DC/DC Converters TES 1 Series, 1 Watt Features Small SMD package with standard footprint I/O isolation 1500 VDC Unregulated device Single and dual output models Input voltage 5, 12 and 24 VDC High efficiency up to 80% Operating temperature range -40C to +90C High accuracy of pin co-planarity Qualified for leadfree reflow solder With their small footprint these 1Watt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical ap- process according IPC/JEDEC J-STD-020C plications are ground loop elimination, noise reduction, voltage isolation in digital Available in tape and reel package 3-year product warranty interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Order code Input voltage Output voltage Output current max. Efficiency typ. TES 1-0510 3.3 VDC 300 mA 73 % TES 1-0511 5 VDC 200 mA 78 % TES 1-0519 9 VDC 110 mA 78 % TES 1-0512 5 VDC 10% 12 VDC 85 mA 78 % TES 1-0513 (nominal 5 VDC) 15 VDC 65 mA 79 % TES 1-0521 5 VDC 100 mA 74 % TES 1-0522 12 VDC 40 mA 78 % TES 1-0523 15 VDC 35 mA 78 % TES 1-1211 5 VDC 200 mA 76 % TES 1-1219 9 VDC 110 mA 78 % 12 VDC 85 mA 79 % 15 VDC 65 mA 80 % 5 VDC 100 mA 74 % TES 1-1222 12 VDC 40 mA 78 % TES 1-1223 15 VDC 35 mA 79 % TES 1-2411 5 VDC 200 mA 78 % TES 1-2419 9 VDC 110 mA 77 % TES 1-2412 12 VDC 85 mA 77 % 15 VDC 65 mA 79 % 5 VDC 100 mA 73 % TES 1-1212 TES 1-1213 TES 1-1221 TES 1-2413 TES 1-2421 12 VDC 10% (nominal 12 VDC) 24 VDC 10% (nominal 24 VDC) TES 1-2422 12 VDC 40 mA 78 % TES 1-2423 15 VDC 35 mA 78 % http://www.tracopower.com Page 1 of 4 DC/DC Converters TES 1 Series 1 Watt Input Specifications Input current no load / full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 15 mA / 110 mA typ. 24 Vin models: 8 mA / 55 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Reverse voltage protection 0.3 A max. Input filter internal capacitors Output Specifications Voltage set accuracy - 5 VDC models: 2 % at 60 % load - other models: 2 % at 100 % load Voltage balance (dual output models, balanced load) 1 % max. Regulation - Input variation 1.2 % / 1 % change Vin - Load variation see graphs below Ripple and noise (20 MHz Bandwidth) 120 mVpp max. Temperature coefficient 0.02 %/K Short circuit protection limited 0.5 sec. max. Capacitive load 33 F max. (each output) General Specifications Temperature ranges - Operating -40C to +90C - Storage -50C to +125C - Case +105C max. Derating (convection cooling) 3.3 %/K above +75C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >2'000'000 h Isolation voltage (60sec.) - Input/Output 1`500 VDC Isolation capacitance - Input/Output 40 pF typ. Isolation resistance - Input/Output >1`000 Mohm Switching frequency 100 kHz typ. (frequency modulation) Frequency change over line and load 30 % Environmental compliance - Reach www.tracopower.com/overview/tes1 - RoHS RoHS directive 2011/65/EU Output voltage variation dependent on load (at nominal input voltage) other models: +10% max. 0% typ. min. -10% 0 50% Load 100% Deviation of Vout nom. Deviation of Vout nom. 5 VDC models: +10% max. typ. min. 0% -10% 0 50% Load 100% All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TES 1 Series 1 Watt Physical Specifications Casing material plastic (UL94V-0 rated) Weight single output models: 1.7 g (0.06oz) dual output models: 2.0 g (0.08oz) Lead-free reflow solder process as per J-STD-020D.1 (to find at: www.jedec.org - free registration equired) Peak package body temperature: 245C Moisture sensivity level (MSL) level 2 as per J-STD-033B.1 (to find at: www.jedec.org - free registration required) Washing process not recommended. Product non-hermetical Supporting documents: www.tracopower.com/overview/tes1 Outline and Solder Pad Dimensions TES 1 Single Output Models 2.54 (0.1) 5.08 (0.2) 7.0 0.5 (0.28 0.02) Single 1 -Vin (GND) 2 +Vin (Vcc) 4 -Vout 5 +Vout 8 *NC S SEATING PLANE 1.5 (0.06) 0.3 (0.01) 6.7 (0.26) Pin * Pin to be isolated from circuitry ( Magnification of A ) 13.7 (0.54) 0.60 (0.02) 0~ 4 3.04 4 2 R 0. 5 1 (0.12) 5 8 11.0 0.2 (0.43 0.008) 3.0 (0.12) (0.12) 0.25 [0.01] O1.0 (O 0.04) vent hole (for reflow soldering process) 8.0 (0.31) 3.0 Pin-Out 5.5 (0.22) 5.5 (0.22) 1.5 (0.06) 0.15 S Solder Pad Dimension 1.0 min. 1.6 (0.46) 11.6 (0.07) (0.04) Dimensions in [mm], () = Inch Pin pitch tolerances: 0.10 (0.004) Other tolerances: 0.25 (0.01) http://www.tracopower.com 2.54 5.08 (0.10) (0.10) Page 3 of 4 DC/DC Converters TES 1 Series 1 Watt Outline and Solder Pad Dimensions TES 1 Dual Output Models (0.2) Pin Dual 1 -Vin (GND) 2 +Vin (Vcc) 4 Common 5 -Vout 7 +Vout 10 *NC * Pin to be isolated from circuitry ( Magnification of A ) S SEATING PLANE 1.5 [0.06] 0.3 (0.01) 0.60 (0.02) 0.25 [0.01] (0.1) 6.7 (0.26) 16.24 (0.64) 2.54 0~ 4 (0.1) 5.08 R 0. 5 2.54 5 11.0 0.2 (0.43 0.008) 4 2 7.0 0.5 (0.28 0.02) 3.0 (0.12) 1 (0.12) 7 10 8.0 (0.31) O1.0 (O 0.04) vent hole (for reflow soldering process) 3.0 (0.12) 3.04 Pin-Out 5.5 [0.22] 5.5 [0.22] 1.5 [0.06] 0.15 S Solder Pad Dimension 1.0 min. 1.6 (0.46) 11.6 (0.07) (0.04) 2.54 5.08 2.54 (0.10) (0.10) (0.10) Dimensions in [mm], () = Inch Pin pitch tolerances: 0.10 (0.004) Other tolerances: 0.25 (0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. June 23, 2020 Page 4 of 4