RJ45 SINGLE PORT WITH MAGNETICS
15
ALLIED COMPONENTS INTERNATIONAL
714-665-1140www.alliedcomponents.com
RoHS
REVISED 11/12/10
MECHANICAL
Unless otherwise specified all tolerances are: ± 0.25 in mm
All specifications subject to change without notice.
Insertion Loss
(dB Max)
0.5-100MHz 0.5-30MHz 30.1-60MHz 60.1-80MHz
AR1009-1326_
1CT:1CT YES G/Y 1.1 18 18-20*LOG(f/30) 12
OCL(uH min) @100KHz/0.1V
with 8mA DC Bias
350
30 225033-20*LOG(f/50)
EMI
Fingers
LED
(L/R)
Part
Number
Return Loss
(dB Min)
Turns Ratio
chip: cable
(±3%)
HI-POT
(VDC)
Part
Number
CMRR
(dB Min)
Cross talk
(dB Min)
0.5-100MHz0.5-40MHz
35
40.1-100MHz
AR1009-1326_
*Complete part number by inserting “S” for Standard Temp. or “I” for Industrial Temp.
Always EU RoHS/ELV Compliant, wave solder capable to 265°C
RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F
Standard operating temp: 0ºC to +70ºC (see footnote)
Industrial operating temp: -40ºC to +85ºC (see footnote)
100 Base-T Ethernet Application
Meets IEEE 802.3 & ANSI X 3.263 standards
Impedance: 100OHMS
Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz
0.1VRMS with 8mA DC Bias
Rise Time: 2.5nano-seconds from 10 to 90 percent
2.54
13.50
8.89
3.05
21.35
15.90
LED-RLED-L
3.5
3.38
4.90
P9
P10
P11
P12
ALLIED
AR1009-1326_
RJ45 SINGLE PORT WITH MAGNETICS
15
ALLIED COMPONENTS INTERNATIONAL
714-665-1140www.alliedcomponents.com
RoHS
REVISED 11/12/10
PCB Layou t:
11
12
1
2. 54
3. 05
8. 89
15.49
10.92
2.54
1.27
9
8.89
4.9
3.38
10
0.61
2.54
12.65
7.57
11.43
SCHEMATICS:
C1
1CT:1CT
1CT:1CT
R1
R2
R3
R4
All Dimensions Tolerances Unless Otherwise Specified are: ±0.05mm
Unliess Otherwise Specified all tolerances are: ±0.25mm
Notes:
1. R1-R4=75 Ohms, 1/16W, 5% Resisitors.
2. C1=1000pF, 2KV Decouping Capacitor.
3. LED Compliant with IEC60825-1 Safety of Laser Products when operated up to 20mA.
4. LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW. LED Peak Wavelength: Green=565nm, Yellow=585Nm
Materials and Finish:
Housing: PBT, Flammability Rating 94V-O.
Shell: C2680 Brass, 025mm thick, 80+150u” nickel plating.
Mod Jack Contact: Phospher Bronze, 0.35mm thick, Gold Plated.
LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads.
