Corcom
EMI/RFI Filter Product Overview
TE Connectivity oers over 300 solutions for EMI/RFI problems associated with
susceptibility, as well as compliance with international emissions standards. Corcom filters
are available in a wide range of single and 3-phase designs as well as IEC inlet and power
entry modules which can combine several functions to reduce cost, space and labor.
Solutions are also available for DC applications and applications requiring extremely high
performance with feedthrough filters and capacitors for a wide range of applications.
corcom.com
Corcom Filter ProductsTE Connectivity
SERIES
PERFORMANCE
Approvals
Features
ELECTRICAL PARAMETERS
Max. voltage
Current Ratings
Leakage current each Line to Ground
@ 120VAC 60Hz / 250VAC 50Hz
Electrical Setup
Mounting features
Termination inputs
Termination outputs
MECHANICAL PARAMETERS
TYPICAL APPLICATIONS
FILTER TYPE
B Series
General purpose RFI Filters for high
impedance load / low current
•General purpose
•Wide variety of termination options
•Meets low leakage current
requirements of VDE portable
equipment and non-patient medical
equipment
250 VAC
1, 2, 3, 5, 10, 20 or 30A
VB Models: .4 mA / .7 mA
EB Models: .21 mA / .36 mA
Single stage
Screw mounting
.25 [6.3] spade terminals,
8-32 terminal bolt & nut or
wire leads
.25 [6.3] spade terminals,
8-32 terminal bolt & nut or
wire leads
Wide band RFI suppression
for applications requiring low
attenuation including:
•H VAC
•TV / Audio / Video
•Computing & accessories
•Home appliances
•Medical equipment
•Battery charging systems
•Exercise equipment
K Series
General Purpose
250 VAC
1, 2, 3, 5, 10, 20, 30, 40 or 60A
VK Models: .5 mA / 1.0 mA
EK Models: .21 mA / .36 mA
Single stage
Screw mounting (flange or panel)
.25 [6.3] spade terminals,
8-32 terminal bolt & nut,
wire leads or IEC 60320-1 C14 or C20
.25 [6.3] spade terminals,
8-32 terminal bolt & nut or
wire leads
DK Series
250 VAC
1, 3, 6, 10 or 20A
VDK Models: .4 mA / .7 mA
EDK Models: .22 mA / .38 mA
Dual stage
Screw mounting
.25 [6.3] spade terminals,
8-32 terminal bolt & nut or
wire leads
.25 [6.3] spade terminals,
8-32 terminal bolt & nut or
wire leads
Universal filter for applications
requiring improved attenuation
including:
•TV / Audio / Video
•Computing & accessories
•Home appliances
•Medical equipment
•Gaming machines
•Exercise equipment
UL / CSA / VDE
General purpose RFI power line
filters for high impedance loads
•Well suited to applications
where pulsed, continuous and/
or intermittent RFI interference is
present
•EK models meet the very low
leakage current requirements for
VDE portable equipment and non-
patient care medical equipment
•Available with ground line inductor
(choke)
UL / CSA / VDE
Enhanced dierential mode
performance K Series RFI line filters
•Higher performance line to line
attenuation than the K Series
•E version meets the very low
leakage current requirements for
VDE portable equipment and non-
patient care medical equipment
•V version features same high
performance with more
cost-eective design
UL / CSA / VDE
POWER LINE FILTERS
Universal filter for applications
requiring mid-range attenuation
including:
•TV / Audio / Video
•Computing & accessories
•Home appliances
•Medical equipment
•Gaming machines
•Exercise equipment
•Test measurement equipment
corcom.com
Corcom Filter ProductsTE Connectivity
R Series
Two-stage general purpose RFI
power line filter
•Dual T section RFI filter provides
premium performance
•Well suited for low impedance
loads where noisy RFI
environments are present
•Controls pulsed, continuous and/or
intermittent interference
•ER model oers low leakage
current without deterioration of
insertion loss
250 VAC
1, 2, 3, 5, 10 or 20A
VR Models: .4 mA / .7 mA
ER Models: .21 mA / .36 mA
Single stage
Screw mounting (flange or panel)
.25 [6.3] spade terminals,
8-32 terminal bolt & nut,
wire leads or IEC 60320-1 C14
.25 [6.3] spade terminals,
8-32 terminal bolt & nut or
