IRF9540, RF1S9540SM Data Sheet 19A, 100V, 0.200 Ohm, P-Channel Power MOSFETs These are P-Channel enhancement mode silicon gate power field effect transistors. They are advanced power MOSFETs designed, tested, and guaranteed to withstand a specified level of energy in the breakdown avalanche mode of operation. All of these power MOSFETs are designed for applications such as switching regulators, switching convertors, motor drivers, relay drivers, and drivers for high power bipolar switching transistors requiring high speed and low gate drive power. They can be operated directly from integrated circuits. Formerly Developmental Type TA17521. Ordering Information PART NUMBER PACKAGE January 2002 Features * 19A, 100V * rDS(ON) = 0.200 * Single Pulse Avalanche Energy Rated * SOA is Power Dissipation Limited * Nanosecond Switching Speeds * Linear Transfer Characteristics * High Input Impedance * Related Literature - TB334 "Guidelines for Soldering Surface Mount Components to PC Boards" Symbol BRAND IRF9540 TO-220AB IRF9540 RF1S9540SM TO-263AB RF1S9540 D G NOTE: When ordering, use the entire part number. Add the suffix 9A to obtain the TO-263AB variant in the tape and reel, i.e., RF1S9540SM9A. S Packaging JEDEC TO-220AB JEDEC TO-263AB SOURCE DRAIN GATE DRAIN (FLANGE) (c)2002 Fairchild Semiconductor Corporation DRAIN (FLANGE) GATE SOURCE IRF9540, RF1S9540SM Rev. B IRF9540, RF1S9540SM TC = 25oC, Unless Otherwise Specified Absolute Maximum Ratings Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDS Drain to Gate Voltage (RGS = 20k) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID TC = 100oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS Maximum Power Dissipation (Figure 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Linear Derating Factor (Figure 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single Pulse Avalanche Energy Rating (Note 4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TJ, TSTG Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg IRF9540, RF1S9540SM -100 -100 -19 -12 -76 20 150 1 960 -55 to 175 UNITS V V A A A V W W/oC mJ oC 300 260 oC oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 150oC. Electrical Specifications TC = 25oC, Unless Otherwise Specified PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS V Drain to Source Breakdown Voltage BVDSS ID = -250A, VGS = 0V (Figure 10) -100 - - Gate to Threshold Voltage VGS(TH) VGS = VDS, ID = -250A -2 - -4 V VDS = Rated BVDSS, VGS = 0V - - -25 A A Zero Gate Voltage Drain Current IDSS VDS = 0.8 x Rated BVDSS, VGS = 0V, TC = 125oC On-State Drain Current (Note 2) ID(ON) Gate to Source Leakage Current IGSS Drain to Source On Resistance (Note 2) Forward Transconductance (Note 2) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Gate Charge (Gate to Source + Gate to Drain) Gate to Source Charge rDS(ON) gfs td(ON) tr td(OFF) VGS = 20V Qg(TOT) Qgs Qgd Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS LD LS Thermal Resistance Junction to Case RJC Thermal Resistance Junction to Ambient RJA (c)2002 Fairchild Semiconductor Corporation - -250 - - A - - 100 nA ID = -10A, VGS = -10V (Figures 8, 9) - 0.150 0.200 5 7 - S VDD = -50V, ID 19A, RG = 9.1, RL = 2.3, VGS = -10V, (Figures 17, 18) MOSFET Switching Times are