0.30 ± 0.20
(.012 ± .008)
0.25 ± 0.20
(.010 ± .008)
0.55 ± 0.10
(.022 ± .004)
2.10 ± 0.20
(.083 ± .008)
4.00 ± 0.20
(.157 ± .008)
0.50 ± 0.20
(.020 ± .008)
0.35 ± 0.20
(.014 ± .008)
0.80 ± 0.10
(.032 ± .004)
0.30 +0.10/-0.20
(.012 +.004/-.008)
DIA.
0.40 ± 0.20
(.016 ± .008)
Features
Concave terminals
RoHS compliant*
8 bit multiple applications
Smallest bussed chip array
E 24 Series from 10 ohms to 1 megohm
CAT25 - Thick Film Chip Resistor Arrays
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications
How To Order
CA T 25 - 103 J A LF
Product
CA = Chip Array
Pin Style
T = Concave
Model
Resistance Value
103 = 10K ohms
Tolerance
J = 5 %
Electrical Circuit
A = 8 Resistors, Bussed Type
Terminations
LF = Tin-plated (RoHS compliant)
For Standard Values Used in
Capacitors, Inductors, and Resistors,
click here.
Electrical Characteristics
Parameters CAT25 Test Method
Number of Resistors 8
Resistance Range E24 10 ohms to 1 megohm
Resistance Tolerance 5 % JIS-C-5202.5.1
Power Rating/Resistor 62.5 mW
Rating Temperature +70 °C
T.C.R. ±200 ppm/°C JIS-C-5202.5.2
Maximum Operating Voltage 25 V
Operating Temperature -55 °C to +125 °C
Environmental Characteristics
Specifi cation Characteristics Test Method
Short Time Overload ±(3 % +0.1 ohm) JIS-C-5202.5.5
Load Life ±(5 % +0.1 ohm) JIS-C-5202.7.10
Humidity Load Life ±(3 % +0.1 ohm) JIS-C-5202.7.9
Resistance to Soldering Heat ±(1 % +0.1 ohm) JIS-C-5202.6.4
Terminal Strength ±(1 % +0.1 ohm) JIS-C-5202.6.
Temperature Cycle ±(2 % +0.1 ohm) JIS-C-5202.7.4
Vibration ±(1 % +0.1 ohm) JIS-C-5202.6.3
Insulation Resistance 1000 megohms minimum JIS-C-5202.5.6
Dielectric Withstanding Voltage 50 VRMS JIS-C-5202.5.7
Lead Solderability >95 % JIS-C-5202.6.5
Outline Drawing Land Pattern
0.80
(.032)
0.4 - 0.5
(.016 - .020)
2.8 - 3.0
(.110 - .118)
3.3 - 3.4
(.130 - .133)
4.8 - 5.2
(.190 - .205)
0.9 - 1.1
(.035 - .043)
3.2 - 3.5
(.125 - .138)
DIMENSIONS: MM
(INCHES)
Electrical Circuit
*RoHS COMPLIANT
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications
CAT25 - Thick Film Chip Resistor Arrays
Soldering Profi le for RoHS Compliant Chip Resistors and Arrays
25
75
125
175
225
275
0 50 100 150 200 250 300
Time (seconds)
Temperature (°C)
60 - 120 seconds
60 - 90
seconds
260 °C peak
190 °C
150 °C
220 °C
Ramp Down
6 °C/second
255 °C
Maximum of 20 seconds between
+255 °C and +260 °C
Ramp Up
3 °C/second maximum
10 seconds minimum
<1>
<1>
Packaging
12
(.472) embossed tape
4,000 pcs. per reel
Substrate Alumina 96
Element Ruthenium Oxide
Coating Glass
Terminal Plated Ni+Sn
Material
REV. 06/11