wire leads
EBP, EDP, EOP Series
General Purpose
250 VAC
1, 3, 6 or 10A
EDP/EOP Models: .22 mA / .38 mA
EBP Models: .13 mA / .21 mA
Single stage
PC board pins
PCB pins .025 [.635] square
PCB pins .025 [.635] square
Designed for PCB mounting for a
wide range of applications including:
•Gaming machines
•Cash terminals
•Oce equipment
•Small consumer electronics
•TV / Audio / Video
•Computing & accessories
WG Series
Wide Range Performance
250 VAC
16A
A, B & C Models: .76 mA / 1.27 mA
D, E & F Models: .10 mA / .20 mA
Single stage
Screw-in mounting stud
.25 [6.3] spade terminals,
wire leads or
RAST 5 header interface
.25 [6.3] spade terminals,
wire leads or
RAST 5 header interface
Specially designed for the white
goods / appliance market. Oers
wide band RFI suppression for many
applications including:
•Washing machines / dryers
•Dishwashers
•Refrigerators & freezers
•Coee Machines
•Hand held appliances & tools
•Ovens & ranges
UL / CSA / VDE
PC board mountable general
purpose RFI filters
•General purpose
•Low leakage current
•Cost-eective
•Compact size
•EDP model features enhanced
dierential mode performance
•EBP model features compact size
(less than 1” square)
UL / CSA / VDE
High performance, low cost filter
ideal for appliance equipment
•Cost eective
•Tubular design
•WGD, WGE and WGF versions
designed to comply with leakage
current requirements for appliances
which may be easily moved from
one place to another
•Available in a variety of styles
UL / CSA / VDE
X, Y & Z Series
250 VAC
1, 2, 3, 4 or 6A
.3 mA / .5 mA
Single stage
Screw mount or PC board pins
.25 [6.3] spade terminals or
PCB pins .065[1.65] diagonal
.25 [6.3] spade terminals or
PCB pins .065[1.65] diagonal
RFI filter designed to bring most
digital equipment (including those
with switching power supplies) into
compliance with EN55022, Level
A or B and FCC Part 15J, Class B
conducted emission limits. Ideal for
all applications with limited space
including:
•Switching Power Supplies
•Industrial single phase applications
Chassis or PC Board Mountable
Power Line Filters for Emission
Control
•Compact chassis or PC board
mountable
•Three levels of performance
•Complete filtering solution in
minimal size
•X Series for FCC Part 15J, Class B
•Y Series for EN55022, Level A
•Z Series for EN55022, Level B
•Medical version available in the
HZ Series
UL / CSA / VDE
POWER LINE FILTERS (Continued)
Universal filter for applications with
low impedance loads including:
•Motors
•Semiconductor actuators
•Home appliances
•Gaming machines
•Exercise equipment
•Security systems
•Industrial equipment & controls
corcom.com
Corcom Filter ProductsTE Connectivity
SERIES
PERFORMANCE
Approvals
Features
ELECTRICAL PARAMETERS
Max. voltage
Current Ratings
Leakage current each Line to Ground
@ 120VAC 60Hz / 250VAC 50Hz
Electrical Setup
Mounting features
Termination inputs
Termination outputs
MECHANICAL PARAMETERS
TYPICAL APPLICATIONS
FILTER TYPE
S, V & W Series
Multipurpose Power Line RFI Filter
for Emission Control
•Eective when used to control
emissions in equipment using SCR
and T2L circuits
•S & W Series designed for high
impedance frequencies
•V Series designed for low
impedance frequencies
•Medical version available in the
MV Series
250 VAC
3, 6, 10, 20 & 60A (60A S Series only)
.4 mA / .7 mA (S Series 3-10A)
.75 mA / 1.25 mA (S Series 60A)
.5 mA / .82 mA (V & W Series)
.07 mA / .13 mA (MV Series)
Dual stage
Screw mounting
.25 [6.3] spade terminals or
terminal bolt & nut
.25 [6.3] spade terminals or
terminal bolt & nut
Multipurpose power line RFI filter
for emission control and high
noise industrial environments and
applications that require compliance
with FCC Part 15, Subpart J and
EN55022, Level A, down to 150kHz
including:
•Consumer electronics
•Small machine tools
•Food service equipment
•Measurement & Instrumentation
G & N Series
Wide Range Performance
250 VAC
6 & 10A
.3 mA / .5 mA (EG models)
1.2 mA / 2.0 mA (VG & N models)
