0683+- - 68nF 12 26.7 17.6 7.7 1600 0.8 1.12 x 10-2 0.60

22.5 BN224L0104+- - 100nF 13 26.7 19.6 10.2 1200 0.8 2.42 x 10-2 0.86

22.5 BN224L0124+- - 120nF 13 26.7 19.6 10.2 1200 0.8 3.49 x 10-2 1.00

Replace the + by the tolerance code : J=5% - K=10% - M=20%

Replace the - - by the packaging suffix : - - = standard bulk - EN = taping on reel etc

(1): MOQ for standard bulk suffix - -

Pitch Ordering Code Vr-/Vr~ Cr Case Dimensions (mm) MOQ +10% I2tIrms

mm L max H max e max Reel Bulk(1) -0.5 mm (A2 .sec) (A)

27.5 BN274D0156+- - 63/40 15µF 16 31.7 19.6 10.2 960 0.8 4.07 x 10-1 3.57

27.5 BN274D0206+- - 20µF 16 31.7 19.6 10.2 960 0.8 7.24 x 10-1 4.80

27.5 BN274E0825+- - 100/63 8.2µF 16 31.7 19.6 10.2 960 0.8 2.16 x 10-1 3.12

27.5 BN274E0106+- - 10µF 16 31.7 19.6 10.2 960 0.8 3.22 x 10-1 3.80

27.5 BN274E0126+- - 12µF 16 31.7 19.6 10.2 960 0.8 4.63 x 10-1 4.56

27.5 BN274G0335+- - 250/115 3.3µF 16 31.7 19.6 10.2 960 0.8 1.07 x 10-1 2.9

27.5 BN274G0395+- - 3.9µF 16 31.7 19.6 10.2 960 0.8 1.50 x 10-1 3.42

27.5 BN274G0475+- - 4.7µF P0 31.7 22.6 13.7 1600 0.8 2.18 x 10-1 4.17

27.5 BN274G0685+- - 6.8µF P0 31.7 22.6 13.7 1600 0.8 4.56 x 10-1 6.00

27.5 BN274G0106+- - 10µF 18 31.7 26.2 15.2 1280 0.8 9.85 x 10-1 6.20

27.5 BN274G0156+- - 15µF 26 31.7 31.6 21.2 448 0.8 2.77 6.20

27.5 BN274G0226+- - 22µF * R68 32 37 22 448 0.8 5.96 6.20

27.5 BN274I0155+- - 400/200 1.5µF 16 31.7 19.6 10.2 960 0.8 4.52 x 10-2 1.43

27.5 BN274I0225+- - 2.2µF P0 31.7 22.6 13.7 1600 0.8 9.73 x 10-2 1.98

27.5 BN274I0335+- - 3.3µF P0 31.7 22.6 13.7 1600 0.8 2.19 x 10-1 2.98

27.5 BN274I0475+- - 4.7µF 18 31.7 26.2 15.2 1280 0.8 4.44 x 10-1 4.23

27.5 BN274I0685+- - 6.8µF 19 31.7 30.2 17.7 1040 0.8 9.30 x 10-1 6.10

27.5 BN274I0106+- - 10µF * R68 32 37 22 448 0.8 2.01 6.20

27.5 BN274K0564+- - 630/220 560nF 16 31.7 19.6 10.2 960 0.8 1.77 x 10-2 1.61

27.5 BN274K0684+- - 680nF 16 31.7 19.6 10.2 960 0.8 2.61 x 10-2 1.70

27.5 BN274K0105+- - 1µF P0 31.7 22.6 13.7 1600 0.8 5.69 x 10-2 1.90

27.5 BN274K0225+- - 2.2µF 19 31.7 30.2 17.7 1040 0.8 2.73 x 10-1 4.20

27.5 BN274K0335+- - 3.3µF * R68 32 37 22 448 0.8 6.14 x 10-1 6.20

27.5 BN274K0435+- - 4.3µF * R68 32 37 22 448 0.8 1.04 6.20

27.5 BN274L0124+- - 1000/450 120nF 16 31.7 19.6 10.2 960 0.8 1.82 x 10-2 0.76

27.5 BN274L0224+- - 220nF P0 31.7 22.6 13.7 1600 0.8 6.12 x 10-2 1.38

27.5 BN274L0334+- - 330nF 18 31.7 26.2 15.2 1280 0.8 1.38 x 10-1 2.08

27.5 BN274L0474+- - 470nF 19 31.7 30.2 17.7 1040 0.8 2.79 x 10-3 2.96

27.5 BN274L0684+- - 680nF 26 31.7 31.6 21.2 448 0.8 5.85 x 10-3 4.28

27.5 BN274L0914+- - 910nF * R68 32 37 22 448 0.8 1.05 5.72

*only available standard bulk: no special lead length

Replace the + by the tolerance code: J=5% - K=10% - M=20%

Replace the - - by the packaging suffix: - - = standard bulk - EN = taping on reel etc

