Type PFC Power Factor Correction Capacitors Type PFC capacitors are constructed with low loss self healing metallized polypropylene, delta connected internally for 3-phase operation and packaged in a cylindrical metal case with an easyaccess terminals. Type PFC is safety protected with an internal pressure interrupter that disengages all 3 phases in the event of capacitor overload or end of life. Type PFC also come equiped with easy access, easily replaceable discharge resistors. Highlights Specifications - Automatic PFC equipment - Wind turbine applications - Individual and group fixed PFC - Tuned and detuned capacitor banks - Power line conditioning Capacitance Tolerance 0 to +10% Rated Voltage 240 Vac, 480 Vac, 600 Vac Operating Temperature Range with Ripple -40 C to +55 C kvar Range 0.5 kvar to 30.2 kvar Maximum Permissible Voltage (Vmax) 110% of rated rms voltage 120% of rated peak voltage (1.2 x 2x Vrms) Internal Connection Delta () Maximum Permissible Current (Imax) 135% of nominal rms current based on rated kvar and rated voltage - (up to 150% of lR including combined effects of harmonics, over voltages and capacitances, tolerance) Life 60,000 h w/94% survival rate International Standards Meets IEEE18, Standard (ANSI/IEEE Standard 18) FIT (Failure In Time) 300 x 109 component h Maximum Short Circuit Current 10 kA (according to UL 810) Dimensions Construction Details Case Material Extruded aluminum with steel or aluminum cover Encapsulation Environmentally safe dielectric fluid Terminal Material Tin plated copper, brass or steel 1.75" 0.05" 1.32" 0.05" Figure 1 Figure 2 CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 1 Type PFC Power Factor Correction Capacitors Part Numbering System PFC H Type T 480 C 6 S 779 T Base Type Voltage Case Material kvar Tolerance Can Height Phases (%) (inches) S = -0/+10% Expressed as 3 digit (Vac) PFC S = Std. S = 2" Round H = Harmonic T = 21/2" Round V = 3" Round 24 = 240 C = Aluminum case Full kvar value 48 = 480 w/steel cover including decimals number of the case height 60 = 600 M12 Stud @ 60 Hz and from base to top of lip X = 3.5" Round Ratings D = Aluminum case (including seam) rounded w/aluminum cover and displayed without M12 Stud decimal point T = 3-Phase NOTE: Other ratings, sizes and performance specifications are available. Contact us. Max Power (W) CDE Catalog Number 60Hz Output Kvar 50Hz Output Kvar Capacitance (F) Rs (m) Rth (C/W) 55C PFCHS24C0.5S572T 0.5 0.4 3 x 7.7 5.8 6.6 4.5 1 0.8 3 x 15.4 4.2 6.6 1.5 1.3 3 x 23.0 3.7 2 1.7 3 x 30.7 2.5 2.1 PFCHT24C3S572T 3 PFCHT24C4S778T 4 PFCHV24D5S842T PFCHV24D6S842T Case 70C Diameter (in) Height (in) SA (in2) 3.0 2.3 2.0 5.72 42 4.5 3.0 2.3 2.0 5.72 42 6.6 4.5 3.0 2.3 2.0 5.72 42 3.4 5.1 5.9 3.9 2.9 2.5 5.72 55 3 x 38.4 3.2 5.1 5.9 3.9 2.9 