RoHS RJ45 SINGLE PORT WITH MAGNETICS 100 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz 0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265C Rise Time: 2.5nano-seconds from 10 to 90 percent RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0C to +70C (see footnote) Industrial operating temp: -40C to +85C (see footnote) Part Number OCL(uH min) @100KHz/0.1V with 8mA DC Bias Turns Ratio chip: cable (3%) EMI Fingers LED (L/R) AR1009-1326_ 350 1CT:1CT YES G/Y Part Number Return Loss (dB Min) Insertion Loss (dB Max) 0.5-100MHz 0.5-30MHz 30.1-60MHz 60.1-80MHz 1.1 18 18-20*LOG(f/30) 12 Cross talk (dB Min) CMRR (dB Min) 0.5-40MHz 40.1-100MHz 0.5-100MHz 35 33-20*LOG(f/50) 30 AR1009-1326_ HI-POT (VDC) 2250 *Complete part number by inserting "S" for Standard Temp. or "I" for Industrial Temp. All specifications subject to change without notice. 15.90 AR1009-1326_ ALLIED MECHANICAL LED-L LED-R 3.5 13.50 21.35 4.90 3.38 2.54 3.05 P9 P10 P11 P12 8.89 Unless otherwise specified all tolerances are: 0.25 in mm 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1511/12/10 www.alliedcomponents.com RoHS RJ45 SINGLE PORT WITH MAGNETICS SCHEMATICS: 1CT:1CT R4 R3 R2 R1 1CT:1CT C1 Unliess Otherwise Specified all tolerances are: 0.25mm Notes: 1. R1-R4=75 Ohms, 1/16W, 5% Resisitors. 2. C1=1000pF, 2KV Decouping Capacitor. 3. LED Compliant with IEC60825-1 Safety of Laser Products when operated up to 20mA. 4. LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW. LED Peak Wavelength: Green=565nm, Yellow=585Nm PCB Layou t: 15.49 10.92 12.65 7.57 11.43 2.54 0.61 9 1 3. 05 10 8. 89 3.38 4.9 11 12 2. 54 1.27 2.54 8.89 All Dimensions Tolerances Unless Otherwise Specified are: 0.05mm Materials and Finish: Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 025mm thick, 80+150u" nickel plating. Mod Jack Contact: Phospher Bronze, 0.35mm thick, Gold Plated. LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1511/12/10 www.alliedcomponents.com