C&K TS Series Tiny Slide Switches Features/Benefits * Reliable contact design ensures long electrical life * Ratings up to 3 AMPS * Epoxy terminal-seal compatible with bottom wash cleaning * RoHS compliant Typical Applications * Test & measurement equipment * Computers & peripherals * Telecommunications & networking equipment Models Available Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material (TS01 Model): 3 AMPS @ 120 V AC or 28 V DC; (TS02, TS03 Models): 1 AMP @ 120 V AC or 28 V DC. See page I-10 for additional ratings. ELECTRICAL LIFE: TS01 MODELS: 60,000 make-and-break cycles at full load. TS02, TS03 MODELS: 30,000 cycles. CONTACT RESISTANCE: Below 20 m typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: -30C to 85C SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or diallyl phthalate (DAP) (UL 94V-0). ACTUATOR: Nylon, black standard. HOUSING: Stainless steel or stainless steel, nickel plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page I-10 for additional contact materials. CENTER CONTACT & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page J-9 for additional contact materials. TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical Data chapter. NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-8 and J-9. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all "bottom-wash" PCB cleaning methods. Switch Function TS01 SPDT On-None-On TS02 SPST Off-None-On TS03 SPDT On-Off-On Terminations A Right angle, PC thru-hole (TS01 & TS03 models only) C PC Thru-hole W Wire wrap Contact Material B Gold Q Silver K Gold, tin-lead M Silver, tin-lead G Gold over silver L Gold over silver, tin-lead P Gold, matte-tin S Silver, matte-tin R Gold over silver, matte-tin Seal E Epoxy F Epoxy seal and splashproof RTV latex rubber seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J-7 www.ittcannon.com J Slide Specifications C&K TS Series Tiny Slide Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 NO. POLES MODEL NO. POS. 1 C&K marking on opposite side TS01 ON NONE ON TS03 ON OFF ON TS02 OFF NONE ON CONNECTED TERMINALS POS. 2 C&K marking on opposite side 1-2 SP J POS. 3 OPEN SCHEMATIC 2-3 SPDT OPEN N/A 3-1 SPST Slide SPDT TS02 models: Omit center terminal Terminal Nos. For Reference Only Part number shown: TS01CBE All models with all options when ordered with G, L, M, Q, R or S contact material. TS02 model not available with A terminations. TERMINATIONS C W PC THRU-HOLE WIRE WRAP PC MOUNTING TS02 models: Omit center hole SPDT and SPST A SPDT and SPST RIGHT ANGLE, PC THRU-HOLE PC MOUNTING TS01ABE Horizontal Actuation SPDT Actuator shown in pos. 1 Not available with TS02 model. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J-8 www.ittcannon.com C&K TS Series Tiny Slide Switches CONTACT MATERIAL OPTION CODE RoHS COMPLIANT RoHS COMPLIANT B YES YES K NO YES P YES YES Q YES YES M NO YES S YES YES G YES YES CONTACT MATERIAL GOLD 3 GOLD 1 NO YES R YES YES TIN-LEAD 6 LOW LEVEL/DRY CIRCUIT MATTE-TIN 7 0.4 VA MAX. @ 20 V AC OR DC MAX. GOLD 3 SILVER 4,5 TIN-LEAD 6 MATTE-TIN POWER SILVER 2,3 TS01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. TS02, TS03 MODELS: 1 AMP @ 120 V AC OR 28 V DC. 7 GOLD 3 GOLD OVER L RATINGS TERMINAL PLATING TIN-LEAD 6 LOW LEVEL/DRY CIRCUIT OR POWER MATTE-TIN 7 TS01 MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC. TS02, TS03 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 1 AMP @ 120 V AC OR 28 V DC. Slide * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. All models 2 END CONTACTS: Coin silver, with gold plate over nickel plate. B contact material standard with A and W terminations. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. Q contact material standard with C terminations. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. 7 TERMINALS: Copper alloy, with matte-tin over nickel plate with all options when ordered with G, L, M,S or R contact material. NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. SEAL E F EPOXY SEAL EPOXY SEAL AND SPLASHPROOF RTV LATEX RUBBER SEAL NOTE: RTV latex rubber seal peels off easily after installation. Epoxy terminal seal standard. Not available with A termination. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J-9 J www.ittcannon.com