Essentially Independent of Operating Temperature - 16 20 ns - 65 100 ns - 47 70 ns - 28 70 ns VGS = -10V, ID = -19A, VDS = 0.8 x Rated BVDSS, Ig(REF) = -1.5mA (Figures 14, 19, 20) Gate Charge is Essentially Independent of Operating Temperature - 70 90 nC - 14 - nC - 56 - nC VDS = -25V, VGS = 0V, f = 1MHz (Figure 11) - 1100 - pF - 550 - pF - 250 - pF - 3.5 - nH - 4.5 - nH - 7.5 - nH - - 1 oC/W - - 62.5 oC/W Measured From the Contact Screw on Tab to the Center of Die Measured From the Drain Lead, 6mm (0.25in) from Package to the Center of Die Internal Source Inductance -19 VDS > ID(ON) x rDS(ON) MAX, ID = -6A (Figure 12) tf Gate to Drain "Miller" Charge Internal Drain Inductance VDS > ID(ON) x rDS(ON) MAX, VGS = -10V Measured From the Source Lead, 6mm (0.25in) From Package to Source Bonding Pad Typical Socket Mount Modified MOSFET Symbol Showing the Internal Devices Inductances D LD G LS S IRF9540, RF1S9540SM Rev. B IRF9540, RF1S9540SM Source to Drain Diode Specifications PARAMETER SYMBOL Continuous Source to Drain Current Pulse Source to Drain Current (Note 3) ISD ISDM TEST CONDITIONS Modified MOSFET Symbol Showing the Integral Reverse P-N Junction Diode MIN TYP MAX - - -19 UNITS A - - -76 A - - -1.5 V - 170 - ns - 0.8 - C D G S Source to Drain Diode Voltage (Note 2) Reverse Recovery Time VSD trr Reverse Recovery Charge QRR TC = 25oC, ISD = -19A, VGS = 0V (Figure 13) TJ = 150oC, ISD = 19A, dISD/dt = 100A/s TJ = 150oC, ISD = 19A, dISD/dt = 100A/s NOTES: 2. Pulse test: pulse width 300s, duty cycle 2%. 3. Repetitive rating: pulse width limited by maximum junction temperature. See Transient Thermal Impedance curve (Figure 3). 4. VDD = 25V, starting TJ = 25oC, L = 4mH, RG = 25, peak IAS = 19A. (Figures 15, 16). Unless Otherwise Specified 1.2 -20 1.0 -20 ID, DRAIN CURRENT (A) POWER DISSIPATION MULTIPLIER Typical Performance Curves 0.8 0.6 0.4 0.2 0 25 0 125 50 75 100 TC , CASE TEMPERATURE (oC) 150 175 -15 -10 -5 0 25 75 175 125 TC, CASE TEMPERATURE (oC) FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE ZJC, TRANSIENT THERMAL IMPEDANCE (oC/W) 1 0.5 0.2 0.1 PDM 0.1 0.05 t1 0.02 0.01 t2 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x RJC + TC SINGLE PULSE 0.01 10-5 10-4 10-3 10-2 10-1 t1 , RECTANGULAR PULSE DURATION (s) 1 10 FIGURE 3. NORMALIZED MAXIMUM TRANSIENT THERMAL IMPEDANCE (c)2002 Fairchild Semiconductor Corporation IRF9540, RF1S9540SM Rev. B IRF9540, RF1S9540SM Typical Performance Curves Unless Otherwise Specified (Continued) 200 -100 VGS = -16V 100 ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 10s 100s 1ms 10 10ms 100ms OPERATION IN THIS AREA IS LIMITED BY rDS(ON) 1 DC TC = 25oC TJ = MAX RATED 0.1 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX -80 VGS = -12V -60 VGS = -10V -40 VGS = -9V VGS = -8V -20 VGS = -5V SINGLE PULSE 1 0 10 100 VDS, DRAIN TO SOURCE VOLTAGE (V) 500 0 VGS = -12V -40 VGS = -10V VGS = -9V -30 VGS = -8V -20 VGS = -7V VGS = -6V -10 0 0 -2 -4 VGS = -5V VGS = -4V -6 -8 -10 -100 TJ = 125oC -1 TJ = 25oC TJ = -55oC -0.1 0 -2 VGS = -20V 0.14 0.10 -20 -40 -60 ID, DRAIN CURRENT (A) -80 -100 NOTE: Heating effect of 2s pulse is minimal. FIGURE 8. DRAIN TO SOURCE ON RESISTANCE vs GATE VOLTAGE AND DRAIN CURRENT (c)2002 Fairchild Semiconductor Corporation -14 2.0 NORMALIZED