Datasheet
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Surface mount type photo diode (Topview)
RPMD-0100
*1 Reflow solder profile
• Other general-purpose applicat ions
1) Dimensions 2.0×1.2×0.85mm (L×W×H)
2) Visible light - blocking resin (<750nm)
3) Supports lead- free solders
4) RoHS directive
°C
Absolute maximum rati ngs (T
a
= 25°C)
Reverse voltage
Power dissipation
Operating temperat ur e
Storag e t em perature
mW
°C
UnitValue
P
D
T
opr
60
30
V
Outline
Soldering t em per ature
40 to 100
T
stg
T
sd
260 °C *
1
V
R
40 to 85
SymbolParameter
Applications
Dimensions (Unit : mm)
Features
• Household applications
• OAs, FAs
1.6
1
0.85
0.28
0.85±0.1
2±0.1
1.5
0.87
1.2±0.1
0.6
1 2
12
Note : Unspecified tolerance shall be ±0.15.
Internal connection diagram
Anode Cathode
Cathode m ark
1/4 2017.03 - Rev.B
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Datasheet
RPMD-0100
- 100 -
ns
- 100 -
Fall time tf =850nm
Response time VR =10V, RL =1k
trRise time
Capacitance CjpF
Peak emission wavelength p
- 1.5 -
Reverse light current Ira
Reverse dark current Id
Reverse breakdown voltage VBR V60 - -
6-10
Spectrum half width nm
0.5
VR =5V, f=1MHz
deg
--nm940
800 to 1050
Half angle 1/2 -60 -
Ee =0mW/cm2
V
VR =5V, =940nm
Ee =0mW/cm2
nA
-
0.5
1.1
-6
VR =10V
IR =100A
Ee =1mW/cm2
A
Electrical specification (Ta = 25°C)
-
VFIF =50mA
Parameter Conditions
Forward voltage
Symbol Typ. Unit
Max.Min.
Values
2/4 2017.03 - Rev.B
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Datasheet
RPMD-0100
Electrical and opt i cal charact eri st ics curves
Fig.1 Illuminance vs. Photocurrent
Fig.3 Forward Voltage vs. Forward Current
Ira [A]
Forward Current : IF[mA]
Fig.2 Reverse Voltage vs. Photocurrent
Reverse Voltage : VR[V]
Ira [A]
Illuminanc e : Ee [m W /cm 2]
Foward Voltage : VF[V]
Fig.4 Spectral Sensitivity
Relative Spectral Sensitivit y : [%]
Optical Wavelength : [nm]
0
5
10
15
20
25
30
35
40
45
50
0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
75°C
25°C
0°C
25°C
50°C
0.0
0.5
1.0
1.5
2.0
2.5
10 15 20 25 30 35 40
75°C
25°C
0°C
25°C
50°C
0%
25%
50%
75%
100%
730 770 810 850 890 930 970 1010
0
2
4
6
8
10
12
0 0.2 0.4 0.6 0.8 1
VR=0V
VR=5V
VR=10V
3/4 2017.03 - Rev.B
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Datasheet
RPMD-0100
Electrical and opt i cal charact eri st ics curves
Fig.5 Radiant Intensity
Relative Sensitivit y : [%]
[°]
0%
25%
50%
75%
100%
-90-70-50-30-101030507090
x-axis
y-axis
4/4 2017.03 - Rev.B
R1102
A
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
The information contained herein is subject to change without notice.
Before you use our Products, please contact our sales representative
and verify the latest specifica-
tions :
Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
The Products specified in this document are not designed to be radiation tolerant.
For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
