VS-10BQ015HM3/5BT - VISHAY

VS-10BQ015HM3

www.vishay.com Vishay Semiconductors

Revision: 10-Mar-16 1Document Number: 95722

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

High Performance Schottky Rectifier, 1.0 A

FEATURES

• Low forward voltage drop

• Guard ring for enhanced ruggedness and long

term reliability

• 125 °C TJ operation (VR < 5 V)

• Optimized for OR-ing applications

• High frequency operation

• High purity, high temperature epoxy encapsulation for

enhanced mechanical strength and moisture resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

• Meets JESD 201 class 2 whisker test

• AEC-Q101 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

DESCRIPTION

The VS-10BQ015HM3 surface mount Schottky rectifier has

been designed for applications requiring low forward drop

and very small foot prints on PC boards. The proprietary

barrier technology allows for reliable operation up to 125 °C

junction temperature. Typical applications are in disk drives,

switching power supplies, converters, freewheeling diodes,

battery charging, and reverse battery protection.

PRODUCT SUMMARY

Package SMB

IF(AV) 1.0 A

VR15 V

VF at IF0.21 V

IRM 35 mA at 100 °C

TJ max. 125 °C

Diode variation Single die

EAS 1.0 mJ

Cathode Anode

MAJOR RATINGS AND CHARACTERISTICS

SYMBOL CHARACTERISTICS VALUES UNITS

IF(AV) Rectangular waveform 1.0 A

VRRM 15 V

IFSM tp = 5 μs sine 140 A

VF1.0 Apk, TJ = 125 °C 0.21 V

TJRange -55 to +125 °C

VOLTAGE RATINGS

PARAMETER SYMBOL VS-10BQ015HM3 UNITS

Maximum DC reverse voltage VR15 V

Maximum working peak reverse voltage VRWM 25

ABSOLUTE MAXIMUM RATINGS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum average forward current 

See fig. 5 IF(AV) 50 % duty cycle at TL = 134 °C, rectangular waveform 1.0 A

Maximum peak one cycle

non-repetitive surge current

See fig. 7

IFSM

5 μs sine or 3 μs rect. pulse Following any rated load

condition and with rated

VRRM applied

140

10 ms sine or 6 ms rect. pulse 40

Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1 A, L = 2 mH 1.0 mJ

Repetitive avalanche current IAR

Current decaying linearly to zero in 1 μs

Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A

VS-10BQ015HM3

www.vishay.com Vishay Semiconductors

Revision: 10-Mar-16 2Document Number: 95722

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Pulse width = 300 μs, duty cycle = 2 %

Notes

(1) thermal runaway condition for a diode on its own heatsink

(2) Mounted 1" square PCB

ELECTRICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum forward voltage drop

See fig. 1 VFM (1)

1 A TJ = 25 °C 0.33

2 A 0.39

1 A TJ = 125 °C 0.21

2 A 0.29

Maximum reverse leakage current

See fig. 2 IRM

TJ = 25 °C VR = Rated VR

0.5 mA

TJ = 100 °C 35

Threshold voltage VF(TO) TJ = TJ maximum -V

Forward slope resistance rt-m

Typical junction capacitance CTVR = 5 VDC, (test signal range 100 kHz to 1 MHz), 25 °C 390 pF

Typical series inductance LSMeasured lead to lead 5 mm from package body 2.0 nH

Maximum voltage rate of change dV/dt Rated VR10 000 V/μs

THERMAL - MECHANICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum junction temperature range TJ (1) -55 to +125 °C

Maximum storage temperature range TStg -55 to +150

Maximum thermal resistance, 

junction to lead RthJL (2) DC operation

See fig. 4 36

°C/W

Maximum thermal resistance, 

junction to ambient RthJA DC operation 80

Approximate weight 0.10 g

0.003 oz.

