www.fairchildsemi.com MC78XXE/LM78XXE/MC78XXAE 3-Terminal 1A Positive Voltage Regulator Features Description * * * * * The MC78XXE/LM78XXE/MC78XXAE series of three terminal positive regulators are available in the TO-220/D-PAK package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents. Output Current up to 1A Output Voltages of 5, 6, 8, 9, 12, 15, 18, 24V Thermal Overload Protection Short Circuit Protection Output Transistor Safe Operating Area Protection TO-220 GND 1 D-PAK GND 1 1. Input 2. GND 3. Output Internal Block Digram INPUT SERIES PASS ELEMENT 1 CURRENT GENERATOR STARTING CIRCUIT REFERENCE VOLTAGE OUTPUT 3 SOA PROTECTION ERROR AMPLIFIER THERMAL PROTECTION GND 2 Rev. 1.0.0 (c)2003 Fairchild Semiconductor Corporation MC78XXE/LM78XXE/MC78XXAE Absolute Maximum Ratings Parameter Symbol Value Unit VI VI 35 40 V V Input Voltage (for VO = 5V to 18V) (for VO = 24V) Thermal Resistance Junction-Cases (TO-220) RJC 5 C/W Thermal Resistance Junction-Air (TO-220) RJA 65 C/W Operating Temperature Range TOPR 0 ~ +125 C Storage Temperature Range TSTG -65 ~ +150 C Electrical Characteristics (MC7805E/LM7805E) (Refer to test circuit ,0C < TJ < 125C, IO = 500mA, VI = 10V, CI= 0.33F, CO= 0.1F, unless otherwise specified) Parameter Output Voltage Line Regulation (Note1) Load Regulation (Note1) Quiescent Current Symbol VO Regline Conditions Typ. Max. TJ = +25C 4.8 5.0 5.2 5.0mA Io 1.0A, PO 15W VI = 7V to 20V 4.75 5.0 5.25 VO = 7V to 25V - 4.0 100 VI = 8V to 12V - 1.6 50 IO = 5.0mA to1.5A - 9 100 IO =250mA to 750mA - 4 50 - 5.0 8.0 IO = 5mA to 1.0A - 0.03 0.5 VI = 7V to 25V - 0.3 1.3 IO = 5mA - -0.8 - mV/C - 42 - V/Vo 62 73 - dB IO = 1A, TJ =+25C - 2 - V TJ = +25C TJ = +25C IQ TJ = +25C IQ Output Voltage Drift (Note2) VO/T Output Noise Voltage VN f = 10Hz to 100kHz, TA = +25C Ripple Rejection (Note2) RR f = 120Hz VO = 8V to 18V Dropout Voltage VDrop Unit Min. Regload Quiescent Current Change MC7805E/LM7805E V mV mV mA mA Output Resistance (Note2) rO f = 1kHz - 15 - m Short Circuit Current ISC VI = 35V, TA =+25C - 230 - mA Peak Current (Note2) IPK TJ = +25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Changes in Vo due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 2 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7806E) (Continued) (Refer to test circuit ,0C < TJ < 125C, IO = 500mA, VI =11V, CI= 0.33F, CO= 0.1F, unless otherwise specified) Parameter Output Voltage Symbol VO Conditions MC7806E Min. Typ. Max. TJ = +25C 5.75 6.0 6.25 5.0mA IO 1.0A, PO 15W VI = 8.0V to 21V 5.7 6.0 6.3 VI = 8V to 25V - 5 120 VI = 9V to 13V - 1.5 60 IO =5mA to 1.5A - 9 120 IO =250mA to750A - 3 60 Unit V Line Regulation (Note1) Regline TJ =+25C Load Regulation (Note1) Regload TJ =+25C IQ TJ =+25C - 5.0 8.0 IO = 5mA to 1A - - 0.5 VI = 8V to 25V - - 1.3 IO = 5mA - -0.8 - mV/C - 45 - V/Vo 59 75 - dB IO = 1A, TJ = +25C - 2 - V Quiescent Current Quiescent Current Change IQ Output Voltage Drift (Note2) VO/T Output Noise Voltage VN f = 10Hz to 100kHz, TA = +25C Ripple Rejection (Note2) RR f = 120Hz VI = 9V to 19V Dropout Voltage VDrop mV mV mA mA Output Resistance (Note2) rO f = 1kHz - 19 - m Short Circuit Current ISC VI = 35V, TA= +25C - 250 - mA Peak Current (Note2) IPK TJ =+25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 3 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7808E) (Continued) (Refer to test circuit ,0C < TJ < 125C, IO = 500mA, VI =14V, CI= 0.33F, CO= 0.1F, unless otherwise specified) Parameter Output Voltage Symbol VO Conditions MC7808E Min. Typ. Max. TJ =+25C 7.7 8.0 8.3 5.0mA IO 1.0A, PO 15W VI = 10.5V to 23V 7.6 8.0 8.4 VI = 10.5V to 25V - 5.0 160 VI = 11.5V to 17V - 2.0 80 IO = 5.0mA to 1.5A - 10 160 IO= 250mA to 750mA - 5.0 80 Unit V Line Regulation (Note1) Regline TJ =+25C Load Regulation (Note1) Regload TJ =+25C IQ TJ =+25C - 5.0 8.0 IO = 5mA to 1.0A - 0.05 0.5 VI = 10.5A to 25V - 0.5 1.0 IO = 5mA - -0.8 - mV/C VN f = 10Hz to 100kHz, TA = +25C - 52 - V/Vo RR f = 120Hz, VI = 11.5V to 21.5V Quiescent Current Quiescent Current Change IQ Output Voltage Drift (Note2) VO/T Output Noise Voltage Ripple Rejection (Note2) Dropout Voltage VDrop mV mV mA mA 56 73 - dB IO = 1A, TJ = +25C - 2 - V Output Resistance (Note2) rO f = 1kHz - 17 - m Short Circuit Current ISC VI = 35V, TA = +25C - 230 - mA Peak Current (Note2) IPK TJ =+25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 4 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7809E) (Continued) (Refer to test circuit ,0C < TJ < 125C, IO = 500mA, VI =15V, CI= 0.33F, CO= 0.1F, unless otherwise specified) Parameter Output Voltage Symbol VO Conditions MC7809E Min. Typ. Max. TJ = +25C 8.65 9 9.35 5.0mA IO 1.0A, PO 15W VI = 11.5V to 24V 8.6 9 9.4 VI = 11.5V to 25V - 6 180 VI = 12V to 17V - 2 90 IO = 5mA to 1.5A - 12 180 IO = 250mA to 750mA - 4 90 Unit V Line Regulation (Note1) Regline TJ = +25C Load Regulation (Note1) Regload TJ = +25C IQ TJ = +25C - 5.0 8.0 IO = 5mA to 1.0A - - 0.5 VI = 11.5V to 26V - - 1.3 Output Voltage Drift (Note2) VO/T IO = 5mA - -1 - mV/C Output Noise Voltage VN f = 10Hz to 100kHz, TA = +25C - 58 - V/Vo Ripple Rejection (Note2) RR f = 120Hz VI = 13V to 23V 56 71 - dB IO = 1A, TJ = +25C - 2 - V Quiescent Current Quiescent Current Change Dropout Voltage IQ VDrop mV mV mA mA Output Resistance (Note2) rO f = 1kHz - 17 - m Short Circuit Current ISC VI = 35V, TA = +25C - 250 - mA Peak Current (Note2) IPK TJ = +25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 5 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7812E) (Continued) (Refer to test circuit ,0C < TJ < 125C, IO = 500mA, VI =19V, CI= 0.33F, CO=0.1F, unless otherwise specified) Parameter Output Voltage Symbol VO Conditions MC7812E Min. Typ. Max. TJ = +25C 11.5 12 12.5 5.0mA IO 1.0A, PO 15W VI = 14.5V to 27V 11.4 12 12.6 VI = 14.5V to 30V - 10 240 VI = 16V to 22V - 3.0 120 IO = 5mA to 1.5A - 11 240 IO = 250mA to 750mA - 5.0 120 Unit V Line Regulation (Note1) Regline TJ = +25C Load Regulation (Note1) Regload TJ = +25C IQ TJ = +25C - 5.1 8.0 IO = 5mA to 1.0A - 0.1 0.5 VI = 14.5V to 30V - 0.5 1.0 IO = 5mA - -1 - mV/C - 76 - V/Vo 55 71 - dB IO = 1A, TJ = +25C - 2 - V Quiescent Current Quiescent Current Change IQ Output Voltage Drift (Note2) VO/T Output Noise Voltage VN f = 10Hz to 100kHz, TA = +25C Ripple Rejection (Note2) RR f = 120Hz VI = 15V to 25V Dropout Voltage VDrop mV mV mA mA Output Resistance (Note2) rO f = 1kHz - 18 - m Short Circuit Current ISC VI = 35V, TA= +25C - 230 - mA Peak Current (Note2) IPK TJ = +25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 6 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7815E) (Continued) (Refer to test circuit ,0C < TJ < 125C, IO = 500mA, VI =23V, CI= 0.33F, CO=0.1F, unless otherwise specified) Parameter Output Voltage Symbol VO Conditions MC7815E Min. Typ. Max. TJ =+25C 14.4 15 15.6 5.0mA IO 1.0A, PO 15W VI = 17.5V to 30V 14.25 15 15.75 VI = 17.5V to 30V - 11 300 VI = 20V to 26V - 3 150 IO = 5mA to 1.5A - 12 300 IO = 250mA to 750mA - 4 150 Unit V Line Regulation (Note1) Regline TJ = +25C Load Regulation (Note1) Regload TJ = +25C IQ TJ =+25C - 5.2 8.0 IO = 5mA to 1.0A - - 0.5 VI = 17.5V to 30V - - 1.0 IO = 5mA - -1 - mV/C VN f = 10Hz to 100kHz, TA = +25C - 90 - V/Vo RR f = 120Hz VI = 18.5V to 28.5V 54 70 - dB VDrop IO = 1A, TJ=+25C - 2 - V Quiescent Current Quiescent Current Change IQ Output Voltage Drift (Note2) VO/T Output Noise Voltage Ripple Rejection (Note2) Dropout Voltage mV mV mA mA Output Resistance (Note2) rO f = 1kHz - 19 - m Short Circuit Current ISC VI = 35V, TA = +25C - 250 - mA Peak Current (Note2) IPK TJ =+25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 7 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7818E) (Continued) (Refer to test circuit ,0C < TJ < 125C, IO = 500mA, VI = 27V, CI = 0.33F, CO= 0.1F, unless otherwise specified) Parameter Symbol Conditions MC7818E Min. Typ. Max. Unit TJ =+25C 17.3 18 18.7 5.0mA IO 1.0A, PO 15W VI = 21V to 33V 17.1 18 18.9 VI = 21V to 33V - 15 360 VI = 24V to 30V - 5 180 IO = 5mA to 1.5A - 15 360 IO = 250mA to 750mA - 5.0 180 TJ = +25C - 5.2 8.0 IO = 5mA to 1.0A - - 0.5 VI = 21V to 33V - - 1 Output Voltage Drift (Note2) VO/T IO = 5mA - -1 - mV/C Output Noise Voltage VN f = 10Hz to 100kHz, TA = +25C - 110 - V/Vo Ripple Rejection (Note2) RR f = 120Hz VI = 22V to 32V 53 69 - dB IO = 1A, TJ = +25C - 2 - V Output Voltage VO TJ =+25C Line Regulation (Note1) Regline Load Regulation (Note1) Regload TJ =+25C Quiescent Current Quiescent Current Change Dropout Voltage IQ IQ VDrop V mV mV mA mA Output Resistance (Note2) rO f = 1kHz - 22 - m Short Circuit Current ISC VI = 35V, TA = +25C - 250 - mA Peak Current (Note2) IPK TJ = +25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 8 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7824E) (Continued) (Refer to