11
1) DIN EN 60664-1 ^
= VDE 0110-1 ^
= IEC 60664-1
2) All contacts under load
eco
|
matem Standard | Technical Data
General Characteristics Standard Characteristics
Number of contacts 3 + PE 6 + PE
Termination technique screw type solder type crimp type
Wire gauge / AWG 0.75 - 2.5 mm2
AWG 18-14
max. 0.75mm
2
AWG 18
0.14 - 1.5 mm
2
AWG 26 - 16
Flammability UL 94 VO
Locking system round thread
View on termination side
of male contact insert
Electrical Characteristics
Rated voltage IEC 60664-1 1) 400 V 250 V
Pollution degree IEC 60664-1 1) 3
Installation category IEC 60664-1 1) III
Insulation group IEC 60664-1 1) II
Rated impulse withstand voltage
IEC 60664-1 1) 6000 V 4000 V
Current rating IEC 60512-5-2 16 A / + 55°C 12 A /
+ 55°C
13 A /
+ 55°C
Contact resistance IEC 60512-2-1 ≤ 5 m Ω
Insulation resistance IEC 60512-3-1 ≥ 108 Ω
Climatic Characteristics
Climatic category IEC 60068-1 40 / 100 /56 40 / 125 / 56
Operating temperature -40°C ... +100°C -40°C ... +125°C
Mechanical Characteristics
IP-degree IEC 60529 IP 65 / IP 67
Insertion and withdrawal forces IEC 60512-13-2 ≤ 15 N ≤ 30 N
Mechanical operation IEC 60512-9-1 ≥ 500 mating cycles
Materials
Housing material PA 6.6 / PA 6
Dielectric material PA 6.6 / PA 6
Gasket material Neopren
Material lace for protective cover TPE
Contact plating silver plating / gold plating
Derating-Curves 2)
3 + PE 6 + PE
Strombelastbarkeit
Umgebungstemperatur (°C)
0 20 40 60 80 100 120 140
30
25
20
15
10
5
0
a
b
Umgebungstemperatur (°C)
0 20 40 60 80 100 120 140
30
25
20
15
10
5
0
Strombelastbarkeit
a
b
Curve
Wire gauge
a1.5 mm
2
b2.5 mm
2
Curve
Wire gauge
a0.75 mm2
stamped
solder contacts
b1.5 mm2
stamped
crimp contacts
Remark
The stated technical values refer to the use as connector without breaking capacity (COC). If these components are used as plug and socket
device a reduced current carrying capacity has to be considered.
The characteristics have to be requested from the manufacturer.
Current carrying capacity
Current carrying capacity
Ambient temperature Ambient temperature
