RoHS SMD SHIELDED POWER CHIP INDUCTOR Dimensions: Inches (mm) .177 Max (4.2 Max) .315.008 (8.00.2) .083 (2.1) XXX .315.008 (8.00.2) PCSV80 .083 (2.1) .248 Typ. (6.3 Typ.) Allied Part Number PCSV80-R90M-RC PCSV80-1R4M-RC PCSV80-2R0M-RC PCSV80-3R3M-RC PCSV80-4R7M-RC PCSV80-6R8M-RC PCSV80-100M-RC PCSV80-150M-RC PCSV80-220M-RC PCSV80-330M-RC PCSV80-470M-RC PCSV80-680M-RC PCSV80-101M-RC Inductance Tolerance (h) (%) 0.9 1.4 2.0 3.3 4.7 6.8 10 15 22 33 47 68 100 Features Test Freq. KHz, 1V RDC (m) 30% Isat (mA) Typ. Irms (mA) Typ. Marking 100 100 100 100 100 100 100 100 100 100 100 100 100 7 9 11 15 18 25 38 50 80 110 160 240 340 13.8 10.8 9.6 7.5 6 5.4 4.3 3.6 2.8 2.3 1.9 1.7 1.4 8.05 7.80 7.40 6 5.5 5.1 3.8 3.2 2.6 2 1.75 1.45 1.1 R90 1R4 2R0 3R3 4R7 6R8 100 150 220 330 470 680 101 20 20 20 20 20 20 20 20 20 20 20 20 20 All specifications subject to change without notice. * Magnetically Shielded Construction * Low Profile Electrical Inductance Range: 0.9h ~ 100h (other values being added) Tolerance: Available in 20% & 30% Operating Temp: -25C ~ +105C Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of T = 40C typical. Resistance to Soldering Heat Pre-Heat 150C, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260C +/- 5C for 10 sec Test Equipment (L): HP4284A (RDC): Chroma MilliOhm Meter Mode 16502 Current: HP4284A + HP42841A Physical Packaging: 1K per Tape and reel Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1507/13/12 www.alliedcomponents.com