test circuit ,0C < TJ < 125C, IO = 500mA, VI =33V, CI= 0.33F, CO=0.1F, unless otherwise specified) Parameter Symbol Conditions TJ = +25C Output Voltage VO TJ = +25C Regline Load Regulation (Note1) Regload TJ = +25C Quiescent Current IQ Quiescent Current Change IQ Output Voltage Drift (Note2) VO/T 25 22.8 24 25.25 VI = 27V to 38V - 17 480 VI = 30V to 36V - 6 240 IO = 5mA to 1.5A - 15 480 IO = 250mA to 750mA - 5.0 240 Unit V mV mV TJ = +25C - 5.2 8.0 IO = 5mA to 1.0A - 0.1 0.5 VI = 27V to 38V - 0.5 1 IO = 5mA - -1.5 - mV/C - 60 - V/Vo 50 67 - dB IO = 1A, TJ= +25C - 2 - V VN f = 10Hz to 100kHz, TA = +25C Ripple Rejection (Note2) RR f = 120Hz VI = 28V to 38V VDrop Typ. Max. 24 Output Noise Voltage Dropout Voltage Min. 23 5.0mA IO 1.0A, PO 15W VI = 27V to 38V Line Regulation (Note1) MC7824E mA mA Output Resistance (Note2) rO f = 1kHz - 28 - m Short Circuit Current ISC VI = 35V, TA= +25C - 230 - mA Peak Current (Note2) IPK TJ = +25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 9 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7805AE) (Continued) (Refer to the test circuits. 0C < TJ < 125C, Io =1A, V I = 10V, C I=0.33F, C O=0.1F, unless otherwise specified) Parameter Output Voltage Line Regulation (Note1) Symbol VO Regline Conditions Min. Typ. Max. TJ = +25C 4.9 5 5.1 IO = 5mA to 1A, PO 15W VI = 7.5V to 20V 4.8 5 5.2 VI = 7.5V to 25V, IO = 500mA - 5 50 VI = 8V to 12V - 3 50 VI= 7.3V to 20V - 5 50 VI= 8V to 12V - 1.5 25 TJ = +25C, IO = 5mA to 1.5A - 9 100 TJ = +25C Load Regulation (Note1) Quiescent Current Regload IQ Quiescent Current Change IQ Output Voltage Drift (Note2) V/T Unit V mV IO = 5mA to 1A - 9 100 IO = 250mA to 750mA - 4 50 mV TJ = +25C - 5.0 6 IO = 5mA to 1A - - 0.5 VI = 8 V to 25V, IO = 500mA - - 0.8 VI = 7.5V to 20V, TJ = +25C - - 0.8 Io = 5mA - -0.8 - mV/C mA mA Output Noise Voltage VN f = 10Hz to 100kHz TA =+25C - 10 - V/Vo Ripple Rejection (Note2) RR f = 120Hz, IO = 500mA VI = 8V to 18V - 68 - dB IO = 1A, TJ =+25C - 2 - V Dropout Voltage VDrop Output Resistance (Note2) rO f = 1kHz - 17 - m Short Circuit Current ISC VI = 35V, TA =+25C - 250 - mA Peak Current (Note2) IPK TJ = +25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 10 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7806AE) (Continued) (Refer to the test circuits. 0C < TJ < 125C, Io =1A, V I =11V, C I=0.33F, C O=0.1F, unless otherwise specified) Parameter Output Voltage Line Regulation (Note1) Symbol VO Regline Conditions Min. Typ. Max. TJ =+25C 5.58 6 6.12 IO = 5mA to 1A, PO 15W VI = 8.6V to 21V 5.76 6 6.24 VI = 8.6V to 25V, IO = 500mA - 5 60 VI = 9V to 13V - 3 60 VI = 8.3V to 21V - 5 60 VI = 9V to 13V - 1.5 30 - 9 100 TJ =+25C Load Regulation (Note1) Quiescent Current TJ =+25C, IO = 5mA to 1.5A Regload IQ Quiescent Current Change IQ Output Voltage Drift (Note2) V/T IO = 5mA to 1A - 4 100 IO = 250mA to 750mA - 5.0 50 TJ =+25C - 4.3 6 IO = 5mA to 1A - - 0.5 VI = 9V to 25V, IO = 500mA - - 0.8 Unit V mV mV mA mA VI = 8.5V to 21V, TJ = +25C - - 0.8 IO = 5mA - -0.8 - mV/C Output Noise Voltage VN f = 10Hz to 100kHz TA = +25C - 10 - V/Vo Ripple Rejection (Note2) RR f = 120Hz, IO = 500mA VI = 9V to 19V - 65 - dB IO = 1A, TJ = +25C - 2 - V Dropout Voltage VDrop Output Resistance (Note2) rO f = 1kHz - 17 - m Short Circuit Current ISC VI = 35V, TA =+25C - 250 - mA Peak Current (Note2) IPK TJ = +25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 11 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7808AE) (Continued) (Refer to the test circuits. 0C < TJ < 125C, Io =1A, V I = 14V, C I=0.33F, C O=0.1F, unless otherwise specified) Parameter Output Voltage Line Regulation (Note1) Symbol VO Regline Conditions Min. Typ. Max. TJ =+25C 7.84 8 8.16 IO = 5mA to 1A, PO 15W VI = 10.6V to 23V 7.7 8 8.3 VI= 10.6V to 25V, IO = 500mA - 6 80 VI= 11V to 17V - 3 80 VI= 10.4V to 23V - 6 80 VI= 11V to 17V TJ =+25C Load Regulation (Note1) Quiescent Current Quiescent Current Change Output Voltage Drift (Note2) Regload IQ IQ V/T Unit V mV - 2 40 TJ =+25C, IO = 5mA to 1.5A - 12 100 IO = 5mA to 1A - 12 100 IO = 250mA to 750mA - 5 50 TJ =+25C - 5.0 6 IO = 5mA to 1A - - 0.5 VI = 11V to 25V, IO = 500mA - - 0.8 VI= 10.6V to 23V, TJ =+25C - - 0.8 IO = 5mA - -0.8 - mV/C mV mA mA Output Noise Voltage VN f = 10Hz to 100kHz TA =+25C - 10 - V/Vo Ripple Rejection (Note2) RR f = 120Hz, IO = 500mA VI = 11.5V to 21.5V - 62 - dB IO = 1A, TJ =+25C - 2 - V Dropout Voltage VDrop Output Resistance (Note2) rO f = 1kHz - 18 - m Short Circuit Current ISC VI = 35V, TA =+25C - 250 - mA Peak Current (Note2) IPK TJ = +25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 12 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7809AE) (Continued) (Refer to the test circuits. 0C < TJ < 125C, Io =1A, V I = 15V, C I=0.33F, C O=0.1F, unless otherwise specified) Parameter Output Voltage Line Regulation (Note1) Symbol VO Regline Conditions Min. Typ. Max. TJ = +25C 8.82 9.0 9.18 IO = 5mA to 1A, PO 15W VI = 11.2V to 24V 8.65 9.0 9.35 VI = 11.7V to 25V, IO = 500mA - 6 90 VI= 12.5V to 19V - 4 45 VI = 11.5V to 24V - 6 90 VI = 12.5V to 19V - 2 45 - 12 100 IO = 5mA to 1.0A - 12 100 IO = 250mA to 750mA - 5 50 TJ = +25C - 5.0 6.0 VI = 11.7V to 25V, TJ = +25C - - 0.8 VI = 12V to 25V, IO = 500mA - - 0.8 TJ =+25C Load Regulation (Note1) Quiescent Current TJ =+25C, IO = 5mA to 1.0A Regload IQ Quiescent Current Change IQ Output Voltage Drift (Note2) V/T Unit V mV mV mA mA IO = 5mA to 1.0A - - 0.5 IO = 5mA - -1.0 - mV/C Output Noise Voltage VN f = 10Hz to 100kHz TA = +25C - 10 - V/Vo Ripple Rejection (Note2) RR f = 120Hz, IO = 500mA VI = 12V to 22V - 62 - dB IO = 1A, TJ =+25C - 2.0 - V Dropout Voltage VDrop Output Resistance (Note2) rO f = 1kHz - 17 - m Short Circuit Current ISC VI = 35V, TA = +25C - 250 - mA Peak Current (Note2) IPK TJ = +25C - 2.2 - A Note: 1. Load and line regulation are specified at constant, junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 13 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7812AE) (Continued) (Refer to the test circuits. 