Single stage (6A models)
Dual stage (10A models)
Screw mounting
.25 [6.3] spade terminals
.25 [6.3] spade terminals
Specifically designed for most digital
electronic equipment requiring a high
range of symmetric and asymmetric
attenuation including:
•Switching power supplies
•Motor drives
•Small machine tools
•Industrial single-phase applications
SB Series
250 VAC
6, 10, 20 & 30A
.75 mA / 1.25 mA (VSB models)
.22 mA / .36 mA (ESB models)
Single stage
Screw mounting
.25 [6.3] spade terminals or
8-32 terminal bolt & nut
.25 [6.3] spade terminals or
8-32 terminal bolt & nut
Wide band RFI suppression for
applications requiring enhanced
performance including:
•TV / Audio / Video
•Computing & accessories
•Home appliances
•Medical equipment
•Gaming machines
•Exercise equipment
UL / CSA / VDE
High Performance RFI Filters for
Switching Power Supplies For
increased filtering requirements
•Designed to provide excellent
attenuation for most digital
electronics equipment and help
comply with EN55022 Level A and
FCC Part 15J Class B
•Broad frequency range of
performance from 20kHz to 30MHz
•Size and cost-eective solution
UL / CSA / VDE
High Performance B Series RFI Line
Filters
•Enhanced performance version
of our popular B Series of RFI line
filters
•Small size with enhanced
performance
•30A version half the size of other
30A filters
•Low leakage version available
UL / CSA / VDE
POWER LINE FILTERS (Continued)
corcom.com
Corcom Filter ProductsTE Connectivity
SK Series
High Performance K Series RFI Line
Filters for SMPS Emission Control
•Designed to reduce conducted
noise to acceptable limits for
equipment that must comply with
FCC / EN specifications
•Utilizes significantly higher element
values than the general purpose K
Series
•ESK6C and VSK6C incorporate
separate ground circuit inductor
RK Series EMC Series
UL / CSA / VDE
High Performance Compact Power
Line Filter
•Compact
•Single stage
•Significant dierential mode
performance
•Suitable for industrial machinery
•Low input leakage current makes it
suitable for portable equipment
UL / CSA / VDE
Compact and Cost-eective Dual
Stage RFI Power Line Filters
•Compact dual stage filter series
•Current rating up to 30A
•High dierential mode attenuation
in the lower frequency range
•High common mode performance
•Ideal for switching mode power
supplies
UL / CSA / VDE
IK Series
Wide Range Performance
Single and 2-phase RFI Filters for
Industrial Applications
•Excellent performance for
applications with high interference
levels
•Designed for single or two-phase
applications
•Available touch safe terminals
provide easy connections and
prevent inadvertent contact
POWER LINE FILTERS (Continued)
250 VAC
3, 6, 10, 20, 30 & 40A
.4 mA / .7 mA (3-10A VSK models)
.21 mA / .36 mA (3-10A ESK models)
.75 mA / 1.25 mA (3-10A VSK models)
.3 mA / .5 mA (3-10A ESK models)
Single stage
Screw mounting (flange or panel)
.25 [6.3] spade terminals,
terminal bolt & nut,
wire leads or IEC 60320-1 C14
.25 [6.3] spade terminals,
terminal bolt & nut or
wire leads
Universal filter for consumer
electronic applications requiring
a premium range of attenuation
including:
•TV / Audio / Video
•Computing & accessories
•Home appliances
•Medical equipment
•Industrial equipment & controls
•Exercise equipment
250 VAC
3, 6, 10, 15 & 20A
.16 mA / .26 mA
Single stage
Screw mounting
.25 [6.3] spade terminals
.25 [6.3] spade terminals
Wide band RFI suppression
for applications requiring high
attenuation level including:
•Consumer electronics
•Industrial machinery equipment
•Small machine tools
•Home appliances
•Power supplies
250 VAC
3, 6, 10, 15, 20 & 30A
.21 mA / .43 mA (3-10A models)
.73 mA / 1.52 mA (15-30A models)
Dual stage
Screw mounting
.25 [6.3] spade terminals,
8-32 terminal bolt & nut or
wire leads
.25 [6.3] spade terminals,
8-32 terminal bolt & nut or
wire leads
Wide band RFI suppression
for applications requiring high
attenuation levels including:
