92GU45,45A NPN POWER DARLINGTON {-2N6724,2> TRANSISTORS 2s, WATTS Features: conor e Lamp driver e Digit driver eMnTTER Base 2) Directly compatible with bipolar and MOS I/C drive cue EMITTER CASE STYLE TO-237 DIMENSIONS ARE IN INCHES AND (MILLIMETERS) .215(5.46) -160(4.06) i . d ween 3105(2.67)_ .085(2.41)} .280(7.41) J Fr '260(6.60) nis 33) osot27) 170(4.32) / IT] SEATING .250(6.35) F PLANE 0191.48) or[ 018.48) a. ore. ] o16(.41) (016(.41) _.074(.38) ep OD cette, orf coase) 2250 ] O16(.41) 016.41) .014(.36) ies ot 41) TS Be ken rae a e- ep =e ean a ! TYPE TERM.1 | TEAM.2 TERM.3 TAB 10-237 | EMITTER | BASE COLLECTOR } COLLECTOR maximum ratings (T, = 25C) (unless otherwise specified) RATING SYMBOL 92GU45/2N6724_ | 92GU45A/2N6725 UNITS Collector-Emitter Voltage VcEO 40 50 - Volts Collector-Emitter Voltage VcEs 50 60 Volts Emitter Base Voltage VEBO 12 12 Voits Collector Current Continuous Io 2.0 2.0 A Total Power Dissipation @ Ta = 25C Ppp* 1.0 1.0 Watts Operating and Storage Junction Temperature Range Ty, Tsta ~55 to +150 -55 to +150 C thermal characteristics Thermal Resistance, Junction to Ambient Ra 200 200 C/W Thermal Resistance, Junction to Case ReJc 62.5 62.5 C/W * Pop = Practical Power Dissipation, i.e., that power which can be dissipated with the device installed in a typical manner on a printed circuit board with total copper run area equal to 1.0 in.? minimum. 833electrical characteristics (Tc = 25C) (unless otherwise specified) } CHARACTERISTIC | SYMBOL | MIN | TYP MAX | UNIT off characteristics Collector-Emitter Breakdown Voltage 92GU45,2N6724 BVCES 40 _ _ Volts (Ig = 1.0mA, Vee = OV) 92GU45A,2N6725 50 Collector Cutoff Current IcBO (Vo = 30V, Ie = 0A) 92GU45,2N6724 _ 100 nA (Vop = 40V, Ie = 0A) 92GU45A,2N6725 Emitter Cutoff Current _ _ (Vep = 10V, Ic = 0) |EBO 100 HA on characteristics DC Current Gain hFe 25,000 _ _ (I = 1mA, Vog = 5V) (Io = 500mA, Vee = 5V) 15,000 _ _ _ (Io = 1000mA, Voce = 5V) 4,000 _ _ Collector-Emitter Saturation Voltage (Ig = 1000mA, Ip = 2mA) VcE(sat) _ _ (Io = 200mA, Ig = 2mA) _ _ =a oOo [ou Base-Emitter Saturation Voltage V _ _ (Ic = 1000mA, Vog = 2mA) BE(sat) np Volts Base-Emitter On Voltage (I = 1000mA, Voce = 5V) VBE(on) - 2.0 Volts 834