Marking device Case style SMB (similar to DO-214AA) 1C

dPtot

dTJ

------------- 1

RthJA

--------------<

VS-10BQ015HM3

www.vishay.com Vishay Semiconductors

Revision: 10-Mar-16 3Document Number: 95722

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Peak Reverse Current vs. Reverse Voltage

Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage

Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)

VFM - Forward Voltage Drop (V)

IF - Instantaneous Forward Current (A)

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8

0.1

Tj = 25°C

TJ = 100 °C

TJ = 125 °C

TJ = 75 °C

Reverse Voltage (V)

IR - Reverse Current (mA)

0 3 6 9 12 15

0.01

0.1

100

25 °C

100 °C

75 °C

50 °C

1000

100

VR - Reverse Voltage (V)

CT - Junction Capacitance (pF)

15312

t1 - Rectangular Pulse Duration (s)

ZthJC - Thermal Impedance (°C/W)

0.1

0.00001 0.0001 0.001 0.01 0.1 1 10 100

100

Single pulse

(thermal resistance)

D = 0.75

D = 0.50

D = 0.33

D = 0.25

D = 0.20

PDM

Notes:

1. Duty factor D = t1/t2

2. Peak TJ = PDM x ZthJC + TC

VS-10BQ015HM3

www.vishay.com Vishay Semiconductors

Revision: 10-Mar-16 4Document Number: 95722

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 5 - Maximum Average Forward Current vs.

Allowable Lead Temperature

Fig. 6 - Maximum Average Forward Dissipation vs.

Average Forward Current

Fig. 7 - Maximum Non-Repetitive Surge Current

Note

(1) Formula used: TC = TJ - (Pd + PdREV) x RthJC;

Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); 

PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR

F(AV)

Average

Forward Current (A)

Allowable Case Temperature (°C)

0.0 0.3 0.6 0.9 1.2 1.5

100

110

Square wave (D = 0.50)

80 % rated VR applied

see note (1)

D = 0.75

D = 0.20

D = 0.25

D = 0.33

D = 0.50

IF(AV) - Average Forward Current (A)

Average Power Loss (W)

0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6

0.1

0.2

0.3

0.4

D = 0.75

D = 0.20

D = 0.25

D = 0.33

D = 0.50

RMS limit

tp - Square Wave Pulse Duration (µs)

100

1000

IFSM - Non-Repetitive Surge Current (A)

10 100 1000 10 000

At any rated load condition and

with rated VRRM applied

following surge

VS-10BQ015HM3

www.vishay.com Vishay Semiconductors

Revision: 10-Mar-16 5Document Number: 95722

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ORDERING INFORMATION TABLE

ORDERING INFORMATION (Example)

PREFERRED P/N PREFERRED PACKAGE CODE MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION

VS-10BQ015HM3/5BT 5BT 3200 13" diameter plastic tape and reel

LINKS TO RELATED DOCUMENTS

Dimensions www.vishay.com/doc?95401

Part marking information www.vishay.com/doc?95403

Packaging information www.vishay.com/doc?95404

SPICE model www.vishay.com/doc?95666

2- Current rating

3- B = SMB

4- Q = Schottky “Q” series

5- Voltage rating (015 = 15 V)

6- H = AEC-Q101 qualified

1- Vishay Semiconductors product

Device code

51 32 4 76

VS- 10 B Q 015 M3H

- Environmental digit:

M3 = halogen-free, RoHS compliant and terminations lead (Pb)-free

Document Number: 95401 For technical questions within your region, please contact one of the following: www.vishay.com

Revision: 09-Jul-10 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1

SMB

Outline Dimensions

Vishay Semiconductors

DIMENSIONS in inches (millimeters)

Cathode band

DO-214AA (SMB)

0.086 (2.20)

0.077 (1.95)

0.155 (3.94)

0.130 (3.30)

0.180 (4.57)

0.160 (4.06)

0.012 (0.305)

0.006 (0.152)

0.008 (0.2)

0 (0)

0.220 (5.59)

0.205 (5.21)

0.060 (1.52)

0.030 (0.76)

0.096 (2.44)

0.084 (2.13)

Mounting Pad Layout

0.086 (2.18) MIN.

0.060 (1.52) MIN.

0.085 (2.159) MAX.

0.220 (5.59) REF.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.