0C < TJ < 125C, Io =1A, V I = 19V, C I=0.33F, CO=0.1F, unless otherwise specified) Parameter Output Voltage Line Regulation (Note1) Symbol VO Regline Conditions Min. Typ. Max. TJ =+25C 11.75 12 12.25 IO = 5mA to 1A, PO 15W VI = 14.8V to 27V 11.5 12 12.5 VI= 14.8V to 30V, IO = 500mA - 10 120 VI= 16V to 22V - 4 120 VI= 14.5V to 27V - 10 120 VI= 16V to 22V - 3 60 - 12 100 TJ =+25C Load Regulation (Note1) Quiescent Current TJ =+25C, IO = 5mA to 1.5A Regload IQ Quiescent Current Change IQ Output Voltage Drift (Note2) V/T Unit V mV IO = 5mA to 1.0A - 12 100 IO = 250mA to 750mA - 5 50 mV TJ =+25C - 5.1 6.0 VI = 15V to 30V, TJ=+25C - 0.8 VI = 14V to 27V, IO = 500mA - 0.8 IO = 5mA to 1.0A - IO = 5mA - -1.0 - mV/C mA mA 0.5 Output Noise Voltage VN f = 10Hz to 100kHz TA =+25C - 10 - V/Vo Ripple Rejection (Note2) RR f = 120Hz, IO = 500mA VI = 14V to 24V - 60 - dB IO = 1A, TJ =+25C - 2.0 - V Dropout Voltage VDrop Output Resistance (Note2) rO f = 1kHz - 18 - m Short Circuit Current ISC VI= 35V, TA =+25C - 250 - mA Peak Current (Note2) IPK TJ=+25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 14 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7815AE) (Continued) (Refer to the test circuits. 0C < TJ < 125C, Io =1A, V I =23V, C I=0.33F, CO=0.1F, unless otherwise specified) Parameter Output Voltage Line Regulation (Note1) Symbol VO Regline Conditions Min. Typ. Max. TJ =+25C 14.7 15 15.3 IO = 5mA to 1A, PO 15W VI = 17.7V to 30V 14.4 15 15.6 VI = 17.9V to 30V, IO = 500mA - 10 150 VI = 20V to 26V - 5 150 VI = 17.5V to 30V - 11 150 VI = 20V to 26V - 3 75 - 12 100 IO = 5mA to 1.0A - 12 100 IO = 250mA to 750mA - 5 50 TJ =+25C - 5.2 6.0 VI = 17.5V to 30V, TJ =+25C - - 0.8 VI = 17.5V to 30V, IO = 500mA - - 0.8 IO = 5mA to 1.0A - - 0.5 IO = 5mA - -1.0 - mV/C TJ =+25C Load Regulation (Note1) Quiescent Current TJ =+25C, IO = 5mA to 1.5A Regload IQ Quiescent Current Change IQ Output Voltage Drift (Note2) V/T Unit V mV mV mA mA Output Noise Voltage VN f = 10Hz to 100kHz TA =+25C - 10 - V/Vo Ripple Rejection (Note2) RR f = 120Hz, IO = 500mA VI = 18.5V to 28.5V - 58 - dB IO = 1A, TJ =+25C - 2.0 - V Dropout Voltage VDrop Output Resistance (Note2) rO f = 1kHz - 19 - m Short Circuit Current ISC VI = 35V, TA =+25C - 250 - mA Peak Current (Note2) IPK TJ =+25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 15 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7818AE) (Continued) (Refer to the test circuits. 