DRAIN TO SOURCE ON RESISTANCE RESISTANCE () rDS(ON), DRAIN TO SOURCE ON VGS = -10V 0 -12 -4 -6 -8 -10 VGS, GATE TO SOURCE VOLTAGE (V) FIGURE 7. TRANSFER CHARACTERISTICS PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 0.18 -50 -10 FIGURE 6. SATURATION CHARACTERISTICS 0.22 VGS = -4V -40 -30 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VDS, DRAIN TO SOURCE VOLTAGE (V) 0.26 -20 FIGURE 5. OUTPUT CHARACTERISTICS IDS(ON), DRAIN TO SOURCE CURRENT (A) ID, DRAIN CURRENT (A) VGS = -16V PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VGS = -14V -10 VGS = -7V VGS = -6V VDS, DRAIN TO SOURCE VOLTAGE (V) FIGURE 4. FORWARD BIAS SAFE OPERATING AREA -50 VGS = -14V 1.5 VGS = -10V, ID = 10A PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 1.0 0.5 0.2 -40 0 40 80 120 TJ, JUNCTION TEMPERATURE (oC) 160 FIGURE 9. NORMALIZED DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE IRF9540, RF1S9540SM Rev. B IRF9540, RF1S9540SM Typical Performance Curves Unless Otherwise Specified (Continued) 2000 1.15 0.95 0.85 CISS 1200 800 COSS 400 CRSS 0 0.75 -40 0 40 80 120 TJ, JUNCTION TEMPERATURE (oC) -10 0 160 -30 -20 -50 -40 VDS, DRAIN TO SOURCE VOLTAGE (V) FIGURE 10. NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE vs JUNCTION TEMPERATURE FIGURE 11. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE 100 15 12 ISD, SOURCE TO DRAIN CURRENT (A) PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX gfs, TRANSCONDUCTANCE (S) VGS = 0V, f = 1MHz CISS = CGS + CGD CRSS = CGD COSS CDS + CGD 1600 1.05 C, CAPACITANCE (pF) NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE ID = 250A TJ = -55oC 9 TJ = 25oC TJ = 125oC 6 3 -20 -40 -60 ID, DRAIN CURRENT (A) -80 TJ = 150oC TJ = 25oC 10 1 0.1 0.4 0 0 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX -100 0.8 1.0 1.2 1.4 1.6 1.8 VSD, SOURCE TO DRAIN VOLTAGE (V) FIGURE 12. TRANSCONDUCTANCE vs DRAIN CURRENT FIGURE 13. SOURCE TO DRAIN DIODE VOLTAGE 0 VGS, GATE TO SOURCE (V) 0.6 ID = -19A -5 VDS = -20V VDS = -50V -10 VDS = -80V 0 20 40 60 Qg(TOT) , GATE CHARGE (nC) 80 FIGURE 14. GATE TO SOURCE VOLTAGE vs GATE CHARGE (c)2002 Fairchild Semiconductor Corporation IRF9540, RF1S9540SM Rev. B IRF9540, RF1S9540SM Test Circuits and Waveforms VDS tAV L 0 VARY tP TO OBTAIN - RG REQUIRED PEAK IAS + VDD DUT 0V VDD tP VGS IAS IAS VDS tP 0.01 BVDSS FIGURE 15. UNCLAMPED ENERGY TEST CIRCUIT FIGURE 16. UNCLAMPED ENERGY WAVEFORMS tON tOFF td(OFF) td(ON) tr 0 RL - DUT VGS + 10% 10% VDS VDD RG tf 90% 90% VGS 0 10% 50% 50% PULSE WIDTH 90% FIGURE 17. SWITCHING TIME TEST CIRCUIT -VDS (ISOLATED SUPPLY) CURRENT REGULATOR FIGURE 18. RESISTIVE SWITCHING WAVEFORMS 0 VDS DUT 12V BATTERY 0.2F 50k 0.3F Qgs Qg(TOT) DUT G VGS Qgd D VDD 0 S Ig(REF) IG CURRENT SAMPLING RESISTOR 0 +VDS ID CURRENT SAMPLING RESISTOR FIGURE 19. GATE CHARGE TEST CIRCUIT (c)2002 Fairchild Semiconductor Corporation Ig(REF) FIGURE 20. GATE CHARGE WAVEFORMS IRF9540, RF1S9540SM Rev. B TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM FRFETTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MicroPakTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM STAR*POWERTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM TruTranslationTM UHCTM UltraFET VCXTM STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4