•Consumer electronics
•Single phase industrial equipment
•Inverters
•Switching power supplies
500 VAC MAX. Line to Ground
1, 6, 16, 35, 50 & 80A
.06 mA / 1.2 mA* (1 & 6A models)
1.7 mA / 3.2 mA* (16 - 50A models)
5.2 mA / 9.9 mA* (80A model)
* 1A @ 289 VAC, 16-80A @ 277 VAC 50Hz
Dual stage (6-80A models)
Dual stage + ground choke (1A only)
Screw mounting
.25 [6.3] spade terminals or
DIN type terminal block and bolt/nut
.25 [6.3] spade terminals,
wire leads or
DIN type terminal block and bolt/nut
Wide band RFI filter for small to
medium sized industrial equipment,
power converters and variable speed
motors. Provides suppression of
industrial 2-phase applications with
high RFI emissions including:
•Transportation vehicles
•Site applications
•Small construction machinery
corcom.com
Corcom Filter ProductsTE Connectivity
SERIES
PERFORMANCE
Approvals
Features
ELECTRICAL PARAMETERS
Max. voltage
Current Ratings
Leakage current each Line to Ground
@ 120VAC 60Hz / 250VAC 50Hz
Electrical Setup
Mounting features
Termination inputs
Termination outputs
MECHANICAL PARAMETERS
TYPICAL APPLICATIONS
FILTER TYPE
Q Series FC Series EP & VP Series
POWER LINE FILTERS (Continued)
Highest Performance RFI Filters for
Switching Power Supplies
•High attenuation for common and
dierential mode interference
•Eective from 10kHz to 30MHz
•Optimized for attenuation and size
•3 or 6A versions available
with IEC inlet
•Medical version available in the
HQ Series
250 VAC
3, 6 & 20A
.73 mA / 1.27 mA (3 & 20A VQ models)
.22 mA / .38 mA (3 & 20A EQ models)
.29 mA / .51 mA (6A EQ models)
Dual stage
(medical versions without y-capacitors)
Screw mounting (flange or panel)
.25 [6.3] spade terminals,
wire leads or IEC 60320-1 C14
.25 [6.3] spade terminals or
wire leads
Trouble shooter for wide banded RFI
suppression of applications with very
high RFI emissions including:
•Consumer electronics
•Single phase industrial applications
•Switching power supplies with
transient currents
•H VAC
250 VAC
6 & 10A
3.9 mA / 7.0 mA (B sux, single stage)
3.8 mA / 6.7 mA (no sux, dual stage)
Single stage (B sux)
Dual stage (no sux)
Screw mounting
DIN type terminals
DIN type terminals
Wide band RFI suppression of
industrial single phase applications
with very high RFI emissions
including:
•Drives with long motor-cables
•Variable speed motor drive
applications
* VDE approvals for dual stage models
up to 36A only
250 VAC
3, 6, 7, 10, 12 & 20A
.73 mA / 1.27 mA (VP models)
.21 mA / .36 mA (EP models)
Dual stage
Screw mounting (flange or panel)
.25 [6.3] spade terminals,
wire leads, terminal bolt & nut, or IEC
60320-1 C14
.25 [6.3] spade terminals,
wire leads, or terminal bolt & nut
Wide band attenuation for
applications with very high RFI
emissions. This filter series oers
excellent attenuation for applications
such as:
•Consumer electronics
•Single phase industrial applications
•Drive motors and controllers
UL / CSA / VDE
Single Phase Power Line Filter for
Frequency Converters
•Designed for frequency inverters
and variable speed motor drives
•Suitable for electronically noisy
environments
•Protects programmable logic
controllers from RF noise on the AC
power line
•Touch safe terminals
UL / CSA / VDE *
Dual Stage RFI Power Line Filters
for Switching Mode Power Supplies
•Dual stage filter oers high
insertion loss
•Well suited for meeting CISPR 22 A
and FCC Part 15J, Class B
•EP model meets very low leakage
current requirements
•7 and 12A versions oer optimum
package size
UL / CSA / VDE
Superior Performance
corcom.com
Corcom Filter ProductsTE Connectivity
T Series
Superior Performance
AQ Series DA, DB, DC and DCP Series
General & High Purpose
FFA, FFD, AFC, AFD Series
Superior Performance
POWER LINE FILTERS (Continued) DC FILTERS FEEDTHROUGH FILTERS
High Performance RFI Power
Line Filters for Switching Power
Supplies
•Superior common-mode and
premium dierential-mode
attenuation
•Smaller package sizes than the EP
Series