0C < TJ < 125C, Io =1A, V I = 27V, C I=0.33F, C O=0.1F, unless otherwise specified) Parameter Output Voltage Line Regulation (Note1) Symbol VO Regline Conditions Min. Typ. Max. TJ =+25C 17.64 18 18.36 IO = 5mA to 1A, PO 15W VI = 21V to 33V 17.3 18 18.7 VI= 21V to 33V, IO = 500mA - 15 180 VI= 21V to 33V - 5 180 VI= 20.6V to 33V - 15 180 VI= 24V to 30V - 5 90 - 15 100 TJ =+25C Load Regulation (Note1) Quiescent Current TJ =+25C, IO = 5mA to 1.5A Regload IQ Quiescent Current Change IQ Output Voltage Drift (Note2) V/T Unit V mV IO = 5mA to 1.0A - 15 100 IO = 250mA to 750mA - 7 50 mV TJ =+25C - 5.2 6.0 VI = 21V to 33V, TJ=+25C - - 0.8 VI = 21V to 33V, IO = 500mA - - 0.8 IO = 5mA to 1.0A - - 0.5 IO = 5mA - -1.0 - mV/C mA mA Output Noise Voltage VN f = 10Hz to 100kHz TA =+25C - 10 - V/Vo Ripple Rejection (Note2) RR f = 120Hz, IO = 500mA VI = 22V to 32V - 57 - dB IO = 1A, TJ =+25C - 2.0 - V Dropout Voltage VDrop Output Resistance (Note2) rO f = 1kHz - 19 - m Short Circuit Current ISC VI= 35V, TA =+25C - 250 - mA Peak Current (Note2) IPK TJ=+25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 16 MC78XXE/LM78XXE/MC78XXAE Electrical Characteristics (MC7824AE) (Continued) (Refer to the test circuits. 0C < TJ < 125C, Io =1A, V I = 33V, C I=0.33F, CO=0.1F, unless otherwise specified) Parameter Symbol Conditions Min. Typ. Max. 23.5 24 24.5 23 24 25 VI= 27V to 38V, IO = 500mA - 18 240 VI= 21V to 33V - 6 240 VI= 26.7V to 38V - 18 240 VI= 30V to 36V - 6 120 - 15 100 TJ =+25C Output Voltage Line Regulation (Note1) VO Regline IO = 5mA to 1A, PO 15W VI = 27.3V to 38V TJ =+25C Load Regulation (Note1) Quiescent Current TJ =+25C, IO = 5mA to 1.5A Regload IQ Quiescent Current Change IQ Output Voltage Drift (Note2) V/T Unit V mV IO = 5mA to 1.0A - 15 100 IO = 250mA to 750mA - 7 50 mV TJ =+25C - 5.2 6.0 VI = 27.3V to 38V, TJ =+25C - - 0.8 VI = 27.3V to 38V, IO = 500mA - - 0.8 IO = 5mA to 1.0A - - 0.5 IO = 5mA - -1.5 - mV/C mA mA Output Noise Voltage VN f = 10Hz to 100kHz TA = 25C - 10 - V/Vo Ripple Rejection (Note2) RR f = 120Hz, IO = 500mA VI = 28V to 38V - 54 - dB IO = 1A, TJ =+25C - 2.0 - V Dropout Voltage VDrop Output Resistance (Note2) rO f = 1kHz - 20 - m Short Circuit Current ISC VI = 35V, TA =+25C - 250 - mA Peak Current (Note2) IPK TJ =+25C - 2.2 - A Note: 1. Load and line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. 2. These parameters, although guaranteed, are not 100% tested in production. 17 MC78XXE/LM78XXE/MC78XXAE Typical Perfomance Characteristics I 18 Figure 1. Quiescent Current Figure 2. Peak Output Current Figure 3. Output Voltage Figure 4. Quiescent Current MC78XXE/LM78XXE/MC78XXAE Typical Applications 3 1 MC78XXE/LM78XXE Input Output 2 CO 0.1uF CI 0.33uF Figure 5. DC Parameters 3 1 MC78XXE/LM78XXE Output Input 270pF RL 2 VO 2N6121 OR EQ. 0.33uF OV VO 30uS 100 Figure 6. Load Regulation 5.1 1 MC78XXE/LM78XXE 3 Output Input 2 0.33uF RL 470uF + 120Hz Figure 7. Ripple Rejection 3 1 MC78XXE/LM78XXE Input Output 2 CI 0.33uF CO 0.1uF Figure 8. Fixed Output Regulator 19 MC78XXE/LM78XXE/MC78XXAE 1 Input MC78XXE/LM78XXE 3 2 0.1uF CO IQ 0.33uF Output R1 VXX IO RL VXX + IQ R1 IO = Figure 9. Constant Current Regulator Notes: (1) To specify an output voltage. substitute voltage value for "XX." A common ground is required between the input and the Output voltage. The input voltage must remain typically 2.0V above the output voltage even during the low point on the input ripple voltage. (2) CI is required if regulator is located an appreciable distance from power Supply filter. (3) CO improves stability and transient response. 