2.5 5.72 55 2.5 3 x 46.1 3.1 5.1 5.9 3.9 2.9 2.5 5.72 55 3.3 3 x 61.4 4.5 4.0 7.6 5.1 3.8 2.5 7.78 71 5 4.2 3 x 76.8 1.8 3.0 10.0 6.7 5.0 3.0 8.42 94 6 5.0 3 x 92.1 1.7 3.0 10.0 6.7 5.0 3.0 8.42 94 PFCHV24D6.3S842T 6.3 5.3 3 x 96.7 1.6 3.0 10.0 6.7 5.0 3.0 8.42 94 PFCHV24D7.5S108T 7.5 6.3 3 x 115.1 2.2 2.4 12.4 8.3 6.2 3.0 10.78 116 PFCHV24D8.3S108T 8.3 6.9 3 x 127.4 2.1 2.4 12.4 8.3 6.2 3.0 10.78 116 PFCHX24D10S108T 10 8.3 3 x 153.5 2.0 2.0 14.8 9.8 7.4 3.5 10.78 138 12.5 10.4 3 x 191.9 1.8 2.0 14.8 9.8 7.4 3.5 10.78 138 15 12.5 3 x 230.3 2.4 1.7 18.2 12.2 9.1 3.5 13.73 170 PFCHX24D16.7S137T 16.7 13.9 3 x 256.4 2.3 1.7 18.2 12.2 9.1 3.5 13.73 170 PFCHX24D17.5S137T 17.5 14.6 3 x 268.6 2.2 1.7 18.2 12.2 9.1 3.5 13.73 170 PFCHS48C0.5S572T 0.5 0.4 3 x 1.9 11.3 6.6 4.5 3.0 2.3 2.0 5.72 42 1 0.8 3 x 3.8 6.9 6.6 4.5 3.0 2.3 2.0 5.72 42 1.5 1.3 3 x 5.8 5.4 6.6 4.5 3.0 2.3 2.0 5.72 42 65C Style 240 Vac PFCHS24C1S572T PFCHS24C1.5S572T PFCHT24C2S572T PFCHT24C2.5S572T PFCHX24D12.5S108T PFCHX24D15S137T Fig. 1 Fig. 2 480 Vac PFCHS48C1S572T PFCHS48C1.5S572T PFCHS48C2S572T 2 1.7 3 x 7.7 4.7 6.6 4.5 3.0 2.3 2.0 5.72 42 2.5 2.1 3 x 9.6 4.3 6.6 4.5 3.0 2.3 2.0 5.72 42 PFCHS48C3S572T 3 2.5 3 x 11.5 4.0 6.6 4.5 3.0 2.3 2.0 5.72 42 PFCHT48C4S572T 4 3.3 3 x 15.4 3.6 5.1 5.9 3.9 2.9 2.5 5.72 55 PFCHT48C5S572T 5 4.2 3 x 19.2 3.4 5.1 5.9 3.9 2.9 2.5 5.72 55 PFCHS48C2.5S572T 2 Fig. 1 CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 Type PFC Power Factor Correction Capacitors CDE Catalog Number 60Hz Output Kvar 50Hz Capacitance Rs Output (F) (m) Kvar Rth (C/W) Max Power (W) 55C 65C Case 70C Diameter (in) Height (in) SA (in2) Style 480 Vac PFCHT48C6S778T 6 5.0 3 x 23.0 5.3 4.0 7.6 5.1 3.8 2.5 7.78 71 PFCHT48C7.5S778T 7.5 6.3 3 x 28.8 4.9 4.0 7.6 5.1 3.8 2.5 7.78 71 PFCHT48C8.3S778T 8.3 6.9 3 x 31.9 4.8 4.0 7.6 5.1 3.8 2.5 7.78 71 PFCHV48D9S842T 9 7.5 3 x 34.5 2.2 3.0 10.0 6.7 5.0 3.0 8.42 94 PFCHV48D10S842T 10 8.3 3 x 38.4 2.1 3.0 10.0 6.7 5.0 3.0 8.42 94 PFCHV48D12.5S108T 12.5 10.4 3 x 48.0 2.8 2.4 12.4 8.3 6.2 3.0 10.78 116 PFCHV48D15S108T 15 12.5 3 x 57.6 2.6 2.4 12.4 8.3 6.2 3.0 10.78 116 PFCHX48D16.7S108T 16.7 13.9 3 x 64.1 2.4 2.0 14.8 9.8 7.4 3.5 10.78 138 PFCHX48D18S108T 18 15.0 3 x 69.1 2.3 2.0 14.8 9.8 7.4 3.5 10.78 138 PFCHX48D20S108T 20 16.7 3 x 76.8 2.2 2.0 14.8 9.8 7.4 3.5 10.78 138 PFCHX48D25S137T 25 20.8 3 x 95.9 2.9 1.7 18.2 12.2 9.1 3.5 13.73 170 PFCHX48D30S137T 30 25.0 3 x 115.1 2.7 1.7 18.2 12.2 9.1 3.5 13.73 170 PFCHS60C1S572T 1 0.8 3 x 2.5 7.4 6.6 4.5 3.0 2.3 2.0 5.72 42 PFCHS60C1.5S572T 1.5 1.3 3 x 3.7 5.9 6.6 4.5 3.0 2.3 2.0 5.72 42 PFCHS60C2S572T 2 1.7 3 x 4.9 5.1 6.6 4.5 3.0 2.3 2.0 5.72 42 PFCHS60C2.5S572T 2.5 2.1 3 x 6.1 4.6 6.6 4.5 3.0 2.3 2.0 5.72 42 PFCHT60C3S572T 3 2.5 3 x 7.4 4.2 5.1 5.9 3.9 2.9 2.5 5.72 55 PFCHT60C4S572T 4 3.3 