•ET models with low leakage current
•Medical versions available in the
HT Series
UL / CSA / VDE
High Frequency Power Line Filter
or Power Entry Module
•High common and dierential
mode performance from
10kHz to 1GHz
•Available with an IEC inlet,
fuseholder and switch
•Suitable for applications where
computers are used to process
secret or confidential information
UL / CSA
DC filters available in a wide variety
of versions for DC system RFI issues
•DA Series - Compact RFI Line Filter
with DC Inlet Connection
•DB Series - High Current DC Inlet
Filter and Connectors
•DC Series - General purpose line
filters for DC applications up to
125VDC with many options
•P Series - adaptable power entry
module for DC rated applications
UL / CSA / VDE
AC & DC rated feedthrough filters
and capacitors for highest rated
performance
•FFA (AC rated) & FFD ( DC rated)
feedthrough filters
•AFC (AC rated) & AFD (DC rated)
feedthrough capacitors
•Oers high reliability &
performance for high frequency
applications
•Custom versions available
250 VAC
3, 6, 10, 15 & 20A
.3 mA / .5 mA (ET models)
.75 mA / 1.2 mA (VT models)
Single (3-10A) & Dual stage (10-20A)
(medical versions without y-capacitors)
Screw mounting
.25 [6.3] spade terminals,
wire leads, terminal bolt & nut, or
IEC 60320-1 C14
.25 [6.3] spade terminals,
wire leads, or terminal bolt & nut
Wide band attenuation for
applications with very high RFI
emissions including:
•Consumer electronics
•Single phase industrial applications
•Drive motors and controllers
•Commercial & building equipment
250 VAC
3, 6, 10, 15 & 20A
1.2 mA / 2.3 mA (3A models)
.7 mA / 1.2 mA (6A models)
Multi stage
Screw mounting (flange or panel)
Wire leads
Wire leads, or IEC 60320-1 C14
Ideal filter series for hardened
applications where computers are
used to process secret or confidential
information.
125 VDC (DA, DB) & 80VDC (DC, P)
3, 6, 10 & 15A (DA Series)
60A (DB Series), 3 & 6A (P Series)
15, 30, 60, 100 & 125A (DA Series)
Screw mounting & snap-in
Spade terminals, PCB pins, wire
leads, DA or DCB connector, or
terminal bolt & nut
Spade terminals, PCB pins, wire
leads, DA or DCB connector, or
terminal bolt & nut
•Network routing equipment
•Servers
•Switching equipment
•Wireless cabinets
•Ethernet hubs
•Base stations
•Repeater stations
•Power supplies for all types of
communications equipment
250 VAC / 130 VDC
10 to 300A (FFA/AFC/DFC)
10 to 200A (FFD)
Screw mounting
Screw terminal
Screw terminal
Universal applications including;
•Servers and routers
•Base stations
•Transportation
•Telecom
•MRI rooms
•High current switch mode power
supplies
•Military and aerospace
corcom.com
Corcom Filter ProductsTE Connectivity
SERIES
PERFORMANCE
Approvals
Features
ELECTRICAL PARAMETERS
Max. voltage
Current Ratings
Leakage current each Line to Ground
Electrical Setup
Mounting features
Termination inputs
Termination outputs
MECHANICAL PARAMETERS
TYPICAL APPLICATIONS
FILTER TYPE
AYO Series AYA Series A Series
3-PHASE FILTERS
Compact Low Current 3-phase
WYE RFI Filters
•For 3-phase, four wire, WYE
applications
•Filters each of the three lines plus
neutral
•Good for attenuation beginning at
100kHz
•Space saving design
•Low leakage current
440 VAC Phase to Phase
250 VAC Phase to Neutral / Ground
3, 6, 10 & 20A
2.0 mA / 3.0 mA (3 - 10A models)
3.5 mA / 5.5 mA (20A models)
@ 120 VAC 60Hz / 250 VAC 50Hz
Single stage
Screw mounting (flange or panel)
.25 [6.3] spade terminals
.25 [6.3] spade terminals
Wide band RFI suppression for
general purpose 3-phase applications
with low to middle RFI emissions
including:
•Vending machines
•Food service equipment
•Gaming machines
•Small machine tools
440 VAC Phase to Phase
250 VAC Phase to Neutral / Ground
16, 25, 36, 50, 63 & 100A
1.62 mA / 2.82 mA
@ 120 VAC 60Hz / 250 VAC 50Hz
Single stage
Screw mounting (flange or inserts)
Terminal bolt & nut or
DIN type terminals
Terminal bolt & nut or
DIN type terminals
Universal filter series equipped with