1 Input 3 Output MC78XXE/LM78XXE VXX 2 0.1uF Cl R1 Co IQ 0.33uF R2 IRI 5IQ VO = VXX(1+R2/R1)+IQR2 Figure 10. Circuit for Increasing Output Voltage 1 Input MC7805E LM7805E 3 Output 2 Cl 0.33uF _ 6 2 0.1uF LM741 3 4 + Co 10k IRI 5IQ VO = VXX(1+R2/R1)+IQR2 Figure 11. Adjustable Output Regulator (7 to 30V) 20 MC78XXE/LM78XXE/MC78XXAE Q1 BD536 Input IQ1 R1 1 3 3 MC78XXE/LM78XXE Output IREG IO 2 0.1uF 0.33uF R1 = VBEQ1 IREG - IQ1 BQ1 IO = IREG+BQ1(IREG - VBEO1/R1) Figure 12. High Current Voltage Regulator Q1 RSC Input Q2 R1 3 Output MC78XXE/LM78XXE 3 2 0.1uF 0.33uF Q1 = TIP42 Q2 = TIP42 VBEQ2 RSC= I SC Figure 13. High Output Current with Short Circuit Protection 1 VI 3 VO MC78XXE/LM78XXE 2 0.33uF 0.1uF 4.7K COMMON 7 6 _ COMMON 2 LM741 + 4 3 4.7K -VIN TIP42 -VO Figure 14. Tracking Voltage Regulator 21 MC78XXE/LM78XXE/MC78XXAE 1 3 MC7815E +20V +15V 2 1N4001 0.1uF 0.33uF 1uF + + 2.2uF 1N4001 1 MC7915E 2 -20V 3 -15V Figure 15. Split Power Supply ( 15V-1A) Output Input + 0.1uF 2 1 MC78XXE/LM78XXE Figure 16. Negative Output Voltage Circuit 1mH Output Input 470 4.7 Z1 1 3 MC78XXE/LM78XXE + 0.33uF 2 10uF 0.5 Figure 17. Switching Regulator 22 + 2000uF MC78XXE/LM78XXE/MC78XXAE Mechanical Dimensions Package Dimensions in millimeters TO-220 4.50 0.20 2.80 0.10 (3.00) +0.10 1.30 -0.05 18.95MAX. (3.70) o3.60 0.10 15.90 0.20 1.30 0.10 (8.70) (1.46) 9.20 0.20 (1.70) 9.90 0.20 (45 1.52 0.10 0.80 0.10 2.54TYP [2.54 0.20] 10.08 0.30 (1.00) 13.08 0.20 ) 1.27 0.10 +0.10 0.50 -0.05 2.40 0.20 2.54TYP [2.54 0.20] 10.00 0.20 23 MC78XXE/LM78XXE/MC78XXAE Mechancal Dimensions (Continued) Package Dimensions in millimeters D-PAK MIN0.55 0.91 0.10 9.50 0.30 0.50 0.10 0.76 0.10 0.50 0.10 1.02 0.20 2.30TYP [2.300.20] (3.05) (2XR0.25) (0.10) 2.70 0.20 6.10 0.20 9.50 0.30 0.76 0.10 24 (1.00) 6.60 0.20 (5.34) (5.04) (1.50) (0.90) 2.30 0.20 (0.70) 2.30TYP [2.300.20] (0.50) 2.30 0.10 0.89 0.10 MAX0.96 (4.34) 2.70 0.20 0.80 0.20 0.60 0.20 (0.50) 6.10 0.20 5.34 0.30 0.70 0.20 6.60 0.20 MC78XXE/LM78XXE/MC78XXAE Ordering Information Product Number Output Voltage Tolerance Package Operating Temperature LM7805ECT 4% TO-220 0 ~ +125C Product Number Output Voltage Tolerance Package Operating Temperature MC7805ECT MC7806ECT MC7808ECT MC7809ECT TO-220 MC7812ECT MC7815ECT MC7818ECT 4% MC7824ECT MC7805ECDT MC7806ECDT MC7808ECDT D-PAK 0 ~ +125C MC7809ECDT MC7812ECDT MC7805AECT MC7806AECT MC7808AECT MC7809AECT MC7812AECT 2% TO-220 MC7815AECT MC7818AECT MC7824AECT 25 MC78XXE/LM78XXE/MC78XXAE DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 10/20/03 0.0m 001 Stock#DSxxxxxxxx 2003 Fairchild Semiconductor Corporation