Dimensions in mm Connectors according to DIN 41612 / IEC 60603-2 Type B Female connector Hole pattern Press-fit technology - Performance level II Termination length No. of contacts 32 32 Contact arrangement a b 4 3 2 1 4 3 2 1 4 3 2 1 a b 64 Part number 302-63014-02 302-65015-03 302-65016-04 102-63024-xx 102-65025-xx 102-65026-xx 302-63064-02 302-65065-03 302-65066-04 Accessories - Press-fit tool (see page 208) - Support tool (see page 209) - Coding accessories (see page 160) On request - Performance levels I + III or customer-specific - Special contact length - Alternative surface Sn, e. g. for WireWrap Options - Without flange - Contact arrangement (see page 162) Note - * Rear mating zone performance level II Ordering note Only for 102 - PCB 1.5 to 2.0 mm = xxx-xxxxx-01 with termination length = 3.2 mm - PCB 2.0 to 2.8 mm = xxx-xxxxx-02 with termination length = 4.6 mm - PCB > 2.8 mm = xxx-xxxxx-03 with termination length = 4.6 mm Cross reference - Type B with IDC (see page 156) 86 ept GmbH I Phone +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-mail sales@ept.de I www.ept.de Connectors according to DIN 41612 / IEC 60603-2 Type B Female connector Solder technology - Performance level II Termination length Manual soldering with solder lug No. of contacts 32 Contact arrangement a b 4 102-40024 - - 302-40064-05 302-40064-01 302-40064-02 in THTR* in THTR* 102-40026 102-40044 302-40065-03 102-40074 3 2 1 64 4 Part number 3 2 1 302-40064-05TH 302-40064-01TH Accessories - Coding accessories (see page 160) On request - Performance levels I + III or customer-specific - Special contact length - Other termination lengths in THTR Cross reference - Type B with IDC (see page 156) Note - * THTR (Through Hole Technology Reflow) in THTR* 302-40064-02TH Options - Board lock (see page 159) - Contact arrangement (see page 162) ept GmbH I Phone +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-mail sales@ept.de I www.ept.de 87