2 dierent connecting versions
including:
•Uninterruptible power supplies
•Industrial control systems
•Machine tools
² All models except 16AYA10, 30AYA10,
63AYA6, 63AYA6A and 100AYA6A
UL / CSA / VDE
3-phase WYE RFI Power Line
Filters
•For 3-phase, four wire, WYE
applications
•Cost-eective, universal 3-phase
filters
•Good attenuation over the
complete frequency range
of 10kHz to 30MHz
•Two dierent mounting styles
available
UL Recognized²
High Performance 3-phase RFI
Filters for WYE Applications
•Common mode and dierential
mode suppression from 50kHz to
30MHz
•Optional end bell kits available to
shield input and output terminals
•AYP single stage for lower noise
environments
•AYT dual stage provides highest
performance
UL / CSA / VDE
440 VAC Phase to Phase
250 VAC Phase to Neutral / Ground
20, 30, 45 & 60A
1.4 mA / 3.4 mA
@ 120 VAC 60Hz / 250 VAC 50Hz
Single stage (AYP Models) &
Dual stage (AYT Models)
Screw mounting (inserts)
Terminal bolt & nut
Terminal bolt & nut
Wide band RFI suppression for
industrial 3-phase applications with
high noise emissions (AYP models)
and lower noise emissions (ATY
models) including:
•Large machine tools
•Customer machinery
•Input filter for motor drives
Wide Range PerformanceGeneral & High Purpose
corcom.com
Corcom Filter ProductsTE Connectivity
FCD Series AYC Series ADT Series
3-PHASE FILTERS (Continued)
Superior Performance
3-phase Delta External Power Line
Filter for Frequency Converters
•Very high attenuation & high
insertion loss
•BS models optimized for very high
insertion loss
•BS models suitable for infeed/
regenerative (ER) applications
•Touch safe terminals provide
easy connections and prevent
inadvertent contact for safety
UL Recognized
3-phase WYE RFI Power Line
Filters for High Noise Applications
•For 3-phase, four wire, WYE
applications
•Very high attenuation with low
leakage current
•Ideal for EMC troubleshooting and
refurbishing in the field
•Touch safe terminals provide
easy connections and prevent
inadvertent contact for safety
UL Recognized³
High Performance High Current
3-phase Delta RFI Filters
•Designed for very high insertion
loss for Delta three phase, three
wire applications
•Available with common or
dierential mode coils
UL Recognized
480 VAC Phase to Phase
277 VAC Phase to Neutral / Ground
6 to 230A
Varies from .26 mA/V for 6A model
to 3.25 mA/V for FCD10BS models
refer to catalog or website for full ratings
voltage drop to virtual N to PE/V
Single stage (B sux models) &
Dual stage (blank sux models)
Screw mounting (flange)
DIN type terminals
DIN type terminals
Wide band RFI suppression for
industrial 3-phase applications with
very high RFI emissions including:
•Machine tools
•Elevators & escalators
•Frequency converters
•Industrial cabinets
480 VAC Phase to Phase
277 VAC Phase to Neutral / Ground
16 to 200A
Varies from 62 / 106 mA/V for 16A
to 111 / 192 mA/V for 200A model
refer to catalog or website for full ratings
@ 120 VAC 60Hz / 277 VAC 50Hz
Single stage
Screw mounting (flange)
DIN type terminals
DIN type terminals
Wide band RFI suppression for WYE
applications with very high
RFI emissions including:
•Frequency converters with very
long motor cables
•Machine tools
² All models except 200AYC10B
480 VAC Phase to Phase
277 VAC Phase to Neutral / Ground
63, 100, 160 & 200A
1.3A (ADT6)
2.6A (63ADT6S)
4.6A (100, 160, 200ADT6S)
@ 277VAC 60Hz
Single stage
with feedthrough capacitors
Screw mounting (flange)
Terminal bolt & nut
Terminal bolt & nut
Ideal for industrial 3-phase
applications with extremely high
noise emissions including;
•High current motor drives
•Spot-welding machines
•Any dicult application with very
dicult noise suppression
BCF Series
Compact 3-phase Delta RFI Filters
for Universal Applications
•Compact, light weight book-form
design
•Insulated, high quality safety
terminals for input and output
•Good common and dierential
mode performance below 100kHz
•Touch safe terminals provide