3 x 9.8 3.8 5.1 5.9 3.9 2.9 2.5 5.72 55 PFCHT60C5S778T 5 4.2 3 x 12.3 5.9 4.0 7.6 5.1 3.8 2.5 7.78 71 Fig. 1 Fig. 2 600Vac PFCHT60C6S778T 6 5.0 3 x 14.7 5.5 4.0 7.6 5.1 3.8 2.5 7.78 71 PFCHT60C6.1S778T 6.1 5.1 3 x 15.0 5.5 4.0 7.6 5.1 3.8 2.5 7.78 71 PFCHT60C6.3S778T 6.3 5.3 3 x 15.5 5.4 4.0 7.6 5.1 3.8 2.5 7.78 71 PFCHT60C6.9S778T 6.9 5.8 3 x 16.9 5.3 4.0 7.6 5.1 3.8 2.5 7.78 71 PFCHV60D7.5S842T 7.5 6.3 3 x 18.4 2.6 3.0 10.0 6.7 5.0 3.0 8.42 94 PFCHV60D8.1S842T 8.1 6.8 3 x 19.9 2.5 3.0 10.0 6.7 5.0 3.0 8.42 94 PFCHV60D8.3S842T 8.3 6.9 3 x 20.4 2.5 3.0 10.0 6.7 5.0 3.0 8.42 94 PFCHV60D10S108T 10 8.3 3 x 24.6 3.6 2.4 12.4 8.3 6.2 3.0 10.78 116 PFCHV60D12.2S108T 12.2 10.2 3 x 30.0 3.1 2.4 12.4 8.3 6.2 3.0 10.78 116 PFCHV60D12.5S108T 12.5 10.4 3 x 30.7 3.1 2.4 12.4 8.3 6.2 3.0 10.78 116 PFCHX60D13.8S108T 13.8 11.5 3 x 33.9 2.9 2.0 14.8 9.8 7.4 3.5 10.78 138 PFCHX60D14.6S108T 14.6 12.2 3 x 35.9 2.8 2.0 14.8 9.8 7.4 3.5 10.78 138 PFCHX60D15S108T 15 12.5 3 x 36.8 2.8 2.0 14.8 9.8 7.4 3.5 10.78 138 PFCHX60D16.7S108T 16.7 13.9 3 x 41.0 2.6 2.0 14.8 9.8 7.4 3.5 10.78 138 PFCHX60D17.5S108T 17.5 14.6 3 x 43.0 2.5 2.0 14.8 9.8 7.4 3.5 10.78 138 PFCHX60D20S137T 20 16.7 3 x 49.1 3.6 1.7 18.2 12.2 9.1 3.5 13.73 170 PFCHX60D22.5S137T 22.5 18.8 3 x 55.3 3.4 1.7 18.2 12.2 9.1 3.5 13.73 170 PFCHX60D25S137T 25 20.8 3 x 61.4 3.2 1.7 18.2 12.2 9.1 3.5 13.73 170 Fig. 1 Fig. 2 CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830 3 Type PFC Power Factor Correction Capacitors Performance Notes Rs: Equivalent series resistance - Ohmic resistances (Ohm) Dielectric Dissipation Factor: tan (Polypropylene: 0.0002) Ths : Hot spot temperature within the capacitor: Ths = Ta + (Ptotal * 280 / SA) Ta: Ambient temperature Rth: Thermal resistance: C/ Watt, indicates hot spot temperature rise due to power dissipation losses Pmax: Maximum power dissipation: Pmax = (85 C - Ta) / Rth (Watts) given Voltage PTotal: Total Power generated by Dielectric and Ohmic Losses: P = Vpeak2 . C . TT . F .DF (Watts) Where PTotal = PFund + PHarm1 + PHarm2 + .... + PHarm Design life: 60,000 hours 94% survival Ths: 85 C P = I2 . [Rs + (XC. DF)] (Watts) given Current Expected lifetime vs. applied voltage spottemperature temperature Expected lifetime vs. applied voltageand andhot ambient 1.2 Applied voltage (Va/Vr) 1.15 85 C 80 C 70 C 60 C 1.1 1.05 1 0.95 0.9 0.85 0.8 1000 10000 100000 1000000 Expected life time (h) Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the "Information") in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ("Cornell Dubilier") has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter - and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. 4 CDE Cornell Dubilier * 1605 E. Rodney French Blvd. * New Bedford, MA 02744 * Phone: (508)996-8561 * Fax: (508)996-3830