For values biggers –> see FFB range

(1): MOQ for standard bulk suffix - -

BN22 Pitch = 22.5mm

BN27 Pitch = 27.5mm

BW 15: TIP & RING 15 Radial leads-250 V-

DESCRIPTION

Non inductive, stacked, self healing, metallised polyester

film capacitor. Insulated thermoplastic casing, polyurethane

resin sealed. Radial connections. Also available in SMD

version. (see below)

APPLICATIONS

AVX’s « TIP & RING » or « ringer » metallised polyester film

capacitors are designed as a standard telecom filter to block

–48 Volts DC telephone line voltage and pass subscriber’s AC

signal pulse (16 to 25 Hz, 70 to 90 Vrms). The typical ringing

Signal is shown in the enclosed figure. The ringer film

capacitors are ideal for telecom/modem applications. This is a

complement range to the AVX’s ceramic one.

STANDARDISATION

Generic specifications:

CEI 384-1/CECC 30000/UTE 83100

Sectional specifications:

CEI 384-2/CECC 30400/UTE 83151

millimeters (inches)

DIMENSIONS

Size Case (mm)

DV/DT I2t Ur-/Ur~

(V/µsec) (A2.sec) 250/100

L max H max e max LS ±0,4 Ø

+10%-0,05 Capacitance

6 17,5(0,689) 10,50(0,413) 5(0,197) 15(0,591) 0,80(0,031) 430 0,166 470 nF

7 17,5(0,689) 13,5(0,531) 5(0,197) 15(0,591) 0,80(0,031) 300 0,183 680 nF

15 7 17,5(0,689) 13,5(0,531) 5(0,197) 15(0,591) 0,80(0,031) 300 0,276 820 nF

8 17,5(0,689) 13,5(0,531) 6,25(0,246) 15(0,591) 0,80(0,031) 300 0,405 1µF

9 17,5(0,689) 14,5(0,571) 8,50(0,335) 15(0,591) 0,80(0,031) 50 0,159 1,5µF

9 17,5(0,689) 14,5(0,571) 8,50(0,335) 15(0,591) 0,80(0,031) 50 0,336 2,2µF

DIMENSIONS AND CAPACITANCE VALUES

HOW TO ORDER

BW15 4 G 0105 K

Type Class

PET

Voltage

250V

Capacitance

Value

EIA code

Tolerance

±10%

Suffix

BW 15: TIP & RING 15 Radial leads-250 V-

PERFORMANCE CHARACTERISTICS MARKING

Climatic category 55 / 100 / 56

Capacitance (Cr) See table

Tolerance ±5% ±10 %

Nominal voltage 250 V-

Test voltage (1.4Ur-2sec) 350 V-

Category voltage Ur at 100°C

Tangent of loss angle at 1Khz (DF) < 80. 10-4

Insulation resistance between terminals under 100V- Ir * C> 1 Gohm µF

Insulation resistance between terminals and case > 30 Gohms

Logo

Type

Nominal capacitance

Tolerance(EIA code)

DC nominal voltage

TBW1 µ0 K

250 V-

SUFFIX -- EN LG KB KC KE KH K7

Connections

bulk length=

25mm±1

Connections

bulk length=

9mm±0.5

Connections

bulk length=

5mm±0.5

Connections

bulk length=

4mm±0.5

Connections

bulk length=

3.5mm±0.5

Connections

bulk length=

3.2mm±0.4

Tape§reelDescription Connections

bulk length=

6mm±0.5

SCHEMATIC DRAWING

« TIP&RING » GRAPH MOQ= primary packaging

250V

-48V

-250V

-400ms 200ms/div 1.6s

Tip & Ring

6+0/-1

15 ±0.4

0.2 mini

Length

0.8

Height

Size Case Reel (EN) Bulk (—)

Minimum Quantity

15640006000

15 7 40006000

15 8 3332 6000

15 9 25008000

FILM CHIP CAPACITORS

« TIP&RING » film chip capacitors are designed also as a standard telecom filter

BW 15: TIP & RING 15 Radial leads-250 V-

Standard range

Extended range

Size Code H max

470 nF 0474 5040/4030 4.6/5.5

680 nF 0684 6054/5040 4.4/4.6

820 nF 0824 6054/5040 5/5.7

1 µF 0105 6054/5040 5.7/6.6

1.5 µF 0155 6054 5.9

PART NUMBER SCHEME

CF 18 2 G 0105 K

Type Size Equivalent Class

2=PET HT

Voltage

250 V =G

code EIA

Tolerance Suffix

Capacitance

Value

10%=K

PERFORMANCE CHARACTERISTICS AND PACKAGING: see catalog film chip capacitors

NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office

for the latest specifications. All statements, information and data given herein are believed to be

accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind,

expressed or implied. Statements or suggestions concerning possible use of our products are made

without representation or warranty that any such use is free of patent infringement and are not

recommendations to infringe any patent. The user should not assume that all safety measures are

indicated or that other measures are indicated or that other measures may not be required.

Specifications are typical and many not apply to all applications.