easy connections and prevent
inadvertent contact for safety
UL & VDE
480 VAC Phase to Phase
277 VAC Phase to Neutral / Ground
7 to 130A
30 mA
@ 277 VAC 50Hz
Single stage
Screw mounting (flange)
DIN type terminals
DIN type terminals
Specially suited for regeneration
systems of returning power. Wide
banded RFI suppression for industrial
3-phase applications with very high
RFI emissions including:
•3-phase inverters & converters
•Variable speed motor drives
•Process automation equipment
•Elevators & escalators
•Machine tools
corcom.com
Corcom Filter ProductsTE Connectivity
SERIES
PERFORMANCE
Approvals
Features
ELECTRICAL PARAMETERS
Max. voltage
Current Ratings
Leakage current each Line to Ground
@ 120VAC 60Hz / 250VAC 50Hz
Electrical Setup
Mounting features
Termination inputs
Termination outputs
MECHANICAL PARAMETERS
TYPICAL APPLICATIONS
FILTER TYPE
SRB Series EEJ Series C Series
POWER ENTRY MODULES
General Purpose
250 VAC
15A*
Varies by model from .2 µA to .24mA
refer to catalog or website for full ratings
Capacitive, 8 options available
values from 33pF to 3300pF
Screw and snap-in mounting
IEC 60320-1 C14
.25 [6.3] spade terminals,
wire leads or PC board pins
250 VAC
1 to 20A
EEJ/EJS Models: .22 mA / .38 mA
EJH Models: 2 µA / 5 µA
EJM Models: .01 mA / .017 mA
Single stage
Screw and snap-in mounting
IEC 60320-1 C14 or C20
.25 [6.3] spade terminals,
wire leads or PC board pins
Wide band RFI suppression for a
wide range of applications including:
•TV / Audio / Video
•Computing & accessories
•Home appliances
•Medical equipment
•Gaming machines
•Exercise equipment
•Appliances
Minimum Depth, Cost-eective
Shielded Power Inlet Filter
•Wide range of capacitor values
•Attenuates coupled EMI up to
300MHz
•Minimal to low leakage current
versions are suitable for patient
and non-patient contact medical
equipment.
•Full range of mounting and
termination options including
unique vertical and horizontal
orientation slide in mounts
eliminate the need for mounting
hardware
UL / CSA / VDE*
Cost-eective Medium
Performance Power Inlet Filter
Including the EJH/EJHS, EJM/EJMS
and EJS Models
•Enhanced two element circuit
provides medium attenuation to
30MHz
•EJH & EJHS models feature minimal
leakage current suitable for patient
contact medical applications
•EJM & EJMS models feature low
leakage current, suitable for most
medical applications
•EJS models feature EEJ
performance in snap-in mounting
UL / CSA / VDE
Power Entry Module with Switch
•Two function power entry module
combining a DPST switch and an
IEC 60320-1 inlet
•Snap–in or flange mounting
•Available with or without a shielded
general purpose or medical grade
filter
•Two element circuit provides
enhanced EMI attenuation
•Reduce OEM wiring time with
optional pre–connected line and
switch terminals
250 VAC
1, 3, 6, 10 or 15A*
F models: .25 mA / .40 mA
H & non-filtered models: 2 µA / 5 µA
Single stage & unfiltered
Screw and snap-in mounting
IEC 60320-1 C14
.187 [4.8] spade terminals (non-filtered)
or .25 [6.3] spade terminals (Filtered)
Available with or without
pre-connected switch terminals
UL / CSA / VDE*
Wide band RFI suppression for any
application with very limited space
for the suppression unit including:
•TV / Audio / Video
•Computing & accessories
•Home appliances
•Consumer electronics
*15A versions are tested by UL to US and
Canadian requirements and
are VDE approved at 10A
Wide band RFI suppression for
applications with limited space
including:
•TV / Audio / Video
•Computing & PC powers supplies
•Network & cabeling systems
•Medical equipment
*15A versions are tested by UL to US and
Canadian requirements and
are VDE approved at 10A
Wide Range Performance
corcom.com
Corcom Filter ProductsTE Connectivity
CU Series P Series EJT Series
POWER ENTRY MODULES (Continued)
General Purpose
250 VAC
1, 3, 6, 10 or 15A*
Filtered models: .25 mA / .40 mA
Non-filtered models: 2 µA / 5 µA
Single stage & unfiltered
Screw and snap-in mounting
IEC 60320-1 C14
.187 [4.8] spade terminals
Available with or without
pre-connected switch terminals
Specially designed for 1U height
equipment racks and can be used in
space limited applications including:
•Telecom
•Computing
•TV / Audio / Video
•Consumer electronics
*15A versions are tested by UL to US and
Canadian requirements and
are VDE approved at 10A
Superior Performance
250 VAC
3, 6 & 10A Filtered, 10A non-filtered
H & L Models: 2 µA / 5 µA
S & Z Models: .25 mA / .50 mA
Single stage
Screw and snap-in mounting
IEC 60320-1 C14
.187 [4.8] spade terminals (standard)
or .25 [6.3] spade terminals (L & Z)
Available with or without
interconnection block for unfiltered
versions
Wide band RFI suppression in over
8000 configurations for a wide range
of applications including:
•TV / Audio / Video
•Computing & accessories
•Home appliances
•Medical equipment
•Gaming equipment
•Fitness equipment
•H VAC
Compact 1U Height Switched Power
Entry Module
•Designed for popular 1U (1 ¾”)
height rack mounted equipment
•Two function power entry module
combining a SPST switch and an
IEC 60320-1 inlet
•Snap–in, flange and flush mounting
•Reduce OEM wiring time with
optional pre–connected line and
switch terminals
UL / CSA / VDE*
Versatile Power Entry Module with
Small Footprint
•Snap-in or flange mounting
•Standard IEC 60321-1 C14 power
inlet
•Both North American and metric
fusing capabilities
•Two voltage selection options
•Optional DPST on/o switch
•Filter options for general purpose,
medical and high-performance EMI
filtering
UL / CSA / VDE
250 VAC
1, 3, 6, 10 or 15A
.21 mA / .36 mA
Dual stage
Screw and snap-in mounting
IEC 60320-1 C14 or C20
.25 [6.3] spade terminals or
wire leads
Specially designer to attenuate noise
in the high frequency range up to
1GHz for various electronic
applications including:
•Plasma & LCD TV’s
•Computing & accessories
•Instrumentation & measurement
*15A versions are tested by UL to US and
Canadian requirements and
are VDE approved at 10A
High Performance Power Inlet Filter
•Superior EMI filter with IEC 60320-1
inlet
•Double three element dierential
mode circuit attenuates noise up
to 1GHz
•Up to 15A with IEC 60320-1 C14
•20A rating with IEC 60320-1 C20
•Spade terminals or wire leads
UL / CSA / VDE*
GG & HG Series
250 VAC
1, 3, 6 & 10A
HG Models: 2 µA / 5 µA
GG Models: .25 mA / .42 mA
Single stage
(medical versions without y-capacitors)
Screw and snap-in mounting
IEC 60320-1 C14
.25 [6.3] spade terminals or
wire leads
Wide band RFI suppression for
applications with very limited space
including:
•TV / Audio / Video
•Computing & accessories
•Home appliances
•Medical equipment
•Gaming equipment
•Fitness equipment
Smallest Power Entry Module with
Metric Fuse Holders
•Single or dual fusing
•Two element circuit provides basic
attenuation
•Available with an internal ground-
circuit inductor (C versions)
to isolate equipment chassis
from power line ground at radio
frequencies
•Multiple termination and mounting
styles
•Medical version as the HG Series
identical to GG with dual fuse only
UL / CSA / VDE
te.com
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. All Rights Reserved.
1-1654250-1 CIS JG 08/2011
Corcom, TE Connectivity and the TE connectivity (logo) are trademarks. Other logos,
product and/or company names might be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this yer, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information
contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any
implied warranties of merchantability or tness for a particular purpose. The dimensions in this yer are for reference purposes only and are subject to change without notice.
Specications are subject to change without notice. Consult TE for the latest dimensions and design specications.
FOR MORE INFORMATION
corcom.com
TE Technical Support Center
Internet: te.com/help
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TE Connectivity:
36AYA6 ARY